Refinishing calipers. My project for the last two weeks

[Hellfighter]

Originally Posted by Mando2776

Here’s my set I got powder coated. I Like the color, it really pops! I get many compliments.

Any fitment issues? pealing issues, fitment, meaning as in the powder getting in the bleeder slots or the caliper spots where the pistons go, what about the pin holes etc, any fitment issues with that? also how much did it all cost? is the brembo sign clear coated?

[Mando2776]

Originally Posted by Hellfighter

Any fitment issues? pealing issues, fitment, meaning as in the powder getting in the bleeder slots or the caliper spots where the pistons go, what about the pin holes etc, any fitment issues with that? also how much did it all cost? is the brembo sign clear coated?

NO Issues at all, had them on for 9 months so far . Powder didn’t get in the bleeder slots, since the screw holes are plugged and sealed in the process. The pistons are removed holes are taped off and then re installed with new seals.
The pin holes are clear with no chipping. It all depends how well your powder coater is. The lettering is not clear coated with this set up as the paint choice I went with would cause the lettering to bleed after clear coat… regardless they have stayed glued and cleaned. I opted for ceramic brakes, which have helped tremendously with brake dust. I paid somewhere in the $350, Contact TPH coatings on here.

[Hellfighter]

good stuff.