![]() |
|
|
#295 |
![]() Drives: '10 Black 1SS/RS Join Date: Jun 2008
Location: Honolulu, HI
Posts: 358
|
Mike, that sounds about right. My car made it to 3800 on May 22. It didn't get here until about 2 weeks ago. So mine took roughly 1 1/2 months to get here.
Nash
__________________
VIN # 11879, 1SS/RS, born 5/22/2009.
![]() |
|
|
|
|
|
#296 | |
![]() |
yup first one.... i ordered a stick (autos had no issues) and my car was picked for QC (quality control) and i think its 1 of 12 cars still held over for some issues.... due out within a couple of weeks.... it may be out any day now but really hard to get exact info on it.... i guess I'm the "lucky" one....
if i ordered an auto it would have been the first one here..... i do have a low VIN 9585 ![]() Quote:
|
|
|
|
|
|
|
#297 |
![]() Drives: 2SS/RS Black/Black Join Date: Jul 2009
Location: HNL
Posts: 41
|
Thanks All,
Hope to get my vin early next week... then we wait again... |
|
|
|
|
|
#298 | |
|
Taz
|
Quote:
I dont know if you heard, but the V6 camaro at Leeward Servco was sold to JN Chevy and they sold it a week later with a large markup. They have already been trying to purchase the Yellow V6 at Windward, but they wont sell it to JN. JN must be making a killing buying the ones on island and reselling them at a high markup. Mike |
|
|
|
|
|
|
#299 |
|
More then meets the eye!
|
Thiy told me they will ship it monday, or wensday, cant wait.
__________________
2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.
|
|
|
|
|
|
#300 |
|
Taz
|
By the way, the seat does adjust to raise it higher for folks who are a little bit on the shorter size. My girlfriend in 5 foot 2 inches and she can see fine after raising the seat.
Its kinda interesting is that I have more blindspots in my BMW X5 than I do in the camaro. Only thing I had to get used to is the large rear view mirror. I cuts out alot of the front window view. After a while, you get used to it. Mike Mike |
|
|
|
|
|
#301 | |
|
More then meets the eye!
|
Quote:
not fair, j/k
__________________
2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.
|
|
|
|
|
|
|
#302 |
|
Taz
|
Yes, I got the call on friday and picked it up on saturday. It was parked across from yours and they had alot of people checking them out. By the way, I heard your car ships on wednesday and should have it either thursday or friday. Just in time for the weekend!!!
Mike |
|
|
|
|
|
#303 |
![]() Drives: VStar 1100 Classic, 2010 CGM 2SS/RS Join Date: Mar 2009
Location: GMT -10hrs
Posts: 403
|
Finally saw my first camaro on the road. Both were near the Subway in Pearl Harbor. Both were black, with paper plates and difference is one was from cutter and the other from JN.
__________________
|
|
|
|
|
|
#304 | |
|
More then meets the eye!
|
Quote:
__________________
2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.
|
|
|
|
|
|
|
#305 |
|
Taz
|
I saw a yellow camaro in Hawaii Kai with paper Cutter plates.Wont be long before it becomes common to see a camaro on the roads.
|
|
|
|
|
|
#306 | |
|
Taz
|
Quote:
Mike |
|
|
|
|
|
|
#307 |
![]() |
There's a possibility that there are 2010 Camaro/s on the Big Island. Possibly for rental? My friend just told me he saw it a week ago. I'm hoping it's true. I'm going to do a little investigating. Also it seems like the Hilo Chevy dealership is open for service? However, there are 2 Corvettes in the showroom. But no cars in front of the dealership. That place was totally empty not too long ago, including the service area.
__________________
|
|
|
|
|
|
#308 |
![]() Drives: '10 Black 1SS/RS Join Date: Jun 2008
Location: Honolulu, HI
Posts: 358
|
Mike, good to see you got your car. Jon were you able to pick up your car yet? You're both going to have so much fun with the attention you get. I've had my car for 2 weeks now and I still have people that live near me wanting to talk about the car. On the road I see people looking and pointing. It's so much fun.
Nash
__________________
VIN # 11879, 1SS/RS, born 5/22/2009.
![]() |
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Welcome for new members. Come say hello! | Moose | New Member Introductions | 1593 | 10-18-2025 12:03 AM |
| How many forum members does it take to change a lightbulb? | stovt001 | Off-topic Discussions | 28 | 05-26-2009 10:17 PM |
| # Of Members | TAG UR IT | Site Related Announcements / Suggestions / Feedback / Questions | 25 | 03-16-2008 12:47 PM |
| 1000 Members Strong! Welcome to Eleven11. | TAG UR IT | Off-topic Discussions | 14 | 07-10-2007 11:27 PM |