You are browsing camaro5 
 |
|
09-11-2012, 08:02 PM
|
#1 |
 Drives: 2010 camaro ss 6 speed manual Join Date: Jul 2011
Location: kentucky
Posts: 16
|
cam and heads..
hey guys,
im looking for a cam and heads for my camaro 2ss. its a 2010 6 speed manual ls3. It has kooks long tubes, high flow cats, and magnaflow catback. It also has a CAI. Im looking for a street cam and heads. I still drive it everyday but im looking for more power. Is it better to just polish and port my own heads? or buy a new set? Also what kind of street cams are most of you running? i do want to be able to drive it everyday but a very little lope wouldn't bother me either. Please let me know what your thoughts are? also what about the stock intake? is it ok? stock throttle body?? Thanks, Chris Prater |
|
|
|
09-11-2012, 08:04 PM
|
#2 |
|
Do you even lift, bro?
Drives: 2013 1LE Camaro Join Date: Aug 2012
Location: Sumter, SC
Posts: 3,159
|
What #'s you putting down right now with current mods?
__________________
My 1LE (645WHP/597WTQ) build/journal Thread:
1st ever 1LE COTW http://www.camaro5.com/forums/showthread.php?t=255461  |
|
|
|
|
09-11-2012, 08:37 PM
|
#3 |
 
Drives: IBM 2SS/RS 6sp. Join Date: Jan 2012
Location: Valdosta Ga
Posts: 541
|
the LS3 heads flow very well and arent worth porting unless u get an extreme cam or go the FI route. im running a Smooth Idle Blower Cam from Janetty Racing very streetable and so is the Rough Idle Cam with your mods you would be looking at about 450 rwhp. A blast on the street and strip. oh the money u would spend on porting the heads wouldnt be worth the power u gained unless u went those other routes i mentioned before. good luck with your decision
__________________
|
|
|
|
|
09-11-2012, 08:50 PM
|
#4 |
 Drives: 2013 blue Join Date: Jul 2012
Location: pa.
Posts: 94
|
GM makes new LS3 heads and some good cams. Any good tuner can help you out, Ever hear of ECS in Cream Ridge NJ
|
|
|
|
|
|
|
|
 |
|
|
