MRT v1.0 - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cyberLS · 05-20-2011, 09:28 PM

ordered mine last night hope they sound great

BenningJ · 05-21-2011, 09:55 AM

Yeah you are going to love them. I sure do and the girlfriends says they aren't too bad.

cyberLS · 05-21-2011, 12:12 PM

yea idk about mine she wont like the loudness... eh

CraziGuy · 05-21-2011, 09:21 PM

Quote:

Originally Posted by cyberLS

yea idk about mine she wont like the loudness... eh

BenningJ · 05-22-2011, 10:18 PM

Quote:

Originally Posted by cyberLS

yea idk about mine she wont like the loudness... eh

You will just have to see. My girlfriend is one of the most whiny people when it comes to loud cars. I'm pretty sure she takes the cake on that one. Although I will be installing some dynamat to remove a little bit of the drone in the cabin. It isn't horrible by any means but it is enough to start drowning out the lower frequencies of the music.

cyberLS · 05-22-2011, 10:43 PM

Quote:

Originally Posted by BenningJ

You will just have to see. My girlfriend is one of the most whiny people when it comes to loud cars. I'm pretty sure she takes the cake on that one. Although I will be installing some dynamat to remove a little bit of the drone in the cabin. It isn't horrible by any means but it is enough to start drowning out the lower frequencies of the music.

Alright i will have to check and hope for the best but i am sure i will love the sound.

DJ ATOMIX · 05-25-2011, 11:31 AM

Quote:

Originally Posted by BenningJ

Well as promised I got a better video. Enjoy.

They get quieter and quieter and smoother as time goes by. I've now put more than 2000KM on the new exhaust and it sounds noticebly smoother than day 1 which has now been over a month!

To be honest, I'm now seriously considering a full resonator delete as the exhaust has tammed up that much.

Shaun

ltrcola · 05-25-2011, 01:46 PM

Good deal man! I am definitely interested in a listen sometime. Sounds like you installed yours pretty much the same way I did my gibsons. Except I suck at using a sawzall underneath the car :/

Just curious why you went with the 1.0 instead of the 2.0? I do know mine seem like they've quieted down a bit after taking a road trip with the car.

BenningJ · 05-25-2011, 02:55 PM

Yeah we will have to get together sometime Shea. I would like to hear your Gibsons. I chose the MRT 1.0 because it has more growl than 2.0. I just preferred the louder sound. These v1.0 are great. I don't mind the minimal drone and these are far quieter than the dual Flowmaster 40's on my 1976 Camaro. Now those are insane! As for the quiet down after time, I hope they don't get too quiet. So far I have put about 500 miles on them and they seem to have gotten a little softer, I guess time will tell.

Sasquatch · 05-25-2011, 04:29 PM

i like the sound you have achieved. thanks for the videos.

BenningJ · 05-25-2011, 10:55 PM

You are quite welcome Sasquatch.

Sterling · 05-27-2011, 11:14 PM

I just put in my order... I'm so excited! I've been waiting a year and a half to do this! I really want the "ghost cam" tune and I need to be able to hear that idle...

cyberLS · 05-28-2011, 12:12 AM

Quote:

Originally Posted by sterlingnotes

I just put in my order... I'm so excited! I've been waiting a year and a half to do this! I really want the "ghost cam" tune and I need to be able to hear that idle...

You will love it. Got mine installed today and dont want to stop driving it ha

Sterling · 05-28-2011, 10:55 PM

Quote:

Originally Posted by cyberLS

You will love it. Got mine installed today and dont want to stop driving it ha

I'm like that with the stock exhaust already!

05-21-2011, 09:55 AM	#30
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Yeah you are going to love them. I sure do and the girlfriends says they aren't too bad. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

05-25-2011, 02:55 PM	#37
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Yeah we will have to get together sometime Shea. I would like to hear your Gibsons. I chose the MRT 1.0 because it has more growl than 2.0. I just preferred the louder sound. These v1.0 are great. I don't mind the minimal drone and these are far quieter than the dual Flowmaster 40's on my 1976 Camaro. Now those are insane! As for the quiet down after time, I hope they don't get too quiet. So far I have put about 500 miles on them and they seem to have gotten a little softer, I guess time will tell. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

05-25-2011, 10:55 PM	#39
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	You are quite welcome Sasquatch. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

05-27-2011, 11:14 PM	#40
Sterling Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007 Location: Fairhaven, MA Posts: 5,882 View My Garage	I just put in my order... I'm so excited! I've been waiting a year and a half to do this! I really want the "ghost cam" tune and I need to be able to hear that idle... __________________ Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MRT V1.0 Installed	cshannon	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	13	10-30-2010 03:46 PM
MRT v1.0???	victoryredRS	Forced Induction - V6	7	09-18-2010 08:54 PM
MRT v1.0 + JBA Shorties?	JChen	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	46	04-06-2010 10:05 AM
MRT v1.0 vs. v2.0	JChen	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	8	03-07-2010 10:39 PM
Anyone in the GTA wit MRT v1.0	francone13	Canada	0	12-12-2009 03:21 PM

05-20-2011, 09:28 PM	#29
cyberLS Drives: 2010 Cyber Grey LS Join Date: Mar 2010 Location: Santa Clara Posts: 2,224 View My Garage	ordered mine last night hope they sound great

05-21-2011, 12:12 PM	#31
cyberLS Drives: 2010 Cyber Grey LS Join Date: Mar 2010 Location: Santa Clara Posts: 2,224 View My Garage	yea idk about mine she wont like the loudness... eh

05-25-2011, 01:46 PM	#36
ltrcola Drives: SIM 2LT/RS Join Date: May 2010 Location: Des Moines, IA Posts: 46 View My Garage	Good deal man! I am definitely interested in a listen sometime. Sounds like you installed yours pretty much the same way I did my gibsons. Except I suck at using a sawzall underneath the car :/ Just curious why you went with the 1.0 instead of the 2.0? I do know mine seem like they've quieted down a bit after taking a road trip with the car.

05-25-2011, 04:29 PM	#38
Sasquatch C5 THAKILYETI Drives: 2LTRS Join Date: Aug 2010 Location: Bay Area, CA Posts: 367	i like the sound you have achieved. thanks for the videos.