Late Model Racecraft LFX Heads/ Cams R&D - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

crc91 · 11-23-2014, 08:35 AM

Well said

Jason@JacFab · 11-23-2014, 01:17 PM

I have a set of llt heads I would sell them cheap, complete, with cams.

KMPrenger · 11-23-2014, 02:43 PM

Lets get it done boys.

By the way...where would they be getting the LFX cams? I followed all of that stuff pretty closely and last I recall is that the LFX cams from MACE were still a no-go, but the LLT cams are good to go. In fact, we have one member on the forums that is running the LLT cams in his car right now with no problems.

Before cam on first post and after cam, somewhere on the 2nd page I think? http://www.camaro5.com/forums/showthread.php?t=373247

He went from 250rwhp to 290rwhp with just cams. That's fantastic, but the big question is that he also got a new timing chain installed when the cams were done. It was never even decided for sure if he needed the chain, but he thought he might so he had that done too. So in the end we don't know if all 40rwhp was from the cams or if just most of that was? Says the car pulls hard though...I don't doubt that.

Based on this, I think a good cams/heads/tune job would yield 50 - 80rwhp. I'd love to see this done.

crc91 · 11-23-2014, 05:17 PM

It'd be pretty exciting!

crc91 · 11-25-2014, 12:57 AM

This guy needs to joing the forum and get involved with us we sure would love some cams and better heads!

sycraft · 11-25-2014, 08:04 AM

I will get him here after the holidays, I am not in town right now.

crc91 · 11-25-2014, 10:33 AM

Quote:

Originally Posted by sycraft

I will get him here after the holidays, I am not in town right now.

Awesome, thanks!

jcharrier · 12-18-2014, 01:16 PM

Any news on this yet?

sycraft · 05-31-2016, 06:54 AM

They dod not do anything.. but call powerfab in houston

Sent from my SM-N920P using Tapatalk

Kenny Camaro · 05-31-2016, 04:21 PM

Yes sir!

killercamaro23 · 01-23-2018, 10:26 AM

Do they still port the heads? what happened with the cams?

11-23-2014, 08:35 AM	#127
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	Well said __________________ Patiently waiting for my 2023 SS 1LE

11-23-2014, 01:17 PM	#128
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Late Model Racecraft LFX Heads/ Cams R&D I have a set of llt heads I would sell them cheap, complete, with cams.

11-23-2014, 02:43 PM	#129
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,957	Lets get it done boys. By the way...where would they be getting the LFX cams? I followed all of that stuff pretty closely and last I recall is that the LFX cams from MACE were still a no-go, but the LLT cams are good to go. In fact, we have one member on the forums that is running the LLT cams in his car right now with no problems. Before cam on first post and after cam, somewhere on the 2nd page I think? http://www.camaro5.com/forums/showthread.php?t=373247 He went from 250rwhp to 290rwhp with just cams. That's fantastic, but the big question is that he also got a new timing chain installed when the cams were done. It was never even decided for sure if he needed the chain, but he thought he might so he had that done too. So in the end we don't know if all 40rwhp was from the cams or if just most of that was? Says the car pulls hard though...I don't doubt that. Based on this, I think a good cams/heads/tune job would yield 50 - 80rwhp. I'd love to see this done. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

11-23-2014, 05:17 PM	#130
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	It'd be pretty exciting! __________________ Patiently waiting for my 2023 SS 1LE Last edited by crc91; 11-25-2014 at 10:32 AM.

11-25-2014, 12:57 AM	#131
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	This guy needs to joing the forum and get involved with us we sure would love some cams and better heads! __________________ Patiently waiting for my 2023 SS 1LE

11-25-2014, 08:04 AM	#132
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	I will get him here after the holidays, I am not in town right now. __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

12-18-2014, 01:16 PM	#134
jcharrier Drives: 2013 2lt rs Join Date: Mar 2014 Location: louisiana Posts: 88 View My Garage	Any news on this yet?

05-31-2016, 06:54 AM	#135
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	They dod not do anything.. but call powerfab in houston Sent from my SM-N920P using Tapatalk __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

05-31-2016, 04:21 PM	#136
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Yes sir!

01-23-2018, 10:26 AM	#137
killercamaro23 Drives: 2012 camaro 2LS Join Date: Nov 2016 Location: Florida Posts: 101	Do they still port the heads? what happened with the cams? __________________ 3.91 Gears, Ported Intake Manifold, Intake Manifold Spacer, 80mm Throttle Body, Cold Air Inductions Intake, Trifecta Tune, Solo HighFlow Cats, BBK 2.5"Xpipes, ZL1 Mufflers, Forgestar F14 wheels 250lb weight reduction !!!