01-26-2018, 03:46 PM | #1 |
Drives: 2011 2SS Synergy Green Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,670
|
Anyone have a set of stock strut mounts?
I bought some Bilstein coilovers and want to install them. It would be much easier if I had some stock top hats that the strut/coilover mount into. That way, I can just assemble the coilover out of the car and simply unbolt the current assembly and install the new.
Does anyone have a set of stock top hats they'd sell me?
__________________
L99 With a Maggie
|
02-04-2018, 01:57 PM | #2 |
I have a set, just took factory struts off. 50K miles, pm me an offer. I take a pic
__________________
2010 2SS M6 CGM LMR cold air, texas speed underdrive pulley and complete stainless exhaust 17/8 headers coated, comp LSR cam, push rods and trunion upgrade, norris catch can, prothane engine mounts, pfadt coilovers, BMR everything suspension, BMR four point strut, MGW billet shifter, barton pistol grip handle, AAC dome and footwell blue, all lights 25% tint, RKsport carbon inlay spoiler, powdercoated calipers, Stoptech stainless brake lines, Hawk HPS pads, West Bend Dyno tune 491rwhp and 465rwtq corrected.
|
|
02-04-2018, 02:03 PM | #3 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,436
|
I have a set of stock spring top hats that came with my Moreno Motorsports camber plates, but I won't be using them. Not sure whether that would meet your needs.
|
02-04-2018, 04:24 PM | #4 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
Advanced auto carries them
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
02-04-2018, 10:24 PM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
Fronts or rears?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-05-2018, 06:05 PM | #6 |
Drives: 2011 2SS Synergy Green Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,670
|
Fronts and rears or just the fronts
__________________
L99 With a Maggie
|
|
|
|
|