Colorado members check in here

[AquaCam]

Originally Posted by brads 1ss

Thanks for the input , was looking at pfadt diff. bushing as well as there control arms with toe link . I like the weld wheel selection , any good local suppliers anybody now of ?? I'm thinking the 17'" is the way I am going

Just a quick update on the brakes. Brought it to the Dealer and there is a "Memo" out from GM that replaces the original pad with a damper modification (2 rollers) to address Camaro owner complaints on brake noise. The good news is that its apparently covered under the 3 year warranty - the bad news is that it WON'T FIT under my 18 inch Scorpion winter tires...

[SinisterEcho]

Just wanted to swing by and thank everyone for their input on the questions that I had about the different tuner shops in Colorado. I decided to go with Clint at AIR... He was awesome to work with and he explained everything to me during the entire process. I will definitely be a repeat customer. And here are the results from my time at his shop...

[Blue70SS]

Originally Posted by AquaCam

Just a quick update on the brakes. Brought it to the Dealer and there is a "Memo" out from GM that replaces the original pad with a damper modification (2 rollers) to address Camaro owner complaints on brake noise. The good news is that its apparently covered under the 3 year warranty - the bad news is that it WON'T FIT under my 18 inch Scorpion winter tires...

Interesting point for Brad..... If you have the "rollers" to dampen noise, the 17" wheels won't fit. It's close enough already that balancing wheel wieghts have to be strategically placed.

Originally Posted by SinisterEcho

Just wanted to swing by and thank everyone for their input on the questions that I had about the different tuner shops in Colorado. I decided to go with Clint at AIR... He was awesome to work with and he explained everything to me during the entire process. I will definitely be a repeat customer. And here are the results from my time at his shop...

Nice #s Be carefull about the clamp on the exhaust those nice exhaust tips... it'll scratch em up in a hurry. They need to be attached to a heavy block instead. Sounds like your getting ready for the high elevation It'll be fun to see more Camaros this summer.

[Blue70SS]

Originally Posted by Clint@A.I.R.

Mike is was great working with you and your car as well.. Got a lot done in the few hours you were here.

Got the Wideband working, exhaust leak taken car of, colder spark plugs, RX catch can lines hooked up, and Tweaked the Janetty Speed density tune. First pull was 500rwhp to 6,000 rpms, ended at 565rwhp at 6500 rpms.

Good numbers for 5 psi of boost.

Looking forward to getting more boost out of her. :-)

Have a good sunday.

Clint

What was the HP @ 6000 rpm on the final pull vs 1st pull?

[Casper45th]

Originally Posted by AquaRSSS

Just called and got the last room in the Camaro block. Now just gotta hope I'm here and not in AFG...

Hope you can make it too. It's going to be a blast for sure! Thank you for your service. Hope to be shaking your hand and get a chance to say thanks face to face. I know we will have quite a few military folks there.

[SinisterEcho]

Originally Posted by Blue70SS

Interesting point for Brad..... If you have the "rollers" to dampen noise, the 17" wheels won't fit. It's close enough already that balancing wheel wieghts have to be strategically placed.



Nice #s Be carefull about the clamp on the exhaust those nice exhaust tips... it'll scratch em up in a hurry. They need to be attached to a heavy block instead. Sounds like your getting ready for the high elevation It'll be fun to see more Camaros this summer.

Thanks! The tip on that side was already a bit dinged up so no worries I daily drive mine so im sure you might see me out and about sometime.

Wonder why Clint's account got suspended

[Ace1USMC]

Originally Posted by SinisterEcho

Wonder why Clint's account got suspended

Because he didn't wanna keep paying the $1500 sponsor fee.

[SinisterEcho]

Originally Posted by Ace1USMC

Because he didn't wanna keep paying the $1500 sponsor fee.

Can't blame him on that... That's a hefty price....

[ToolFan66]

My guess is he forgot to pay his fees, I would like to think he will be back..

[ToolFan66]

Originally Posted by Ace1USMC

Because he didn't wanna keep paying the $1500 sponsor fee.

Guess I should learn to scroll down a little further..

Where in conifer do you live? I drive up that way just for the drive and circle my way around to evergreen and back home now and then..

I live right around Bowles and C470..

[TeddyP25]

Originally Posted by SinisterEcho

Thanks! The tip on that side was already a bit dinged up so no worries I daily drive mine so im sure you might see me out and about sometime.

Wonder why Clint's account got suspended

Saw ya the other day....im in the Harmony/Timberline area

[SinisterEcho]

Originally Posted by TeddyP25

Saw ya the other day....im in the Harmony/Timberline area

Awesome! I actually live on battlecreek just off timberline. If you were driving your Camaro i probably saw you too. Or that nasty R8 that flew by me yesterday morning.....

[TeddyP25]

Originally Posted by SinisterEcho

Awesome! I actually live on battlecreek just off timberline. If you were driving your Camaro i probably saw you too. Or that nasty R8 that flew by me yesterday morning.....

I see that R8 a lot. I'll keep my eyes out for ya, my kids have friends all over the battle creek area.

[SinisterEcho]

Originally Posted by TeddyP25

I see that R8 a lot. I'll keep my eyes out for ya, my kids have friends all over the battle creek area.

That R8 is

Ill keep an eye out for you too! But im sure with your list of mods your camaro is asleep for the winter.