03-17-2018, 07:32 PM | #15 |
Drives: it changes Join Date: Nov 2010
Location: Norn Iron
Posts: 1,128
|
The above just looks like the Chinese Holley intake.
|
03-17-2018, 07:47 PM | #16 |
Drives: 2014 SIM 2SS Join Date: Sep 2015
Location: Charlotte, NC
Posts: 925
|
Is this the intake white1LE has?https://www.holley.com/products/ls_p...s/parts/820102
I think the MSD intake was produced for ls1/2/6/7, but not the ls3. |
03-17-2018, 08:35 PM | #17 |
Boosted Moderator
Drives: Bone Stock LS3 Join Date: Sep 2009
Location: Marion Tx
Posts: 15,657
|
I rekunize that driveway, garage and awesome build car...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
03-21-2018, 02:43 PM | #18 |
Drives: 2010 ss Join Date: Jun 2014
Location: jackson tn
Posts: 133
|
Thanks guys Very nice car!
__________________
2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short
|
03-28-2018, 12:16 AM | #19 |
Drives: 2010 ss Join Date: Jun 2014
Location: jackson tn
Posts: 133
|
Is the pro flow the same height as the Holley??
__________________
2010ss L99 to a ls3 s480 turbo lil john cam tuned by james short
|
03-28-2018, 05:05 AM | #20 |
Drives: it changes Join Date: Nov 2010
Location: Norn Iron
Posts: 1,128
|
Holley has height in different places, but I think it's almost 2" taller than a Proflo
The cheap crap Chinese Holley fabricated intakes would be about an inch lower than ProFlo |
03-28-2018, 05:16 AM | #21 |
|
|
03-31-2018, 09:45 AM | #22 | |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
Holley
Quote:
__________________
13 ZL1 A6
LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp |
|
03-31-2018, 09:56 AM | #23 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
Holley
Yes I do have that cheap piece of crap Holley Sniper that has been on my car for 21,000 miles and pushing 21lbs of boost thru it that has not given me 1 oz of trouble in the 2 years that I've had it. Btw I have put down 1080rwhp at 23lbs thru a 6L90 but that wouldn't be nearly as drama filled as my cheap intake you pointed out. Happy cutting!!!!!!
__________________
13 ZL1 A6
LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp |
03-31-2018, 11:51 AM | #24 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Dang guys . . . . Looking SWEET!!!
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
03-31-2018, 11:54 AM | #25 | |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
Quote:
https://youtu.be/5x386q-QfMQ |
|
03-31-2018, 11:56 AM | #26 | |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
Quote:
Are they making it for LS3 cars now? Im in the market for an intake as well so that i can spin past 7000 and not lose the low end torque
__________________
Bone Stock |
|
03-31-2018, 12:00 PM | #27 | |
Drives: it changes Join Date: Nov 2010
Location: Norn Iron
Posts: 1,128
|
Quote:
Actually only just started it last night....ad the noises coming from the intake are rather disturbing. But if it helps me in the 7k+ range then I'll be happy enough. It may be cheap crap and fit rather poorly ( port alignment was terrible )...and their fuel rails have questionable fitment of o-ring fittings at each end ( the o-ring should not be squished out !! ). But it does still look cool and is a decent height to make it fit easily. |
|
03-31-2018, 07:27 PM | #28 |
Drives: 15' red hot 1le Join Date: Dec 2014
Location: Michigan....from South Texas
Posts: 94
|
To the op and anyone interested. Have you looked at the l.o.d. Speedworks intake manifold I am a technician/fabricator at a small performance shop and I’ve installed two, and on the camaro5 I installed them on they fit perfect. No cutting extremely flat surfaces and the coating looks durable. Just my 2 cents trying help the forum. Oh best part is it’s “made in the us”Hahaha being a veteran I love seeing that
Also my car is a 15 1le that I track It has a agp kit and soon e85. I will hopefully be getting one of those intakes in the future |
|
|
|
|