GIBSON EXHAUST Now Has Cat-Back & Axle-Back kits for 2010 Camaro SS and V6!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mayhem Matt · 06-09-2010, 07:40 PM

I just wanted to spread the word to the Camaro5.com Family that Gibson Performance Exhaust has built some amazing kits for the 2010 Camaro SS and V6 Models. I have the Full Cat-Back system on my 2010 Camaro and it sounds and performs AWESOME! I Gained about 15hp to the wheels with just the Cat-back system!! It offers a nice deep tone at idle and produces a very aggressive scream all the way through your RPM range that will break peoples neck from them trying to see whats passing by! They Offer the kit in a Galvanized or Stainless Steel, Axle-Back or Full Cat-Back system.

Here is the link to check out more information on the kit and also the link to purchase it as well.
http://www.gibsonexhaust.com/newprod...010camaro.html

This is a little information about the Gibson Family....
http://www.gibsonexhaust.com/aboutus.html

A link to a sound clip of the kit bolted on a SS....
(I hope to post a couple different videos of my car at Idle, take-off, drive-by, and slow down asap!)

lakers171 · 06-09-2010, 07:44 PM

Cool man hopefully we can have some sound clips of the v6 Version

Mayhem Matt · 06-09-2010, 07:46 PM

**This is their contact info too for all you that want to ask questions about the kit!**

E-MAIL FOR SALES
GIbsonperformance1@gibsonperformance.com

GIBSON PERFORMANCE EXHAUST
1270 Webb Circle
Corona, CA 92879

TEL: 951.372.1220
Toll Free: 800.528.3044

FAX: 951.372.1236 Sales
FAX:951.372.1233 Orders

Mayhem Matt · 06-09-2010, 07:49 PM

I will Also try to get Gibson to post up Dyno-graphs ASAP!!!

ROD1 · 06-09-2010, 08:59 PM

This guy has a gibson v6 prototype dynoed (see post #19 http://www.camaro5.com/forums/showth...ghlight=gibson)

KMPrenger · 06-09-2010, 10:06 PM

Sweet...I see they offer two axle back kits for the V6, not a bad price either. Hopefully have some clips soon!

Dyno sheet above looks a bit misleading. Looks like a huge gain, but after the install its really only making 'normal' power. I saw in the other thread the guy thought the original run was a little low or something.

EDIT: I contacted them for any V6 exhaust clips they might have.

SDCamaro10 · 06-09-2010, 11:02 PM

interested in this as well. i was actually looking at the gibson's 2 nights ago, have yet to find any clips for the V6.

Edge.128 · 06-09-2010, 11:22 PM

Quote:

Originally Posted by ROD1

This guy has a gibson v6 prototype dynoed (see post #19 http://www.camaro5.com/forums/showth...ghlight=gibson)

"stock" power looks way low.... something doesn't seem right with this chart.

lakers171 · 06-10-2010, 12:29 AM

it could be the dyno they are using but still the gains are nice.

rhd · 06-10-2010, 02:00 AM

id like to hear it on a v6 the price isnt bad at all so even if it doesnt make the power they say as long as it sounds good

ROD1 · 06-10-2010, 07:44 AM

Quote:

Originally Posted by Edge.128

"stock" power looks way low.... something doesn't seem right with this chart.

Yeah , stock pull is to low and mod pull seems to high.

supaman · 06-10-2010, 08:50 AM

So are those the regular sell prices or the C5 prices? Would sure like to know if there are any C5 introductory specials *hint hint*

BLACK10 · 06-10-2010, 05:17 PM

sounds good, anyone have more exhaust clips?

KMPrenger · 06-11-2010, 04:10 PM

Oh, by the way...

They did reply to my email inquiring about any V6 sound clips. They said they didn't have any (which annoys the crap outta me...why in today's internet age would you not take a good sound clip of your product!!??...anyways..end rant), BUT they said they tried to make it as V8 like as possible.

So there you have it.

06-09-2010, 07:44 PM	#2
lakers171 SoCal MAYHEM Drives: 2010 2LT/RS IBM Join Date: Feb 2009 Location: Hawthorne, Ca Posts: 2,831 View My Garage	Cool man hopefully we can have some sound clips of the v6 Version __________________

06-09-2010, 07:46 PM	#3
Mayhem Matt Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009 Location: Orange CA Posts: 607 View My Garage	This is their contact info too for all you that want to ask questions about the kit! E-MAIL FOR SALES GIbsonperformance1@gibsonperformance.com GIBSON PERFORMANCE EXHAUST 1270 Webb Circle Corona, CA 92879 TEL: 951.372.1220 Toll Free: 800.528.3044 FAX: 951.372.1236 Sales FAX:951.372.1233 Orders __________________ Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423 My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc

06-09-2010, 07:49 PM	#4
Mayhem Matt Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009 Location: Orange CA Posts: 607 View My Garage	I will Also try to get Gibson to post up Dyno-graphs ASAP!!! __________________ Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423 My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc

06-09-2010, 08:59 PM	#5
ROD1 Retired Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09 Join Date: Aug 2009 Location: Ithaca NY Posts: 2,563	This guy has a gibson v6 prototype dynoed (see post #19 http://www.camaro5.com/forums/showth...ghlight=gibson) Attached Images

06-09-2010, 10:06 PM	#6
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,969	Sweet...I see they offer two axle back kits for the V6, not a bad price either. Hopefully have some clips soon! Dyno sheet above looks a bit misleading. Looks like a huge gain, but after the install its really only making 'normal' power. I saw in the other thread the guy thought the original run was a little low or something. EDIT: I contacted them for any V6 exhaust clips they might have. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

06-09-2010, 07:40 PM	#1
Mayhem Matt Drives: 10' 2SS/RS M6 SUPERCHRGED BUMBLEBEE Join Date: Jun 2009 Location: Orange CA Posts: 607 View My Garage	GIBSON EXHAUST Now Has Cat-Back & Axle-Back kits for 2010 Camaro SS and V6!! I just wanted to spread the word to the Camaro5.com Family that Gibson Performance Exhaust has built some amazing kits for the 2010 Camaro SS and V6 Models. I have the Full Cat-Back system on my 2010 Camaro and it sounds and performs AWESOME! I Gained about 15hp to the wheels with just the Cat-back system!! It offers a nice deep tone at idle and produces a very aggressive scream all the way through your RPM range that will break peoples neck from them trying to see whats passing by! They Offer the kit in a Galvanized or Stainless Steel, Axle-Back or Full Cat-Back system. Here is the link to check out more information on the kit and also the link to purchase it as well. http://www.gibsonexhaust.com/newprod...010camaro.html This is a little information about the Gibson Family.... http://www.gibsonexhaust.com/aboutus.html A link to a sound clip of the kit bolted on a SS.... (I hope to post a couple different videos of my car at Idle, take-off, drive-by, and slow down asap!) Attached Images __________________ Ordered Bumblebee 10/15/2008Part of the Family 6/11/2009 #11423 My Bumblebee to Superbee build story...http://www.camaro5.com/forums/showthread.php?t=105163 Superbee's 536hp Dyno Run...http://www.youtube.com/watch?v=AE7wePluPAc

06-09-2010, 11:02 PM	#7
SDCamaro10 Drives: 2010 Camaro 1LT RJT Join Date: Feb 2010 Location: San Diego, CA Posts: 1,951	interested in this as well. i was actually looking at the gibson's 2 nights ago, have yet to find any clips for the V6. __________________

06-10-2010, 12:29 AM	#9
lakers171 SoCal MAYHEM Drives: 2010 2LT/RS IBM Join Date: Feb 2009 Location: Hawthorne, Ca Posts: 2,831 View My Garage	it could be the dyno they are using but still the gains are nice. __________________

06-10-2010, 02:00 AM	#10
rhd dirtbag Drives: 2010 camaro LS Join Date: Mar 2010 Location: Addison TX Posts: 1,037	id like to hear it on a v6 the price isnt bad at all so even if it doesnt make the power they say as long as it sounds good

06-10-2010, 08:50 AM	#12
supaman Drives: CGM w/IOM rally 2LT/RS Join Date: Dec 2009 Location: Bedford, TX Posts: 191 View My Garage	So are those the regular sell prices or the C5 prices? Would sure like to know if there are any C5 introductory specials hint hint

06-10-2010, 05:17 PM	#13
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	sounds good, anyone have more exhaust clips?

06-11-2010, 04:10 PM	#14
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,969	Oh, by the way... They did reply to my email inquiring about any V6 sound clips. They said they didn't have any (which annoys the crap outta me...why in today's internet age would you not take a good sound clip of your product!!??...anyways..end rant), BUT they said they tried to make it as V8 like as possible. So there you have it. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 08:02 AM
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	612	09-06-2024 08:00 AM
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
Camaro SS Axle Back Exhaust from MRT Performance	Blueclyde	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	29	07-07-2010 03:44 PM
Over 230 Satisfied 2010 Camaro Customers! Paddock Chevrolet has 40 in stock NOW	camarojoe	Dealer Camaros for Sale	2	05-24-2010 05:58 PM