■■■■ ESS Performance Supercharger!! - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ralph@ESSTuning · 02-12-2018, 11:00 AM

Hope everyone had a great weekend! All pm's replied to

davidscamaro · 02-12-2018, 12:15 PM

You ship to Canada? , and pm price on kit with no fuel pump and fuel controller and no HP tuners, need the injectors tho .thanks

UBB · 02-15-2018, 09:52 AM

what's the promo price? I'm in the market.

Ralph@ESSTuning · 02-15-2018, 02:11 PM

Quote:

Originally Posted by UBB

what's the promo price? I'm in the market.

PM incoming

eLeSthree · 02-17-2018, 12:47 PM

Has anyone installed this kit yet? I’m trying to bolt on the ESS crank pulley and it just doesnt make sense... ive already removed my crank pulley, installed the fluidyne that comes with the kit. The Fuidyne has the AC 4 rib section at the back and the standard 6 rib pulley for the other accessories at the front. Then next step (after torquing and 140degrees) is to bolt on the ESS supercharger crank pulley with 3x 3/8 bolts. The bolts supplied dont match the threads and the ESS crank pulley has 6 ribs at the back and 10 ribs at the front. I dont need two 6 rib pulleys ontop of each other. Something is wrong here...

eLeSthree · 02-17-2018, 12:58 PM

I guess the new balancer comes with an accessory pulley already installed. Ill try to swap it out. I wish the instructions were better. Theres a lot of important info missing.

eLeSthree · 02-17-2018, 05:04 PM

Yup, gotta pull the accessory pulley off of the fluidampr in order to install the ESS crank pulley. And the suggested hardware is wrong, use the fluidampr bolts.

InTheMarket · 02-23-2018, 05:16 PM

Interested, whats the promo price?

Thanks.

eLeSthree · 02-26-2018, 10:56 AM

Kit’s installed. Just waiting on the tuner.

wane713 · 03-15-2018, 09:05 PM

If you don't mind me asking what kind of power did you get after tune?

eLeSthree · 03-18-2018, 07:50 AM

I’ll find out Monday. It’s in the good hands of Redline Motorsports at the moment. Last I remember they use a Land and Sea Dyno-Mite Dyno. Great for replicating load, not great for dyno charts.

eLeSthree · 03-19-2018, 04:10 PM

Quote:

Originally Posted by wane713

If you don't mind me asking what kind of power did you get after tune?

Well the verdict is in and all I can say is holy shit!

Got a call from Redline with some good news.

The car made 711whp and 637wtq on 10.3 psi running 93 octane.

ESSTuning Supercharger Kit (tuner) V3si head unit
Howards Cams ASA cam 226/236 525/525 110 and springs
2inch Texas Speed LT Headers
3inch exhaust no cats
TR6 @.032
DW90#
ZL1 Pump
JRE Msd Bap
Redline Motorsports tune

Land and Sea Dyno-mite Dyno.

Ill post the graph tomorrow.

mrimpala02 · 03-19-2018, 05:44 PM

Sounds about right for 10 psi! Congrats!

JANNETTYRACING · 03-20-2018, 07:31 AM

Quote:

Originally Posted by eLeSthree

Well the verdict is in and all I can say is holy shit!

Got a call from Redline with some good news.

The car made 711whp and 637wtq on 10.3 psi running 93 octane.

ESSTuning Supercharger Kit (tuner) V3si head unit
Howards Cams ASA cam 226/236 525/525 110 and springs
2inch Texas Speed LT Headers
3inch exhaust no cats
TR6 @.032
DW90#
ZL1 Pump
JRE Msd Bap
Redline Motorsports tune

Land and Sea Dyno-mite Dyno.

Ill post the graph tomorrow.

Congrats that is Stellar numbers best we have ever seen on 10.3 psi boost this kit has some seriously efficient air flow to do that.

Ted.

02-12-2018, 12:15 PM	#44
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 857	You ship to Canada? , and pm price on kit with no fuel pump and fuel controller and no HP tuners, need the injectors tho .thanks __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

02-17-2018, 12:47 PM	#47
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,905	Has anyone installed this kit yet? I’m trying to bolt on the ESS crank pulley and it just doesnt make sense... ive already removed my crank pulley, installed the fluidyne that comes with the kit. The Fuidyne has the AC 4 rib section at the back and the standard 6 rib pulley for the other accessories at the front. Then next step (after torquing and 140degrees) is to bolt on the ESS supercharger crank pulley with 3x 3/8 bolts. The bolts supplied dont match the threads and the ESS crank pulley has 6 ribs at the back and 10 ribs at the front. I dont need two 6 rib pulleys ontop of each other. Something is wrong here... __________________ 2011 Camaro SS---SOLD TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes...

02-17-2018, 12:58 PM	#48
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,905	I guess the new balancer comes with an accessory pulley already installed. Ill try to swap it out. I wish the instructions were better. Theres a lot of important info missing. __________________ 2011 Camaro SS---SOLD TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes...

02-17-2018, 05:04 PM	#49
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,905	Yup, gotta pull the accessory pulley off of the fluidampr in order to install the ESS crank pulley. And the suggested hardware is wrong, use the fluidampr bolts. __________________ 2011 Camaro SS---SOLD TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes...

02-23-2018, 05:16 PM	#50
InTheMarket Drives: 2013 Camaro 2SS Join Date: Dec 2015 Location: Tallahassee, FL Posts: 108	Interested, whats the promo price? Thanks. __________________ 2013 Camaro 2SS: Summit White-Mojave Leather Interior : K&N CAI : Pypes Bomb Axle-Back Exhaust ---------------------------------------------------

02-12-2018, 11:00 AM	#43
Ralph@ESSTuning Drives: 5th Gen Camaro SS Join Date: Sep 2017 Location: Arizona Posts: 61	Hope everyone had a great weekend! All pm's replied to

02-15-2018, 09:52 AM	#45
UBB Drives: 2018 ZL1 Join Date: Jun 2016 Location: Bismarck Posts: 572 View My Garage	what's the promo price? I'm in the market.

02-26-2018, 10:56 AM	#51
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,905	Kit’s installed. Just waiting on the tuner. Attached Images __________________ 2011 Camaro SS---SOLD TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... Last edited by eLeSthree; 02-26-2018 at 10:58 AM. Reason: suck me sideways

03-15-2018, 09:05 PM	#52
wane713 Drives: Camaro SS 1LE Join Date: May 2015 Location: Texas Posts: 52	If you don't mind me asking what kind of power did you get after tune?

03-18-2018, 07:50 AM	#53
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,905	I’ll find out Monday. It’s in the good hands of Redline Motorsports at the moment. Last I remember they use a Land and Sea Dyno-Mite Dyno. Great for replicating load, not great for dyno charts. __________________ 2011 Camaro SS---SOLD TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes...

03-19-2018, 05:44 PM	#55
mrimpala02 Drives: Black 2SS RS w/White Stripes Join Date: Mar 2011 Location: Katy, TX Posts: 775	Sounds about right for 10 psi! Congrats! __________________ 2010 2SS/RS "ChriSStine": Pat G Custom Turbo CamMotion Camshaft \| AGP TT BB Garrett 62/65's \| AGP/Fore Triple Pumps \| ID1700X Injectors \| Alky Control Twin Nozzle Meth \| Custom 3" Exhaust \| 3.27 gear set w/ Tru Trac \| McLeod Twin RXT \| Barton Short Throw Shifter \| 6th Gen ZL1 Wheels \| BMR 1.4" drop springs \| Pfadt rear trailing arms & tie rods \| Installed by Me & Tuned by Pat G