How Many Use The DashLogic on there ZL1? - Page 16 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Unreal · 01-07-2015, 08:32 PM

To the dashlogic. It has 2 inputs for aftermarket sensors. Then you can program whatever you want. Most meth kits also have an indicator light that is a 0-5V out, so you could have that tapped into also then program is so if PSI>4psi or whatever the meth activation point it, and indicator isn't on, then trip an alarm on dash.

KaBoom1701 · 01-08-2015, 09:05 PM

So what is a safe trans temp alert temperature to use for our ZL1's?

KaBoom1701 · 01-13-2015, 04:41 PM

Quote:

Originally Posted by KaBoom1701

So what is a safe trans temp alert temperature to use for our ZL1's?

Anyone?

370zyzfr1 · 01-13-2015, 08:29 PM

Does having an aftermarket stereo affect this at all? Will it still work as normal? Probably has nothing to do with stereo but not sure. Just trying to learn more about this.

revobasher · 01-13-2015, 09:37 PM

I don't think having an aftermarket stereo would matter. Obviously would only be able to display on DIC and HUD.

Unreal · 01-14-2015, 08:36 AM

Agreed, the display on radio wouldn't work but HUD and DIC should not be affected.

revobasher · 01-14-2015, 11:49 AM

Make sure you get the extension cable

http://www.amazon.com/dp/B00GGLVXG2/...140_TE_3p_dp_1

370zyzfr1 · 01-15-2015, 02:26 PM

Does the dash logic show quarter mile times? How does that work?

forcefedjunkie · 02-10-2015, 02:59 PM

Just to add my experience, mine worked once and now it won't display anything on any of the 3 displays no matter what I do. I've contacted Palmer Engineering and we'll see what they say.

wirebender · 02-10-2015, 03:20 PM

Try pulling the cluster fuse and then plug it back in....with car on.

forcefedjunkie · 02-11-2015, 10:01 AM

Quote:

Originally Posted by wirebender

Try pulling the cluster fuse and then plug it back in....with car on.

It won't work if car is off? Just leery of doing this with the vehicle running, don't want to damage anything. Is this a way of resetting the control module for the cluster?

wirebender · 02-12-2015, 01:51 PM

Yes. Did it to mine with no problem. It won't hurt anything.

bdjohns · 03-18-2015, 10:11 AM

When viewing the knock display, should it stay at 0 or should it show a reading of like 6,7.
What is a safe reading is what I'm asking.

Thanks,

2013 ZL1 #7860 · 03-18-2015, 10:24 AM

Quote:

Originally Posted by bdjohns

When viewing the knock display, should it stay at 0 or should it show a reading of like 6,7.
What is a safe reading is what I'm asking.

Thanks,

Are you talking about knock retard?
ZERO 0 is what you want!
6-7 means you are having some issues which need to be looked at immediately.

01-07-2015, 08:32 PM	#211
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	To the dashlogic. It has 2 inputs for aftermarket sensors. Then you can program whatever you want. Most meth kits also have an indicator light that is a 0-5V out, so you could have that tapped into also then program is so if PSI>4psi or whatever the meth activation point it, and indicator isn't on, then trip an alarm on dash. __________________ Nick Corvette Z06 -1200ish rwhp

01-08-2015, 09:05 PM	#212
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	So what is a safe trans temp alert temperature to use for our ZL1's? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

01-13-2015, 09:37 PM	#215
revobasher Drives: 2013 ZL1 Join Date: Oct 2014 Location: Blaine, MN Posts: 552	I don't think having an aftermarket stereo would matter. Obviously would only be able to display on DIC and HUD. __________________ -- 2013 ZL1 - Blue Ray Metallic JDP 850 Package 740hp/700tq @14lbs on E85 Build Thread

01-14-2015, 08:36 AM	#216
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	Agreed, the display on radio wouldn't work but HUD and DIC should not be affected. __________________ Nick Corvette Z06 -1200ish rwhp

01-14-2015, 11:49 AM	#217
revobasher Drives: 2013 ZL1 Join Date: Oct 2014 Location: Blaine, MN Posts: 552	Make sure you get the extension cable http://www.amazon.com/dp/B00GGLVXG2/...140_TE_3p_dp_1 __________________ -- 2013 ZL1 - Blue Ray Metallic JDP 850 Package 740hp/700tq @14lbs on E85 Build Thread

01-13-2015, 08:29 PM	#214
370zyzfr1 Drives: 2014 Camaro Zl1 Tripple Black! Join Date: Nov 2014 Location: Iowa Posts: 383	Does having an aftermarket stereo affect this at all? Will it still work as normal? Probably has nothing to do with stereo but not sure. Just trying to learn more about this.

01-15-2015, 02:26 PM	#218
370zyzfr1 Drives: 2014 Camaro Zl1 Tripple Black! Join Date: Nov 2014 Location: Iowa Posts: 383	Does the dash logic show quarter mile times? How does that work?

02-10-2015, 02:59 PM	#219
forcefedjunkie Drives: '14 ZL1, Duramax H2 Join Date: Apr 2012 Location: ohio Posts: 58	Just to add my experience, mine worked once and now it won't display anything on any of the 3 displays no matter what I do. I've contacted Palmer Engineering and we'll see what they say. Last edited by forcefedjunkie; 02-11-2015 at 10:02 AM.

02-10-2015, 03:20 PM	#220
wirebender Drives: 2017 ZL1, A10, White, sunroof, nav Join Date: Apr 2009 Location: Garner, NC Posts: 720 View My Garage	Try pulling the cluster fuse and then plug it back in....with car on.

02-12-2015, 01:51 PM	#222
wirebender Drives: 2017 ZL1, A10, White, sunroof, nav Join Date: Apr 2009 Location: Garner, NC Posts: 720 View My Garage	Yes. Did it to mine with no problem. It won't hurt anything.

03-18-2015, 10:11 AM	#223
bdjohns Drives: 2013 Camaro ZL1 Join Date: Feb 2015 Location: United States Posts: 8	When viewing the knock display, should it stay at 0 or should it show a reading of like 6,7. What is a safe reading is what I'm asking. Thanks,