01-10-2024, 04:42 PM | #1 |
Drives: 2014 Camaro 2LT RS Join Date: Sep 2023
Location: Knoxville, TN
Posts: 13
|
Elite Engineering catch can cleaning question
I just scored a used Elite Engineering catch can (the one with one inlet and one outlet) on ebay. I assume I need to clean it before installing. How do I clean the filter media or should I just replace it? Thanks.
|
01-10-2024, 04:57 PM | #2 |
Drives: 2011 2SS, 2006 GMC Sierra Join Date: Jul 2019
Location: MA
Posts: 266
|
Its a stainless steel mesh that's in the top of the canister, If your worried about it I would run lacquer thinner through it. I wouldn't worry too much about it unless there's a lot of crud in the base. Mine stays very clean.
|
01-10-2024, 07:05 PM | #3 | |
Drives: 2014 Camaro 2LT RS Join Date: Sep 2023
Location: Knoxville, TN
Posts: 13
|
Quote:
Thanks, I'll check it. The seller said it was only used for 18 months. There were pictures of it taken apart and the base looked clean. |
|
01-10-2024, 08:20 PM | #4 |
Drives: 2010 2LT/RS Join Date: Mar 2015
Location: Palm Coast, FL
Posts: 1,217
|
I'm in need for one as well. I have a 2010 with 99k miles on it and no catch can. Still runs well.. maybe its my luck but don't want to take any chances. Catch cans are surely expensive for just a simple can and hoses. Dang.
__________________
2010 2LT/RS
ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can. |
01-11-2024, 09:55 AM | #5 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Yeah, I've been running one since 2012 when I did the LT install. They have become a popular item, so yep the price of them went up. I have the RX cam custom paint matched, works pretty well..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
01-11-2024, 11:02 AM | #6 |
Drives: 2012 camaro ss Join Date: Sep 2018
Location: Illinois
Posts: 448
|
Just get one off Amazon and make your own hoses, I got one from Evil Energy. With hoses and can have around $50 in it and it works great!
__________________
GPI Powered
|
01-11-2024, 11:54 AM | #7 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,785
|
An Amazon unit will work and I use some Evil Energy stuff, but the Elite unit is quite a bit higher quality. I picked mine up on here for $100. They come up fairly frequently or at least used to.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
01-11-2024, 04:19 PM | #8 | |
Drives: 2014 Camaro 2LT RS Join Date: Sep 2023
Location: Knoxville, TN
Posts: 13
|
Quote:
I must have looked at about a thousand different catch cans. The Elite that I got came up on ebay and the seller wanted 125.00 for it. An hour before the auction ended I offered him 75.00 and he accepted it. Total price with tax and shipping was 93.00. The can looked good in the pictures and it included the hoses, clamps and an extra o-ring. It's even red to match my CRT Camaro. |
|
01-11-2024, 05:00 PM | #9 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
01-11-2024, 05:56 PM | #10 | |
Drives: 2010 2LT/RS Join Date: Mar 2015
Location: Palm Coast, FL
Posts: 1,217
|
Quote:
Good find! Sent from my iPhone using Tapatalk
__________________
2010 2LT/RS
ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can. |
|
01-11-2024, 05:57 PM | #11 | |
Drives: 2010 2LT/RS Join Date: Mar 2015
Location: Palm Coast, FL
Posts: 1,217
|
Elite Engineering catch can cleaning question
Quote:
I can agree with that. They used to and everyone who is selling is asking for more on “used” item. Sent from my iPhone using Tapatalk
__________________
2010 2LT/RS
ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can. |
|
01-11-2024, 08:53 PM | #12 |
Drives: 2012 camaro ss Join Date: Sep 2018
Location: Illinois
Posts: 448
|
Yeah i guess , but i not sure on where the better quality is! This is a nice little can , with a dipstick and it also came with a red anodized breather that i didnt use, I made some black braided hoses and i love how it turned out, and it definitely catches some oil! I guess its all how ya look at things.
__________________
GPI Powered
|
01-12-2024, 05:07 PM | #13 | |
Drives: 2010 2LT/RS Join Date: Mar 2015
Location: Palm Coast, FL
Posts: 1,217
|
Quote:
That looks good! I’m trying to find something that is compatible with my 2010 LLT. It is not listed in the descriptions of the ones I have found. I’ll take a $100 catch can than spend 2-$300 on a “name brand” one that does the same thing. If people stop willing to spend top money on certain items, the cost will come down I believe, otherwise it just gives the vendors the okay to raise the cost on these things because they know people are willing to throw money at it. Sent from my iPhone using Tapatalk
__________________
2010 2LT/RS
ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can. |
|
01-12-2024, 06:51 PM | #14 | |
Drives: 2012 camaro ss Join Date: Sep 2018
Location: Illinois
Posts: 448
|
Quote:
__________________
GPI Powered
|
|
|
|
|
|