After Market Hurst Shifter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sscamaro · 12-15-2009, 04:42 PM

I installed my new after market Hurst shifter today #391 6030.It has a 44% shorter throw. I couldn't beleive the difference in the throw. The shifter only travels about 2" from first to second. It made the performance of the car all together different. Looks cool with the flat chrome stick and white ball. Only took about 1 1/2 hours to install it. Most of the work is done from the bottom. A must have for the 6 speed manual. Sorry I can't get any pictures right now. After my brother drove it, he is going to get one also. I guess I'll have another one to install.

Michael_Js · 12-15-2009, 04:58 PM

Yup! A great upgrade! I love mine!

linkwpc · 12-15-2009, 05:05 PM

I love mine! They make good stuff

jonnyb · 12-15-2009, 05:11 PM

But I'm sure there are others on this forum

ZED SLED · 12-15-2009, 05:34 PM

Installed 10/3/09
Big Difference. Too bad it's in the garage for the winter. I guess it will still be brand new next spring.

jonnyb · 12-15-2009, 05:41 PM

And the throw is really short mclarck10?
Thanks for the pics

ffrcobra_65 · 12-15-2009, 06:10 PM

congrats.

Yep, throw is very short. Mine even got even smoother/better with miles.

newagemuscle · 12-15-2009, 08:06 PM

How much did it cost? I am looking to get one in spring also. The stock throgh is way to long for me.

hamidar05 · 12-15-2009, 09:54 PM

No rattle at higher RPMs? I have heard different experiences?

I really want the t-handle, but know the nylon bushings aren't particularly awesome from other Hurst shifter.

Fast vette · 12-15-2009, 10:08 PM

They are on special right now at

http://www.latemodelrestoration.com/item/HUR-3916030

And they have a cool white ball without the shift pattern part no. 1631401

ZED SLED · 12-16-2009, 07:56 AM

There is some rattle under load in 2nd and third. It could be worse but I took the advice from the guy on the original thread who used his Camaro to help Hurst in the development. That was to wrap the linkage you could get to with Dynamat. I put some underneath and on top. I'm sure it cut down the vibration quite a bit. If this a concern you can always use the stock ball and upper that comes with the kit. Most things I've read says the vibration is normal with a performance shifter. It doesn't bother me. As for price, I bought mine from TCSpeedCustom out of Stuart, FL. They were to receive the first 100 produced and I believe I was early in that lot. Price was introductory at $359.95, but I think I've seen them as low as $289.95 now.
Enjoy

ZED SLED · 12-16-2009, 08:02 AM

Original thread

Camaro Forum - 2010 Camaro / Camaro Z28 SS Forums - Camaro5.com > Marketplace > Commercial vendor classifieds > Interior Parts & Accessories
Hurst shifter info: ball park pricing etc.

There are some good install tips here.

linkwpc · 12-16-2009, 08:44 AM

Here is my review:

http://www.camaro5.com/forums/showthread.php?t=48035

And here is the install video:

subzero05 · 12-16-2009, 10:35 AM

glad you like it!

12-15-2009, 04:42 PM	#1
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	After Market Hurst Shifter I installed my new after market Hurst shifter today #391 6030.It has a 44% shorter throw. I couldn't beleive the difference in the throw. The shifter only travels about 2" from first to second. It made the performance of the car all together different. Looks cool with the flat chrome stick and white ball. Only took about 1 1/2 hours to install it. Most of the work is done from the bottom. A must have for the 6 speed manual. Sorry I can't get any pictures right now. After my brother drove it, he is going to get one also. I guess I'll have another one to install.

12-15-2009, 04:58 PM	#2
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,298 View My Garage	Yup! A great upgrade! I love mine! __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

12-15-2009, 05:11 PM	#4
jonnyb Drives: IBM 2SS/RS Join Date: Dec 2009 Location: Elko, NV Posts: 392	But I'm sure there are others on this forum __________________ Searching for traction!

12-15-2009, 05:34 PM	#5
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,614 View My Garage	Installed 10/3/09 Big Difference. Too bad it's in the garage for the winter. I guess it will still be brand new next spring. Last edited by ZED SLED; 10-23-2012 at 07:49 AM.

12-15-2009, 05:41 PM	#6
jonnyb Drives: IBM 2SS/RS Join Date: Dec 2009 Location: Elko, NV Posts: 392	And the throw is really short mclarck10? Thanks for the pics __________________ Searching for traction!

12-15-2009, 05:05 PM	#3
linkwpc The punching cat Drives: '10 Camaro SS Black W/Hugger&W/IOI Join Date: Nov 2007 Location: Torrance, CA Posts: 4,048 View My Garage	I love mine! They make good stuff __________________ My car build (COTW 7/23/12) - - - - - - > CLICK HERE! : http://www.camaro5.com/forums/showthread.php?t=80725

12-15-2009, 06:10 PM	#7
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	congrats. Yep, throw is very short. Mine even got even smoother/better with miles.

12-15-2009, 08:06 PM	#8
newagemuscle Philippians 4:13 Drives: SLP Supercharged LS3 Join Date: Aug 2009 Location: The Motor City - Michigan Posts: 2,902 View My Garage	How much did it cost? I am looking to get one in spring also. The stock throgh is way to long for me. __________________

12-15-2009, 09:54 PM	#9
hamidar05 Drives: 10 Camaro/69 Bronco/08 Mazda3 Join Date: Jul 2009 Location: Colorado Posts: 304 View My Garage	No rattle at higher RPMs? I have heard different experiences? I really want the t-handle, but know the nylon bushings aren't particularly awesome from other Hurst shifter. __________________ Selection Worksheet - 04/27/09 3300 - 08/03/09 6000 - 08/25/09 VIN# 34612 Bitchin Camaro - Dead Milkmen - http://www.newgrounds.com/portal/view/8092 Thank You Oshawa - Domo arigato Mr. Roboto ~1600 mi so far - 07/18/10

12-15-2009, 10:08 PM	#10
Fast vette Drives: 2SS IOM M6, 71 ElCamino, 00 Sierra Join Date: Oct 2009 Location: Mont St-Hilaire, Quebec Posts: 58	They are on special right now at http://www.latemodelrestoration.com/item/HUR-3916030 And they have a cool white ball without the shift pattern part no. 1631401

12-16-2009, 07:56 AM	#11
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,614 View My Garage	There is some rattle under load in 2nd and third. It could be worse but I took the advice from the guy on the original thread who used his Camaro to help Hurst in the development. That was to wrap the linkage you could get to with Dynamat. I put some underneath and on top. I'm sure it cut down the vibration quite a bit. If this a concern you can always use the stock ball and upper that comes with the kit. Most things I've read says the vibration is normal with a performance shifter. It doesn't bother me. As for price, I bought mine from TCSpeedCustom out of Stuart, FL. They were to receive the first 100 produced and I believe I was early in that lot. Price was introductory at $359.95, but I think I've seen them as low as $289.95 now. Enjoy

12-16-2009, 08:02 AM	#12
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,614 View My Garage	Original thread Camaro Forum - 2010 Camaro / Camaro Z28 SS Forums - Camaro5.com > Marketplace > Commercial vendor classifieds > Interior Parts & Accessories Hurst shifter info: ball park pricing etc. There are some good install tips here.

12-16-2009, 10:35 AM	#14
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	glad you like it!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Hurst Short Throw Shifter Install - Pix and Video	TAG UR IT	Camaro DIY & HOW-TO instructions & discussions	121	02-26-2015 11:08 AM
TAG's 2010 THRSS #2	TAG UR IT	Member Car Journals	3129	08-14-2014 10:29 AM
Hurst Shifter Review on 2SS	linkwpc	Vendor and Seller review / feedback / experiences	22	06-15-2010 09:27 PM
first Camaro Hurst shifter installed in 2010 Camaro	2SSRS@Gen5diy	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	347	10-17-2009 01:10 PM
Thread Size on Hurst Shifter?	r0cketdr	Cosmetics and Lighting Modification Discussions	0	11-18-2008 02:29 PM