Installing ss brembos on v6? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ironheadspearo · 12-08-2010, 09:59 AM

is this an easy conversion? and what all parts will i need? I found a set of take off brembos from an SS and was wondering if they would bolt onto my car and what else i might need

garcmol · 12-08-2010, 12:22 PM

Yes you can, however the dust shield needs trimmed and the line in the attached picture must be changed. You need the entire set up (rotors, calipers and pads and the brake line in the picture). There are several threads about this swap, I just don't have them bookmarked.

christianmotox · 12-08-2010, 12:26 PM

All of the parts are direct replacements, but you do need to replace the calipers/Pads, the rotors, the brake lines and dust shields. (or Cut them)

BaylorCamaro · 12-08-2010, 12:40 PM

Quote:

Originally Posted by christianmotox

All of the parts are direct replacements, but you do need to replace the calipers/Pads, the rotors, the brake lines and dust shields. (or Cut them)

It isn't too hard to do this. Great upgrade too!

Ironheadspearo · 12-08-2010, 01:15 PM

I found a pair for 500 bucks, just need to see if i can find a second pair somewhere.

nak3dsnake · 12-09-2010, 02:24 PM

You only need to trim the rear dust shields, the fronts are the same.

christianmotox · 12-09-2010, 02:36 PM

Quote:

Originally Posted by Ironheadspearo

I found a pair for 500 bucks, just need to see if i can find a second pair somewhere.

You can find them on ebay for 350 for the fronts. and a full set for like $750.

http://cgi.ebay.com/ebaymotors/2010-...Q5fAccessories

12-08-2010, 09:59 AM	#1
Ironheadspearo ride the pain train Drives: 2011 1LT RS, 1998 fxstc HD Join Date: Jun 2010 Location: Daytona Beach Posts: 2,047	Installing ss brembos on v6? is this an easy conversion? and what all parts will i need? I found a set of take off brembos from an SS and was wondering if they would bolt onto my car and what else i might need __________________ PAIN is temporary, PRIDE is forever......RACE HARD

12-08-2010, 12:22 PM	#2
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,198	Yes you can, however the dust shield needs trimmed and the line in the attached picture must be changed. You need the entire set up (rotors, calipers and pads and the brake line in the picture). There are several threads about this swap, I just don't have them bookmarked. __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John) Last edited by garcmol; 12-13-2010 at 10:46 AM.

12-08-2010, 01:15 PM	#5
Ironheadspearo ride the pain train Drives: 2011 1LT RS, 1998 fxstc HD Join Date: Jun 2010 Location: Daytona Beach Posts: 2,047	I found a pair for 500 bucks, just need to see if i can find a second pair somewhere. __________________ PAIN is temporary, PRIDE is forever......RACE HARD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 07:53 PM
rear SS brembos and rotors with pads take off 500 miles like brand new	playadam	Suspension / Chassis / Brakes	2	07-24-2010 05:46 PM
GIBSON EXHAUST Now Has Cat-Back & Axle-Back kits for 2010 Camaro SS and V6!!	Mayhem Matt	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	16	06-23-2010 01:36 PM
Will a V6 bumper fit a SS??	Maro99	Cosmetics and Lighting Modification Discussions	14	01-29-2010 10:07 PM
Got rid of the V6, where to find an SS?	211269	5th Gen Camaro SS LS LT General Discussions	86	09-10-2009 01:49 PM

12-08-2010, 12:26 PM	#3
christianmotox Drives: ( . )( . ) Join Date: Feb 2010 Location: San Diego, CA Posts: 2,827	All of the parts are direct replacements, but you do need to replace the calipers/Pads, the rotors, the brake lines and dust shields. (or Cut them)

12-09-2010, 02:24 PM	#6
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,282 View My Garage	You only need to trim the rear dust shields, the fronts are the same.