20x10 at all 4 corners? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

blackTT600 · 07-22-2011, 01:13 AM

so i looking to get new wheels tomorrow. love the TSW nurburgring, but I just wanna know has anyone done 20x10 all around? Im thinking for tires continental 275/40/20 all around. and when I get my turbos, 305/35/20 maybe a 315? in back

stros · 08-06-2011, 11:15 AM

interested to know if anyone has tried this as well

bob vogel · 08-06-2011, 11:22 AM

a lot of people have done this. it works very well. you will be happy until ....you get your tubro. you'll need a sticky tire out back. but for the street your in good shape.

stros · 08-06-2011, 11:58 AM

thanks Bob. Are you certain the TSW 20x10 would fit the front though? That offset would be ok?

2010_5thgen · 08-06-2011, 12:38 PM

i would go with a 295 if you want to run a 10" wide. maybe 285. check with the tire mfgr you plan on running. they will have the correct rim width, depending on the tire you want to run.
you dont need a 10" wide to run a 275. you could run a 9.5 and be perfect for a 275.

ipimpthisc · 08-06-2011, 01:34 PM

a 9.0 or 9.5 will do...i think whatever the stock rear is. is about the widest u can run in front unless u go coilover or do susp mods...i think pedders has a kit for this.

2010_5thgen · 08-06-2011, 01:38 PM

you can go wider than a 9.0 or 9.5. i was going to run 19x10... ive even seen 20x10 up front. pedders is running a 19x10.5. so you can really run anything up to a 10.5 if the offest is right. but its not needed in his case. if you only want to run a 275....9.5 will be fine.

NinoSS · 08-06-2011, 01:39 PM

My current set up...

http://www.camaro5.com/forums/showth...ht=niche+sport

bob vogel · 08-06-2011, 01:44 PM

Quote:

Originally Posted by stros

thanks Bob. Are you certain the TSW 20x10 would fit the front though? That offset would be ok?

yes. but you have to do something with yours tires for this to work right. you can run with your stock rears if you wanted to. you can also run with all 4 tires the same size. try running the rears to the fronts and the fronts to the rears, drive the car and see what you think. its just a test.

Berean · 08-06-2011, 10:14 PM

I have 20x10's and 275's on all four.

ipimpthisc · 08-06-2011, 11:10 PM

Quote:

Originally Posted by Berean

I have 20x10's and 275's on all four.

So u are on all 4's...no bueno..j/k

stros · 08-07-2011, 12:37 PM

Quote:

Originally Posted by Berean

I have 20x10's and 275's on all four.

Got any pics?

Speed Depot · 08-07-2011, 04:34 PM

Quote:

Originally Posted by blackTT600

so i looking to get new wheels tomorrow. love the TSW nurburgring, but I just wanna know has anyone done 20x10 all around? Im thinking for tires continental 275/40/20 all around. and when I get my turbos, 305/35/20 maybe a 315? in back

You can run (4) 20x10 TSW Nurburgring wheels with a +35 offset.

07-22-2011, 01:13 AM	#1
blackTT600 Drives: 2011 2LT M6 SC Join Date: Jan 2011 Location: South Florida Posts: 921 View My Garage	20x10 at all 4 corners? so i looking to get new wheels tomorrow. love the TSW nurburgring, but I just wanna know has anyone done 20x10 all around? Im thinking for tires continental 275/40/20 all around. and when I get my turbos, 305/35/20 maybe a 315? in back

08-06-2011, 12:38 PM	#5
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	i would go with a 295 if you want to run a 10" wide. maybe 285. check with the tire mfgr you plan on running. they will have the correct rim width, depending on the tire you want to run. you dont need a 10" wide to run a 275. you could run a 9.5 and be perfect for a 275. __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

08-06-2011, 01:38 PM	#7
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	you can go wider than a 9.0 or 9.5. i was going to run 19x10... ive even seen 20x10 up front. pedders is running a 19x10.5. so you can really run anything up to a 10.5 if the offest is right. but its not needed in his case. if you only want to run a 275....9.5 will be fine. __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

08-06-2011, 01:39 PM	#8
NinoSS Drives: 2SS/RS CGM LS3 Join Date: Aug 2009 Location: NJ Posts: 1,623	My current set up... http://www.camaro5.com/forums/showth...ht=niche+sport __________________ Current - 2018 NGM 1LE (LT4 conversion coming soon) SOLD 2010 LS3 / Vengeance stage I cam / CAI intake w/ADM race scoop / Dynatech LT's / Eaton Posi LPE-JRE 3.91's / L99 Corsa / ZL1 wheels / NT05 275/315

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 10:45 PM
>>> 20x8.5, 20x10 MHT GAME CHROME- SIMILAR TO STOCK - Starting @ $1276 SHIPPED!	BestWheelDeals	Wheels / Tires	22	05-31-2011 02:12 PM
>>> TIS M18 MATTE BLK 20X8.5, 20X10 W/TIRES FROM $1795... PERFECT FOR CUSTOMIZING!	BestWheelDeals	Wheels / Tires	11	02-22-2011 07:36 PM
20x10 on all 4 corners	Smoky10	Wheels and Tires Talk Sponsored by The Tire Rack	2	02-13-2011 10:18 AM
Paint peeling at corners of bumpers	FirstCamaro2k10	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	26	06-22-2010 05:26 PM

08-06-2011, 11:15 AM	#2
stros Drives: 2010 Camaro 2SS/RS Join Date: Oct 2009 Location: San Jose California Posts: 233	interested to know if anyone has tried this as well

08-06-2011, 11:22 AM	#3
bob vogel Drives: 2010 rs ss Join Date: Jan 2010 Location: calif Posts: 796	a lot of people have done this. it works very well. you will be happy until ....you get your tubro. you'll need a sticky tire out back. but for the street your in good shape.

08-06-2011, 11:58 AM	#4
stros Drives: 2010 Camaro 2SS/RS Join Date: Oct 2009 Location: San Jose California Posts: 233	thanks Bob. Are you certain the TSW 20x10 would fit the front though? That offset would be ok?

08-06-2011, 01:34 PM	#6
ipimpthisc Banned Drives: @twinturbo, cammed, intrcooled@ Join Date: Apr 2009 Location: nyc, EAST COAST HEAVY HITTERS Posts: 739	a 9.0 or 9.5 will do...i think whatever the stock rear is. is about the widest u can run in front unless u go coilover or do susp mods...i think pedders has a kit for this.

08-06-2011, 10:14 PM	#10
Berean Drives: Truck Join Date: Apr 2010 Location: Home Posts: 2,439	I have 20x10's and 275's on all four.