Side exhaust venting - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

parkerss · 10-21-2012, 01:21 PM

Has anyone tried to run the exhaust out the side of the vehicle but in front of the rear tires. Through a side skirt? I've never looked to see if there is room or not. I was thinking out both sides with a dual tip on each side.

2SS45th · 10-21-2012, 01:24 PM

There are kits out there, but there is no real clearance for it. The side skirts would have to be fully custom at this point. SW makes one, as well as Borla.

Denis · 10-21-2012, 02:03 PM

http://www.stainlessworks.net/produc...-exhausts.html

Neumatic · 10-21-2012, 06:46 PM

I have been tempted, I think it would look great if you could get it to come out the side and have a custom rear fascia to get rid of the holes where the exhaust currently comes out(rather then filling the holes).

StephenS_84 · 10-21-2012, 11:54 PM

A guy I know in Indiana has it done. Contact Raymonds Performance they did the work. Looks great BTW...

2SS45th · 10-22-2012, 12:03 AM

Ofer has a solid diffuser for sale, it's at gen5diy.com

Stainless Works · 10-22-2012, 08:43 AM

Stainless Works Offers our Side Burners. They will connect to your factory Exhaust system and give you the side exit sound and look you may be going for!

If you have any questions feel free to let me know.

Thanks, Chris
Chris@Stainlessworks.com
800-878-3635

parkerss · 10-22-2012, 06:07 PM

Gotta love the forum....thanks for all your help!

The 2010 Sin · 10-22-2012, 10:41 PM

Wish these had an actuator and could work on a 3" system. when they're closed they would almost work like dead end pipes maybe reducing drone. lol. but a butterfly and they're open ... YEEHAW!

LIM3 · 10-22-2012, 10:44 PM

I forgot about this mod. FML now I'm going back to the drawing board lol

Stainless Works · 10-23-2012, 07:53 AM

Quote:

Originally Posted by The 2010 Sin

Wish these had an actuator and could work on a 3" system. when they're closed they would almost work like dead end pipes maybe reducing drone. lol. but a butterfly and they're open ... YEEHAW!

Instead of the Side-Burners why not get a set of Electric Cut-outs. Same theory you are looking for??? You would just have to add a turn down pipe after the cutout to extend it to the side of the vehicle.

parkerss · 10-24-2012, 10:26 PM

^^ like a lot

Im calling in the morning !

10-21-2012, 01:21 PM	#1
parkerss Drives: 2011 SS/RS Join Date: Sep 2012 Location: Somewhere very warm :) Posts: 320 View My Garage	Side exhaust venting Has anyone tried to run the exhaust out the side of the vehicle but in front of the rear tires. Through a side skirt? I've never looked to see if there is room or not. I was thinking out both sides with a dual tip on each side. __________________ Speeding is fun, Speeding with friends...PRICELESS! Last edited by parkerss; 10-21-2012 at 03:29 PM.

10-21-2012, 01:24 PM	#2
2SS45th Drives: 11 Seconds or Faster Join Date: May 2012 Location: Arvada, Colorado Posts: 2,797 View My Garage	There are kits out there, but there is no real clearance for it. The side skirts would have to be fully custom at this point. SW makes one, as well as Borla. __________________ I Ain't About That Stock Life.

10-21-2012, 02:03 PM	#3
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	http://www.stainlessworks.net/produc...-exhausts.html __________________

10-22-2012, 12:03 AM	#6
2SS45th Drives: 11 Seconds or Faster Join Date: May 2012 Location: Arvada, Colorado Posts: 2,797 View My Garage	Ofer has a solid diffuser for sale, it's at gen5diy.com __________________ I Ain't About That Stock Life.

10-22-2012, 06:07 PM	#8
parkerss Drives: 2011 SS/RS Join Date: Sep 2012 Location: Somewhere very warm :) Posts: 320 View My Garage	Gotta love the forum....thanks for all your help! __________________ Speeding is fun, Speeding with friends...PRICELESS!

10-21-2012, 06:46 PM	#4
Neumatic Drives: 2010 Camaro 2SS M6 Join Date: Oct 2011 Location: Ohio Posts: 1,448 View My Garage	I have been tempted, I think it would look great if you could get it to come out the side and have a custom rear fascia to get rid of the holes where the exhaust currently comes out(rather then filling the holes).

10-21-2012, 11:54 PM	#5
StephenS_84 Account Suspended Drives: 2011 2SS/RS Join Date: Aug 2012 Location: Ohio Posts: 972	A guy I know in Indiana has it done. Contact Raymonds Performance they did the work. Looks great BTW...

10-22-2012, 10:41 PM	#9
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	Wish these had an actuator and could work on a 3" system. when they're closed they would almost work like dead end pipes maybe reducing drone. lol. but a butterfly and they're open ... YEEHAW! __________________

10-22-2012, 10:44 PM	#10
LIM3 it's mind bottling.. Drives: SGM Join Date: Apr 2011 Location: miami floirda. Posts: 5,392	I forgot about this mod. FML now I'm going back to the drawing board lol __________________

10-24-2012, 10:26 PM	#12
parkerss Drives: 2011 SS/RS Join Date: Sep 2012 Location: Somewhere very warm :) Posts: 320 View My Garage	^^ like a lot Im calling in the morning ! __________________ Speeding is fun, Speeding with friends...PRICELESS! Last edited by parkerss; 10-24-2012 at 10:49 PM.