02-23-2018, 09:08 PM | #1 |
c6 zo6 wheel 18x9.5 tire size?
Hey about to get a set of c6 z06 wheels for a drag setup for the wknd, was wondering what size of drag tire i need to run to stay equivalent to the factory tire size ? thanks for any help, not very fluent in tire talk.
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
02-23-2018, 09:22 PM | #2 |
Drives: 2011 ss 2ss auto camaro Join Date: Mar 2015
Location: mary esther florida
Posts: 385
|
305/45/18 is a 28.7 tire same as stock
__________________
2011 2ss white Camaro mods are texas speed stage 4 cam 235/239 Texas speed 2inch headers no cats magna flow bullet mufflers gpi rod mod ,circle d 4000-4200 5c stall. 3.91 gears vararm cai power wedge.
|
02-23-2018, 10:15 PM | #3 |
Awesome thanks , will factory lugs work on the c6 wheels?
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
02-23-2018, 10:40 PM | #4 |
Drives: 2012 ZL1 Join Date: Jul 2017
Location: Southeast Minnesota
Posts: 118
|
I used the factory lugs on the Z06 replicas.
__________________
~ 2012 ZL1 - DynaTech 1 7/8" Headers - ID 1050 Injectors - E85 - DSX Aux Pump -
22.5% Crank Pulley - Roto-Fab CAI w/ Big Gulp- CJ/Jannetty Tuned ~ PB ET 10.54 |
02-24-2018, 07:07 AM | #5 |
Sweet that's what I was hoping! Do you have tpms in your setup? Can I just run without the sensors? Won't affect anything?
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
02-24-2018, 07:16 AM | #6 |
Drives: 2011 ss 2ss auto camaro Join Date: Mar 2015
Location: mary esther florida
Posts: 385
|
I have them but I also have a set of spare c6 zr1 wheels 18x9.5 my spares won’t have the tpms
__________________
2011 2ss white Camaro mods are texas speed stage 4 cam 235/239 Texas speed 2inch headers no cats magna flow bullet mufflers gpi rod mod ,circle d 4000-4200 5c stall. 3.91 gears vararm cai power wedge.
|
02-24-2018, 10:11 AM | #7 |
USA-1
|
How much do those weigh?
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
02-24-2018, 12:46 PM | #8 |
Drives: 2011 ss 2ss auto camaro Join Date: Mar 2015
Location: mary esther florida
Posts: 385
|
Mine weight 23 each
__________________
2011 2ss white Camaro mods are texas speed stage 4 cam 235/239 Texas speed 2inch headers no cats magna flow bullet mufflers gpi rod mod ,circle d 4000-4200 5c stall. 3.91 gears vararm cai power wedge.
|
|
|
|
|