Full LS7 Look Rear Fascia Vinyl Blackout Finally Avail! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DJ ATOMIX · 02-07-2010, 01:50 PM

I just thought I would note to everyone that a full blackout vinyl kit is finally here including those four stripes that wernt orginally covered between the rear tail lights and the original blackout kit. As far as I know, this is the first kit out that covers EVERYTHING.

I will post photos of it here when I get it installed on my new Camaro when my cammy arrives. I know many of you were on the fence before because the rear fascia wasnt completely blacked.

Well now it is

http://www.ridergraphix.com/2010_Cam..._Blackout.html

The photo used on the website is the original kit which I had on my previous 2010 Camaro. To see what I'm talking about, please note the vinyl diagram of the four new pieces avail.

I cant wait to see how this looks equiped! If anyone else is going to order, please place up some photos of the kit installed so we can all see. It will be interesting to see how close the vinyl pieces can get to the master piece. It should look seamless if installed correctly.

Shaun

TommyTSquared · 02-07-2010, 01:57 PM

I wonder if you can get something to black it out completely and not have that space just after the light bezel.

DJ ATOMIX · 02-07-2010, 02:00 PM

Quote:

Originally Posted by TommyTSquared

I wonder if you can get something to black it out completely and not have that space just after the light bezel.

Thats the main focus of this thread, those four pieces are now included

. Once people figure that out, it will turn alot of heads this way for sure.

You can see the vinyl included now that fills that space. On another note, it must be such a challenge for Ridergraphix to cut those pieces as they must be cut pretty much bang on to snug against the main piece.

TommyTSquared · 02-07-2010, 02:02 PM

Ahh ok, guess I read it as meaning something else. Glad to know it was changed

LittleRockCGM · 02-07-2010, 02:05 PM

Just ordered along with the front piece. Will post some pictures when done.

DJ ATOMIX · 02-07-2010, 02:09 PM

Quote:

Originally Posted by TommyTSquared

Ahh ok, guess I read it as meaning something else. Glad to know it was changed

Yeah for sure man! I really like the picture you posted, shows basically what the kit does even thou I know that photo has the blackout painted on. Personally I prefer vinyl over paint as it has a more unique look in comparison to the paint of the car. Vinyl to me tends to pop out more.

Good stuff...

Shaun

scythezo6 · 02-07-2010, 02:09 PM

There's a graphics shop in my town that got that done about a month an a half ago for Acmal's car. I plan on getting mine done soon. Only a 100 bucks

SummoneR · 02-07-2010, 10:24 PM

OMG!! I have been waiting for this!!!! I can't wait to see pictures LittlerockCGM!!

LittleRockCGM · 02-20-2010, 06:30 PM

Quote:

Originally Posted by SummoneR

OMG!! I have been waiting for this!!!! I can't wait to see pictures LittlerockCGM!!

I have posted pictures in this thread showing the LS7 Blackouts by Ridergraphix.

http://www.camaro5.com/forums/showthread.php?t=66830

2010 SSRS · 02-20-2010, 06:52 PM

Nice

DJ ATOMIX · 02-21-2010, 08:32 PM

Quote:

Originally Posted by LittleRockCGM

I have posted pictures in this thread showing the LS7 Blackouts by Ridergraphix.

http://www.camaro5.com/forums/showthread.php?t=66830

OMG, now I wish I had ordered CGM. That has to be one of the best combos I've ever seen with the vinyl used. All I can say is amazing man!

Shaun

SummoneR · 05-19-2010, 02:15 AM

Shaun, did you ever get around to installing the pieces for the light wells? I'd like to see these before I pull the trigger.

02-07-2010, 01:50 PM	#1
DJ ATOMIX << CRAZY BEE >> Drives: 400HP 2LT/RS Join Date: Apr 2009 Location: Alberta Posts: 1,156	Full LS7 Look Rear Fascia Vinyl Blackout Finally Avail! I just thought I would note to everyone that a full blackout vinyl kit is finally here including those four stripes that wernt orginally covered between the rear tail lights and the original blackout kit. As far as I know, this is the first kit out that covers EVERYTHING. I will post photos of it here when I get it installed on my new Camaro when my cammy arrives. I know many of you were on the fence before because the rear fascia wasnt completely blacked. Well now it is http://www.ridergraphix.com/2010_Cam..._Blackout.html The photo used on the website is the original kit which I had on my previous 2010 Camaro. To see what I'm talking about, please note the vinyl diagram of the four new pieces avail. I cant wait to see how this looks equiped! If anyone else is going to order, please place up some photos of the kit installed so we can all see. It will be interesting to see how close the vinyl pieces can get to the master piece. It should look seamless if installed correctly. Shaun __________________ CRAZY BEE - IOM 2LT/RS (more) Cosmetic Mods - 24 \| Performance Mods - 14 ROTO-FAB CAI - DT HEADERS - CUSTOM 3-INCH PIPE EXHAUST - RES DEL - R-CATS DEL - MAGNAFLOW RES X-PIPE - 91 OCTANE TUNE - FULL ADM KIT - PORTED IM - PORTED TB - PORTED CH - BLACK 3/8 ISOLATOR - TRIFECTA TUNED

02-07-2010, 02:05 PM	#5
LittleRockCGM Drives: 2010 Camaro CGM/IOM 2SS/RS Join Date: Oct 2009 Location: Little Rock, AR Posts: 727 View My Garage	Just ordered along with the front piece. Will post some pictures when done. __________________ 2SS/RS CGM/IOM stripes/IOM interior Manual 1100 11/3/09 - Order Submitted (NQTRTW) 2500 11/4/09 - Order Preferenced 3300 11/11/09 - Order Scheduled for Production (TPW 11/23/09) 3400 11/17/09 - Order Broadcast 3800 11/23/09 - Build Complete (VIN: 2G1FT1EWXA9170886) 4000 11/26/09 - Ready to Ship 4200 11/30/09 - Shipped (ETTX854262) 5000 12/11/09 - Delivered to Dealer 6000 12/12/09 - Delivered to Customer (It's Mine!)

02-07-2010, 02:09 PM	#7
scythezo6 Virologist in the making Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009 Location: El Paso TX Posts: 2,865	There's a graphics shop in my town that got that done about a month an a half ago for Acmal's car. I plan on getting mine done soon. Only a 100 bucks __________________ Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family 6000, Delivered to the customer - 12/21/09

02-07-2010, 10:24 PM	#8
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	OMG!! I have been waiting for this!!!! I can't wait to see pictures LittlerockCGM!! __________________

05-19-2010, 02:15 AM	#12
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	Shaun, did you ever get around to installing the pieces for the light wells? I'd like to see these before I pull the trigger. __________________

02-07-2010, 01:57 PM	#2
TommyTSquared Drives: RSSS Join Date: Dec 2009 Location: DFW Posts: 2,492	I wonder if you can get something to black it out completely and not have that space just after the light bezel.

02-07-2010, 02:02 PM	#4
TommyTSquared Drives: RSSS Join Date: Dec 2009 Location: DFW Posts: 2,492	Ahh ok, guess I read it as meaning something else. Glad to know it was changed

02-20-2010, 06:52 PM	#10
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	Nice

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting up an IRS/Drivetrain for Drag Racing	Kyle2k	Suspension / Brakes / Chassis	44	06-05-2010 10:17 PM
Colored rear bowtie and truck blackout	Tonka	Camaro Photoshops / Renderings Forum	2	07-27-2009 01:38 PM
Vinyl Blackout Kits	1_2Many	Cosmetics and Lighting Modification Discussions	28	06-26-2009 05:45 PM
4 SEMA CAMAROS finally unveiled by GM! (hi-res images & details)	FenwickHockey65	Camaro Photos \| Spyshots \| Video \| Media Gallery	237	11-03-2008 11:39 PM