Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - '14 AGM 1SS/1LE Track build [COTW 11/17/14]

X25 · 12-15-2015, 06:32 AM

There were a few parts that I was not happy with on my car. I still had polyurethane bushings as rear subframe bushings and on the rear knuckle. I ended up getting delrin bushings for the knuckle side, and while at it, also got their aluminum solid subframe bushings and the camber plates for a package deal. Their parts look to be similar to Pfadt design, so the camber plates will not increase ride height. Looking forward to trying them all out; I'll soon have no polyurethane bushing left on my car

Delrin bushings:
http://pegasuscnc.com/5th-GEN-CAMARO...gs-Delrin.html

Camber plates:
http://pegasuscnc.com/5th-GEN-CAMARO...-Aluminum.html

Solid subframe bushings:
http://pegasuscnc.com/5th-GEN-CAMARO...-Aluminum.html

12-15-2015, 06:32 AM	#522
X25 Drives: '16 C7 Z51 Join Date: May 2012 Location: Redmond, WA Posts: 3,056	There were a few parts that I was not happy with on my car. I still had polyurethane bushings as rear subframe bushings and on the rear knuckle. I ended up getting delrin bushings for the knuckle side, and while at it, also got their aluminum solid subframe bushings and the camber plates for a package deal. Their parts look to be similar to Pfadt design, so the camber plates will not increase ride height. Looking forward to trying them all out; I'll soon have no polyurethane bushing left on my car Delrin bushings: http://pegasuscnc.com/5th-GEN-CAMARO...gs-Delrin.html Camber plates: http://pegasuscnc.com/5th-GEN-CAMARO...-Aluminum.html Solid subframe bushings: http://pegasuscnc.com/5th-GEN-CAMARO...-Aluminum.html __________________ '16 Corvette C7 Z51 1LT (Build Thread) '14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD