![]() |
|
|
#1 |
![]() ![]() ![]() |
whipple injectors help
I'm buying a whipple and need help on injectors size. I know they come with upgraded 63lbs, but if I put a cam in later will I need bigger injectors. I heard the duty cycle of the injectors is what they change depending what the motors needs. So going bigger now without a cam is ok due because they will just back off on the duty cycles. So what size do you think would be best. 85lb injectors? best brand? I will be in the 575hp to 700hp horsepower range. I've read of brand names F.A.S.T and ID what is better and why? thanks guys you alway pull thru for me.
|
|
|
|
|
|
#2 | |
![]() Drives: 2010 Camaro SS/RS Join Date: Aug 2011
Location: USA
Posts: 328
|
Quote:
|
|
|
|
|
|
|
#3 |
![]() ![]() ![]() |
buyer
|
|
|
|
|
|
#4 |
![]() |
DO NOT USE FAST INJECTORS
__________________
85 Buick TType - 5.3l GT4202r 10.86 at 126
|
|
|
|
|
|
#5 |
|
Drives: 2010 SS/RS 2009 CG Z06 Join Date: Nov 2009
Location: Dallas Tx
Posts: 122
|
We stock ID850s
![]() Currently have 4 cars in the shop with them, and wouldnt use anything else. |
|
|
|
|
|
#6 |
![]() ![]() ![]() |
|
|
|
|
|
|
#7 | |
![]() ![]() |
Quote:
|
|
|
|
|
|
|
#8 |
![]() ![]() ![]() |
forget the boost pump then? and go with a lpe or adm? thanks for you help I'm narrowing it down.
|
|
|
|
|
|
#9 |
|
Drives: 2010 SS/RS 2009 CG Z06 Join Date: Nov 2009
Location: Dallas Tx
Posts: 122
|
BAPs are troublesome, and a bandaid. I would run the LPE twin if it were a build we were doing.
|
|
|
|
|
|
#10 | |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,400
|
Quote:
For over 600 RWHP with Our Blower Cam, I take out the MSD and replace it with an LPE dual Fuel Pump System and a Smaller Pulley and a Different Tune. This whole system is backed by our Stellar Customer Service. Ted.
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
#11 | |
![]() ![]() ![]() |
Quote:
|
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Whipple Superchargers from the Largest Volume Install shop in The USA - TORQ! | Erik@Torq | Forced Induction | 25 | 08-07-2012 04:01 PM |
| Whipple Superchargers from the Largest Volume Install shop in The USA - TORQ! | Erik@Torq | Forced Induction - V8 | 27 | 10-24-2011 10:34 AM |
| Vengeance Racing Whipple S/C Packages!!!!! Check these out!!!! | Kevin@V | Forced Induction | 10 | 09-09-2011 03:42 PM |
| Will EV14 LS3/9 injectors work with the whipple. | jasycz28 | Forced Induction - V8 | 6 | 06-16-2011 06:42 AM |
| Whipple Superchargers In The House!!! | HP Addicts | Forced Induction - V8 | 1 | 04-27-2011 09:26 PM |