07-27-2015, 12:33 PM | #1 |
Drives: 2014 SS/RS Blue Ray Join Date: Mar 2015
Location: Long Island, NY
Posts: 67
|
Small Cutout in Front Grille -- what is this?
Noticed this small section that looks to be cut out in the front grille. What is this for? Can the cover be removed? If so, could this be a good place to mount a front-facing camera?
__________________
2014 1SS/RS L99 Blue Ray Metallic
Patrick G Tune | K&N High Flow | SOLO Axle Back w/ J-Pipes | JEGS X-Pipe Resonator Delete |
07-27-2015, 12:36 PM | #2 |
Drives: 2014 Blk 2SS/1LE Join Date: Jul 2013
Location: NJ
Posts: 340
|
For a tow-hook
|
07-27-2015, 12:55 PM | #3 |
Drives: 2015 2SS Red Hot Adrenaline Join Date: Apr 2014
Location: Virginia
Posts: 457
|
Cool, I noticed that as well and was curious. That makes sense. I guess the hook is behind there?
__________________
2015 2SS Red Hot Adrenaline |
07-27-2015, 12:58 PM | #4 |
Drives: 05 GTO Join Date: May 2015
Location: Weatherford, Texas
Posts: 390
|
No hook behind there. It's the location to add one.
|
07-27-2015, 01:05 PM | #5 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
I think it was added so you didn't have to take the hole bumper off to add the tow hook.
__________________
|
07-27-2015, 03:18 PM | #6 |
Music City Camaro Club
Drives: 2014 2SS/RS Spring Special Edition Join Date: May 2014
Location: Christiana, TN
Posts: 642
|
You install a tow hook receiver behind it, in the sub bumper and then if you are on a track or tan of the road into a ditch and need a tow; you open it, install the tow hook and then the truck hooks up to it to pull you out of whatever you are stuck in or w/e. Just installed mine the other day. Here is a picture with the door open and hook installed.
__________________
EMC(SS) USN RET. 2014 2SS Spring Special Edition,1 of 293. Cold Air Inc. CAI,Apex Catch Can, Kooks 1-7/8" headers, Kooks HF Cats, X-pipe, Kooks mufflers,Graphite, BMR Toe links, BMR rear trailing arms, MRR228s,RGB ORACLE Colorshift Halos, RGB LED Engine bay and Grille lighting, Diode Dynamics RGB Fog Lights. NightOwl LED control system. Painted engine cover by S.L. Customs. River Cities Creations painted strut brace. My Build Thread
|
07-27-2015, 08:09 PM | #7 |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,338
|
European requirement, great for us too. Wish it were on the earlier models.
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
07-27-2015, 08:56 PM | #8 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
All you have to do is take the front fascia off & install one on the earlier models.
__________________
|
07-28-2015, 08:55 PM | #9 |
Drives: 2014 SS/RS Blue Ray Join Date: Mar 2015
Location: Long Island, NY
Posts: 67
|
Appreciate the info!! Is there a flat "floor" behind the door? Tried to draw what I mean.
I don't plan on installing a toe-hook and wonder if it might be a good mounting place for a front camera. Tried looking at some peoples install threads for the toe-hooks but can't get a good look behind the door.
__________________
2014 1SS/RS L99 Blue Ray Metallic
Patrick G Tune | K&N High Flow | SOLO Axle Back w/ J-Pipes | JEGS X-Pipe Resonator Delete |
07-28-2015, 09:27 PM | #10 |
Drives: '11 SS M6, '14 SS 1LE, '17 SS 1LE Join Date: Apr 2011
Location: East TX
Posts: 533
|
Should just be the vertical surface of the front bumper bar. We didn't get the threaded connection for a tow hook either.
__________________
Anyone can drive fast in a straight line, its what you can do thru the curves that matters!
'11 CGM SS M6 ordered in 3/11, '14 BRM SS 1LE from stock in 10/13 & '17 HBM SS 1LE in 11/16 - all from BeckyD!! |
07-28-2015, 10:19 PM | #11 |
Music City Camaro Club
Drives: 2014 2SS/RS Spring Special Edition Join Date: May 2014
Location: Christiana, TN
Posts: 642
|
Yes, it is just the flat sub bumper. Just open the door and look. It pops right open and then you can put it right back in. It even has a lanyard attached to it so it doesn't fall off.
__________________
EMC(SS) USN RET. 2014 2SS Spring Special Edition,1 of 293. Cold Air Inc. CAI,Apex Catch Can, Kooks 1-7/8" headers, Kooks HF Cats, X-pipe, Kooks mufflers,Graphite, BMR Toe links, BMR rear trailing arms, MRR228s,RGB ORACLE Colorshift Halos, RGB LED Engine bay and Grille lighting, Diode Dynamics RGB Fog Lights. NightOwl LED control system. Painted engine cover by S.L. Customs. River Cities Creations painted strut brace. My Build Thread
|
07-29-2015, 06:47 AM | #12 |
Drives: 2015 zl1 Join Date: May 2015
Location: Cincinnati
Posts: 308
|
Everyone has told you wrong! It's were the 50 cal. comes out with the "James Bond " package .......shhhhhhhh
|
07-29-2015, 06:56 AM | #13 |
|
|
07-29-2015, 11:17 AM | #14 |
I run 2 catch cans...
|
Mount your front camera to the bottom of your license plate holder. Pics in my mod thread below.
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
|
|
|
|