Quote:
Originally Posted by Chuckem12
I just went through this process two days ago on a 15 camaro ss..... I used race ramps for this one though. With the race ramps and weight on wheels you'll have to disconnect the steering shaft....its actually pretty easy as all it takes is a 11mm wrench or crows foot. Its a tight spot so it may be a bit of work but its a simple process.... remove bolt and pull the shaft/link up towards the steering wheel. Reconnect is pull down and onto the steering actuator and install bolt.
A couple months ago I did the same process on a '10 SS but used a lift.... it seemed to give a bit more space (don't ask why because I honestly don't know). Either way, its an easy task but if you have bigger hands it'll be a bit of work.
|
Hmmm I did mine on race ramps also and didn't disconnect
Ryan B.