2 step users? MSD or Lingenfelter? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Turbo99 · 04-10-2011, 07:27 AM

Wanting to get a 2 step, was wanting some feed back on MSD and Lingenfelter. The Lingenfelter has the torque cut on it that you ca n use for a 2nd stage for the shifts to make it a less harsh shift and keep on the throttle.
Would like some users to give me some reviews.

Supercharged SS · 04-10-2011, 07:59 AM

Quote:

Originally Posted by Turbo99

Wanting to get a 2 step, was wanting some feed back on MSD and Lingenfelter. The Lingenfelter has the torque cut on it that you ca n use for a 2nd stage for the shifts to make it a less harsh shift and keep on the throttle.
Would like some users to give me some reviews.

I've seen the MSD one used a bunch of times. It worked flawless. The install was simple too. Bigdog on here has had one for a year.

Turbo99 · 04-10-2011, 05:09 PM

Is it only for launch control? I think it is, I wish their was some feedback on the Lingenfelter 2 stage one, the thought of less harsh shifts is great.

Supercharged SS · 04-10-2011, 05:45 PM

Quote:

Originally Posted by Turbo99

Is it only for launch control? I think it is, I wish their was some feedback on the Lingenfelter 2 stage one, the thought of less harsh shifts is great.

I think the MSD is only for launch control.

Merc · 04-10-2011, 06:18 PM

Quote:

Originally Posted by Supercharged SS

I've seen the MSD one used a bunch of times. It worked flawless. The install was simple too. Bigdog on here has had one for a year.

I have yet to see anybody post how they mounted the micro switch on the clutch pedal assembly.

I have an MSD 2 step, but have not used yet, due not getting around to mounting micro switch.

Turbo99 · 04-10-2011, 08:29 PM

Quote:

Originally Posted by mercuryman96

I have yet to see anybody post how they mounted the micro switch on the clutch pedal assembly.

I have an MSD 2 step, but have not used yet, due not getting around to mounting micro switch.

I don't think that part will be too hard, but I wouldn't mind see some pictures.

Turbo99 · 04-10-2011, 08:32 PM

I would think if you triggered the MSD off the clutch with a microswitch it would also work as a shift torque cut as it would activate when you pushed it the clutch and deactivate when released.

Merc · 04-10-2011, 09:29 PM

Was going to try to complete 2 step installation prior to C5F II, but could not get it done. I believe taking out the drivers seat would give you half a chance at getting under dash to mount micro switch.

Slowhawk · 04-10-2011, 09:49 PM

We use the LPE one. For a manual we hook it off the clutch peddle and a micro switch to indicated 1st gear. Works perfect.
For Auto'a we just use a momentary switch.Ussually with a transbrake.

Supercharged SS · 04-10-2011, 10:37 PM

For you guys wanting pictures about the MSD. I know Ted has done at least two, And those are just the ones I've witnessed in person. He could tell you in one second how they did it. From what I remember it was 1,2,3 and done. Pretty simple.

Capthowdy · 04-10-2011, 10:40 PM

Torq pef has one on their site....not sure of the brand...looks like a new type...its the n2mb racing...no lift shift and 2 step....

boostedyards86 · 04-10-2011, 10:44 PM

i just use the two step feature on the LPE one. Works great for me. Haven't set it up to do the shifting thing though. Dunno if i want to either.

04-10-2011, 07:27 AM	#1
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	2 step users? MSD or Lingenfelter? Wanting to get a 2 step, was wanting some feed back on MSD and Lingenfelter. The Lingenfelter has the torque cut on it that you ca n use for a 2nd stage for the shifts to make it a less harsh shift and keep on the throttle. Would like some users to give me some reviews. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

04-10-2011, 05:09 PM	#3
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Is it only for launch control? I think it is, I wish their was some feedback on the Lingenfelter 2 stage one, the thought of less harsh shifts is great. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

04-10-2011, 08:32 PM	#7
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	I would think if you triggered the MSD off the clutch with a microswitch it would also work as a shift torque cut as it would activate when you pushed it the clutch and deactivate when released. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

04-10-2011, 09:29 PM	#8
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Was going to try to complete 2 step installation prior to C5F II, but could not get it done. I believe taking out the drivers seat would give you half a chance at getting under dash to mount micro switch. __________________ My Build Thread

04-10-2011, 10:40 PM	#11
Capthowdy Drives: 2010 2SS RS IOM Join Date: Jun 2010 Location: Fort Lauderdale Fl Posts: 1,048	Torq pef has one on their site....not sure of the brand...looks like a new type...its the n2mb racing...no lift shift and 2 step.... __________________ THE "MENACE"

04-10-2011, 09:49 PM	#9
Slowhawk Drives: 1999 Trans Am Join Date: Jul 2009 Location: Bridgewater,Ma Posts: 2,018	We use the LPE one. For a manual we hook it off the clutch peddle and a micro switch to indicated 1st gear. Works perfect. For Auto'a we just use a momentary switch.Ussually with a transbrake.

04-10-2011, 10:37 PM	#10
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,926	For you guys wanting pictures about the MSD. I know Ted has done at least two, And those are just the ones I've witnessed in person. He could tell you in one second how they did it. From what I remember it was 1,2,3 and done. Pretty simple.

04-10-2011, 10:44 PM	#12
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 611 View My Garage	i just use the two step feature on the LPE one. Works great for me. Haven't set it up to do the shifting thing though. Dunno if i want to either. __________________ 85 Buick TType - 5.3l GT4202r 10.86 at 126

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter Breaks Deep Into the 9s	paul2010	Dragstrip and Launch Techniques Discussion	95	10-14-2023 11:25 AM
Anybody using a 2 step with CATs? MSD or Lingenfelter?	Turbo99	Tuning / Diagnostics -- engine and transmission	7	04-10-2011 01:07 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
P0300 Misfire Code Help	black-knight	4th Generation Camaros	4	02-08-2010 02:45 PM
Lingenfelter 750hp LS7 Camaro debuts at SEMA	Tran	Camaro Photos \| Spyshots \| Video \| Media Gallery	14	11-07-2009 11:40 PM