Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions


Reply
 
Thread Tools
Old 03-08-2013, 02:47 PM   #1
Jeff_SS
"Cam Only"
 
Jeff_SS's Avatar
 
Drives: 2013 Camaro SS
Join Date: Nov 2011
Location: Scottsdale, AZ
Posts: 1,769
Wanting to install hash marks on my fenders

I am looking to do something like this

Matte black hash marks. (picture courteous of someone on here from a long time ago so sorry if I'm stealing your picture..)

I just got off the phone with a vinyl shop here in my town and I emailed them that pic and they said it would cost about $110 for the adhesive vinyl and I'd be installing it myself.
Is this reasonable? Or is there some place online I can get this cheaper and install it?
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq
Jeff_SS is offline   Reply With Quote
Old 03-08-2013, 02:53 PM   #2
RoadieWingZ
 
RoadieWingZ's Avatar
 
Drives: 2013 Black Camaro 1LS
Join Date: Dec 2012
Location: Austin, Tx
Posts: 409
Too much.... Almost double what you should pay. Try these guys:

http://www.bigwormgraphix.net/2010ca...arkstripes.htm

I hear they're excellent folks to deal with and help keep this forum moving along.
__________________


2013 Camaro LS
RoadieWingZ is offline   Reply With Quote
Old 03-08-2013, 02:54 PM   #3
darkrider01
Aural Assault Vehicle
 
darkrider01's Avatar
 
Drives: 2010 IBM 2SS/RS, 2015 Sierra Denali
Join Date: Jun 2011
Location: Garner, NC
Posts: 792
http://lmgtfy.com/?q=CAMARO+VINYL+HASH+MARKS

First link is hash marks (in any flavor you want, even matte black) for $55.
__________________
My amplifier pop/click/thump solution thread
Power Mods * K&N Typhoon CAI, Flowmaster American Thunder cat-back exhaust, Hurst Short Throw Shifter Exterior Mods * Black Phantom Grille * 22" T.I.S. 537MS wheels w/ Nitto INVO rubber * OEM body kit Suspension Mods * BC Racing Coilovers * Lakewood Strut Tower Brace Audio Mods * Stinger SPP 2250 Battery * Mosconi 6to8v8 w/ RCD * Pioneer AVH-X7500BT * Scosche Dash Kit * 2 - Mosconi AS200.4 * 2 - JL Audio 13W6v2 * Focal 165KRX2 Power (active) * Mosconi Gladen One 240.2 * Rockford Fosgate Power T1692
darkrider01 is offline   Reply With Quote
Old 03-08-2013, 02:58 PM   #4
Jeff_SS
"Cam Only"
 
Jeff_SS's Avatar
 
Drives: 2013 Camaro SS
Join Date: Nov 2011
Location: Scottsdale, AZ
Posts: 1,769
Quote:
Originally Posted by RoadieWingZ View Post
Too much.... Almost double what you should pay. Try these guys:

http://www.bigwormgraphix.net/2010ca...arkstripes.htm

I hear they're excellent folks to deal with and help keep this forum moving along.
Those are too thin and up too far. But thank you for the quick response.

Quote:
Originally Posted by darkrider01 View Post
http://lmgtfy.com/?q=CAMARO+VINYL+HASH+MARKS

First link is hash marks (in any flavor you want, even matte black) for $55.
Love the sardonic link. Pretty close but those don't wrap into the wheel well, and I don't want them on the hood..
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq
Jeff_SS is offline   Reply With Quote
Old 03-08-2013, 05:59 PM   #5
Aubrey64


 
Aubrey64's Avatar
 
Drives: 2010 Camaro LLT/RS
Join Date: Apr 2012
Location: Plano, TX
Posts: 2,684
Try big worm graphics, they have great prices and great quality. I got my hash marks from them
__________________
Aubrey64 is offline   Reply With Quote
Old 03-08-2013, 08:58 PM   #6
MackMan
Camaro CRAZY
 
MackMan's Avatar
 
Drives: 2019 1SS/1LE
Join Date: Apr 2011
Location: Winchester, KY
Posts: 3,203
Had mine installed at a local vinyl shop for $50. They're trying to rip you off. Mine were $50 for both sides too....

Mine are 4 inches wide, 1 inch between from the hood line to the end of the wheel well opening.
__________________

MACKMAN // 1LE_ORNGE
MackMan is offline   Reply With Quote
Old 03-08-2013, 08:59 PM   #7
CamaroCK
SoCal HT5
 
CamaroCK's Avatar
 
Drives: 2013 VR 2SS/RS
Join Date: May 2010
Location: Northridge, CA
Posts: 344
I have these, love em. $45

http://camarodecalstore.com/EXTERIOR...6.htm?page=all



Also, Mnp customs carries them too I believe
__________________
CamaroCK is offline   Reply With Quote
Old 03-09-2013, 02:01 AM   #8
Jeff_SS
"Cam Only"
 
Jeff_SS's Avatar
 
Drives: 2013 Camaro SS
Join Date: Nov 2011
Location: Scottsdale, AZ
Posts: 1,769
Quote:
Originally Posted by CamaroCK View Post
I have these, love em. $45

http://camarodecalstore.com/EXTERIOR...6.htm?page=all



Also, Mnp customs carries them too I believe
Thank you, these look about as good as I'm gonna find. Will order soon.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq
Jeff_SS is offline   Reply With Quote
Old 03-09-2013, 02:06 AM   #9
Blue17CamaroZL1
650HP soon to come
 
Blue17CamaroZL1's Avatar
 
Drives: 2017 Chevy Camaro ZL1
Join Date: Jul 2011
Location: Sayreville, New Jersey
Posts: 2,882
http://www.autotrimdesign.net/Precut...for_Camaro.asp
__________________
2017 Camaro ZL1
Hyper Blue Metallic
A10, PDR, NAV, Premium floor mats

Blue17CamaroZL1 is offline   Reply With Quote
Old 03-09-2013, 04:44 AM   #10
t&t moyer
It's all hers.
 
t&t moyer's Avatar
 
Drives: 2015 ZL1
Join Date: Jan 2012
Location: Djibouti - Horn of Africa / Wellsville NY
Posts: 719
There's plenty of options out there and considering what GM is asking for the kit from them all of the above mentioned are a steal!
__________________
#846
t&t moyer is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:23 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.