10-04-2009, 05:42 PM | #15 |
Drives: 2010 SS, 2002 Z/28 Join Date: Jun 2009
Location: Ocean City
Posts: 54
|
do not put a hair dryer to flat black stripes, the may gloss-up.
|
10-04-2009, 05:58 PM | #16 |
Drives: 2LT RS Silver Ice w/Cyber Grey strp Join Date: Sep 2009
Location: Kunsan AB, Republic of Korea. Car is stored
Posts: 146
|
Preston Hood Chev in FOrt Walton beach is charging $550 to paint them on. Seen the work, looks awsome. I put my own vynal on for $150 to decide color. Ice blue met on Silver Ice...looks awsome IMOP. I did mine in about an hour and half and have no wrinkles/bubbles. Look painted until you touch the edges. Make sure the dealers are preping the area, nice clean and lint free then install using wet method in a smaller area not the open service bay thats dirty.
|
10-04-2009, 06:01 PM | #17 |
Drives: 2LT RS Silver Ice w/Cyber Grey strp Join Date: Sep 2009
Location: Kunsan AB, Republic of Korea. Car is stored
Posts: 146
|
here is my RS with a different color than standard stripes I installed myself, also re-did the bow ties in the same ice silver blue met.
|
10-04-2009, 06:28 PM | #18 |
|
Ironically, before reading this thread, I noticed a horizontal bubbling on my rear spoiler yesterday. I also found a couple of cuts in the stripe on the front, that must have happened during installation, and only now they became noticeable, possibly lifting on their own. It's only a matter of time, that any mistakes in installation would start to surface.
I've had my car for 3 months, and the dealer contracted out the installation, because the guys at the dealer were afraid of srewing up the stripes. So much for contracting out to professionals. I will be taking the car back to the dealer.
__________________
Frank
(Drive Safely & Responsibly) |
10-04-2009, 10:29 PM | #19 | |
Madman
|
pained stripes//
Quote:
860.00 http://s599.photobucket.com/albums/t...scamaro016.jpg Last edited by Alfieboy; 10-04-2009 at 10:32 PM. Reason: pic |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Supercharger / Turbocharger Results (INFO) Thread | radz28 | Forced Induction - V8 | 273 | 08-15-2023 04:44 PM |
g5cr cai system anybody install or looking at one "pics" | camarossrs2150 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 41 | 07-14-2011 08:26 PM |
Hot air Intakes -By Kenne bell | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 66 | 02-08-2011 08:33 PM |
RAM AIR MYTH OR TRUTH | JANNETTYRACING | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 30 | 06-18-2010 11:41 PM |
List of Intakes that will work with the TVS-2300 MagnaCharger | JJ2010 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 26 | 03-19-2010 02:11 AM |