You are browsing camaro5 
 |
|
12-04-2014, 11:32 PM
|
#1 |
|
Head Ford Harasser
Drives: '10 IOM 2SS/RS LS3 Join Date: Jul 2013
Location: Fair Oaks, Ca
Posts: 202
|
Front Bumper Problem
So I followed a video on taking off my front bumper to do a bulb swap. Came off without a problem, and I thought it went back on without a problem, however, when I closed the hood I noticed it is flush/level with the bumper on the outer edges inward towards the center from both sides but the very middle section of the bumper in front of the cowl on the hod sits about 1/8 to 3/16" above the hood. Any idea what I did wrong? Seems like the plastic is bound up at the center where the push pins are- perhaps I need to break everything loose and re-tighten outward from center. Anyone else have an issue when doing this swap? Is there maybe a lip that I don't have it laying over?
Thanks for any advice... |
|
|
|
12-05-2014, 08:18 AM
|
#2 |
 
Drives: Summit White RS Join Date: Feb 2012
Location: IL
Posts: 240
|
|
|
|
|
|
12-05-2014, 08:19 AM
|
#3 |
|
Drives: Summit White RS Join Date: Feb 2012
Location: IL
Posts: 240
|
|
|
|
|
|
12-05-2014, 10:45 AM
|
#4 | |
|
Head Ford Harasser
Drives: '10 IOM 2SS/RS LS3 Join Date: Jul 2013
Location: Fair Oaks, Ca
Posts: 202
|
Quote:
Dave |
|
|
|
|
|
|
|
|
 |
|
|
