Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 02-06-2013, 09:40 PM   #1
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
PCM connector pins on ZL1

Anyone have the service manual for the ZL1 and can give me some pin info.

There are 3 connectors on the ZL1 compared to other Camaros having 2, anyone have the PCM pin outs for the ZL1 PCM connectors?

Looking for the VSS Signal wire and the Engine speed signal on the PCM.

Thanks
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/


Last edited by SamHouseIII; 02-06-2013 at 09:57 PM.
SamHouseIII is offline   Reply With Quote
Old 02-06-2013, 09:44 PM   #2
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
2SSRS should be able to help you out.
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 02-07-2013, 06:00 PM   #3
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
Thought I found them, but nope, not them.....
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
Old 02-07-2013, 08:24 PM   #4
One-Bad-ZL1
So easy to love Camaros
 
One-Bad-ZL1's Avatar
 
Drives: 2013 ZL1 VR #3457
Join Date: Feb 2012
Location: Marlborough, CT
Posts: 3,768
Send a message via Yahoo to One-Bad-ZL1
What r u you up to Sam?
__________________
One-Bad-ZL1 is offline   Reply With Quote
Old 02-07-2013, 09:48 PM   #5
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
Shift Light...I thought I had it, but found out I was getting a fuel injector signal, the 13 wiring diagrams are different.

I am for going the Raptor and getting an MSD, much easier to hook up.


http://www.camaro5.com/forums/showthread.php?t=87055
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
Old 02-07-2013, 10:19 PM   #6
crustychev
 
crustychev's Avatar
 
Drives: 2013 ZL1,1972 Dart, 1947 Willys
Join Date: Sep 2012
Location: Ontario Canada
Posts: 84
Hey I think Skylane765 was showcasing a new set of manuals. Maybe he can help you out.
crustychev is offline   Reply With Quote
Old 02-21-2013, 09:33 PM   #7
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
Camaro ZL1 6.2L SC with LSA engine:

-Engine speed signal from PCM (purple wire, pin #1 of X2 , 73 position connector. This is the coil drive signal from the PCM to coil #1. You can also get the signal at the ignition coil (or any of the 8 coils). Connect green wire of shift light here.
If installing the Raptor dual mode shift light, connect the white wire of the shift light to the Vehicle Speed signal from PCM, (pin #39 of X1, 56 position connector, dark green wire with white stripe.
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.