!!!OFFICIAL!!! SoCal Head Turners thread - Page 408 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bajamoon · 12-20-2011, 12:48 AM

Quote:

Originally Posted by TCAT

Alex, screw that splitter on. That's one of the only ways a splitter actually stays.

Yeah screw the spiltter

Tom D · 12-20-2011, 12:57 AM

Red Jewel one is mine. Tranny ot blown just can't handle the new power. 2nd keeps slipping.

Quote:

Originally Posted by SRT10KLLR

Nice!

I saw your car last week at the shop. Jr was waiting for the intake tube to come back from the painter. There was also a Red Jewwl one there with a blown tranny.

Marine2011 · 12-20-2011, 01:12 AM

Quote:

Originally Posted by BROMARO909

So finally got my car back. I was so excited then I saw of course didn't see this until I got home that my front splitter was not attached to my bumper anymore........ It was plastic epoxied to the bumper. How the hell did it come off. I'm kinda pissed. I need another solution to this issue cause obviously the epoxy wasn't strong enough

Yea use some screws I had the screw my front gfx on just to make sure it does not come off...

chrisc32 · 12-20-2011, 01:14 AM

Quote:

Originally Posted by TCAT

Their website says $289, so I would assume you take 50% off of that, totalling $145.

I might get sum then where the shop

TCAT · 12-20-2011, 01:19 AM

The shop is in Oxnard (somewhat close to the Camarillo outlet mall). Just call them and order. Tell them you heard about their 50% off deal.

BROMARO909 · 12-20-2011, 01:33 AM

Yea I'm prob gonna end up screwing it in. Just not sure were to screw it in. Cause it's coming off on the sides

MichaelH · 12-20-2011, 01:39 AM

i got my socal head turners decals today and shirt they both look sick

. Also met Leo today very cool guy and i will hopefully see most of you at the next meet

Marine2011 · 12-20-2011, 01:43 AM

Quote:

Originally Posted by BROMARO909

Yea I'm prob gonna end up screwing it in. Just not sure were to screw it in. Cause it's coming off on the sides

Double sided tape??

ChvyBoss · 12-20-2011, 04:32 AM

Quote:

Originally Posted by MichaelH

i got my socal head turners decals today and shirt they both look sick

. Also met Leo today very cool guy and i will hopefully see most of you at the next meet

CONGRATS !! And welcome to SoCal HT. Looking fwd to meeting you

GunnyG · 12-20-2011, 04:38 AM

Quote:

Originally Posted by MichaelH

i got my socal head turners decals today and shirt they both look sick

. Also met Leo today very cool guy and i will hopefully see most of you at the next meet

Guess I gotta pay some dues first. Man it sucks being a FNG!!!

bajamoon · 12-20-2011, 09:36 AM

Quote:

Originally Posted by BROMARO909

Yea I'm prob gonna end up screwing it in. Just not sure were to screw it in. Cause it's coming off on the sides

Screw the sides on. Mine was falling off on the sides as well. I also had two small bolts on the bottom center.

Quote:

Originally Posted by Marine2011

Double sided tape??

Shit doesn't work.

BROMARO909 · 12-20-2011, 10:41 AM

Quote:

Originally Posted by MichaelH

i got my socal head turners decals today and shirt they both look sick

. Also met Leo today very cool guy and i will hopefully see most of you at the next meet

You can be honest about Leo bro I know he is the CEO but its ok haha welcome to the club homie

BROMARO909 · 12-20-2011, 10:44 AM

I put some double sided tape on last night and used a C clamp to keep the pressure on over night and it seems pretty solid. Can you post a pic of the screw you put in the splitter baboo?

bajamoon · 12-20-2011, 10:55 AM

Quote:

Originally Posted by BROMARO909

I put some double sided tape on last night and used a C clamp to keep the pressure on over night and it seems pretty solid. Can you post a pic of the screw you put in the splitter baboo?

Me?? I never did that but most people that have the stillen splitter did that. I just took it off and it's hanging in my garage.

12-20-2011, 01:33 AM	#5704
BROMARO909 SO CAL HEAD TURNERS Drives: 2010 CHEVY BROMARO Join Date: Apr 2010 Location: AGOURA HILLS, CA Posts: 774	Yea I'm prob gonna end up screwing it in. Just not sure were to screw it in. Cause it's coming off on the sides __________________ SOCAL HEADTURNERS APPEARANCE MODS: STILLEN FRONT SPLITTER, CUSTOM PAINTED BOWTIE, TINTED FOGLIGHTS, BLACKED OUT RIMS, CUSTOM PAINTED BRAKE CALIPERS, BLACKED OUT KEYHOLE, 35% FRONT 15% REAR WINDOWS, TINTED TAIL LIGHS, BLACKED OUT TRUNK LID. LIGHTING MODS: BFXENON 6K HID KIT, STEALTH TURN SIGNAL BULBS, LED FOG LIGHT BULBS. INTERIOR MODS: RED LED BULBS IN MAP/TRUNK, FLAT BLACK CLUSTER BEZEL, CUSTOM PAINTED SHIFTER BEZEL PERFORMANCE MODS: BLASTIN BOBS AXLEBACK EXHAUST SYSTEM, HURST SHORT THROW SHIFTER, H&R SPORT LOWERING SPRINGS

12-20-2011, 01:39 AM	#5705
MichaelH SOCAL HT5 Drives: 2013 BRM ZL1 M6 Join Date: Apr 2010 Location: NE Ohio Posts: 1,495 View My Garage	i got my socal head turners decals today and shirt they both look sick . Also met Leo today very cool guy and i will hopefully see most of you at the next meet __________________ 2013 ZL1 M6 - Mods-in the works Old vehicles 2010 CGM Camaro (sold) Other Vehicles: 2008 Kawasaki ZX6R-115 RWHP in mid summer 2006 Chevy Trailblazer SS- For Sale; Lots of extras

12-20-2011, 10:44 AM	#5711
BROMARO909 SO CAL HEAD TURNERS Drives: 2010 CHEVY BROMARO Join Date: Apr 2010 Location: AGOURA HILLS, CA Posts: 774	I put some double sided tape on last night and used a C clamp to keep the pressure on over night and it seems pretty solid. Can you post a pic of the screw you put in the splitter baboo? __________________ SOCAL HEADTURNERS APPEARANCE MODS: STILLEN FRONT SPLITTER, CUSTOM PAINTED BOWTIE, TINTED FOGLIGHTS, BLACKED OUT RIMS, CUSTOM PAINTED BRAKE CALIPERS, BLACKED OUT KEYHOLE, 35% FRONT 15% REAR WINDOWS, TINTED TAIL LIGHS, BLACKED OUT TRUNK LID. LIGHTING MODS: BFXENON 6K HID KIT, STEALTH TURN SIGNAL BULBS, LED FOG LIGHT BULBS. INTERIOR MODS: RED LED BULBS IN MAP/TRUNK, FLAT BLACK CLUSTER BEZEL, CUSTOM PAINTED SHIFTER BEZEL PERFORMANCE MODS: BLASTIN BOBS AXLEBACK EXHAUST SYSTEM, HURST SHORT THROW SHIFTER, H&R SPORT LOWERING SPRINGS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Release Thread of the ******** 2010 Camaro Plug N Play RCA T-Harness	Steve@Subthump	Audio / Visual / Electronics/ Gauges / Nav	201	06-07-2011 09:06 PM
Official Camaro SL,UT C5FESTII Thread	SSOOCH	USA - Southwest	70	04-17-2011 11:47 PM
PWA "The Lounge"	DGthe3	Off-topic Discussions	143773	11-06-2010 12:00 PM
OFFICIAL Photo Thread from the SA Photoshoot 11-22-2009	CamaroSkooter	USA - Texas	39	12-09-2009 11:45 PM
Official $5999 Ultimate Performance Single Turbo kit for sale thread.	JTinFL	Forced Induction	30	10-21-2009 07:43 PM

12-20-2011, 01:19 AM	#5703
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	The shop is in Oxnard (somewhat close to the Camarillo outlet mall). Just call them and order. Tell them you heard about their 50% off deal.