3.0 pulley - belt question. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SoChrisB · 04-05-2018, 08:10 AM

Does anyone know what belt I need for 3.0 pulley for new SLP blower, or is the belt I currently have for the 3.4
good to go? Thanks, guys!

Pro-tuned · 04-05-2018, 11:20 AM

Call Kris at JRE he keeps track of the belts and pulleys they do these kits often.

SS PANTHER · 04-06-2018, 03:38 AM

You’ll need a different belt. Get the JRE super tensioner also. I went from a 3.4 to a 3.

SoChrisB · 04-06-2018, 12:14 PM

Thanks guys. Appreciate it. Kris was a ton of help.

04-05-2018, 08:10 AM	#1
SoChrisB Drives: 2012 Camaro 2SS/RS Join Date: Aug 2014 Location: Rochester, NY Posts: 598 View My Garage	3.0 pulley - belt question. Does anyone know what belt I need for 3.0 pulley for new SLP blower, or is the belt I currently have for the 3.4 good to go? Thanks, guys!

04-05-2018, 11:20 AM	#2
Pro-tuned Angewendet Ingenieur Drives: 14 Camaro ZL1 Join Date: Apr 2015 Location: USA Posts: 401	Call Kris at JRE he keeps track of the belts and pulleys they do these kits often. __________________ ———— LQ9, Iron Block, Forged internals, 408CI, Jannetty custom cam, TS short block, Whipple, Hardened Jackshaft, PRC 260, 2X3 Dynatech Full Competition, HF Cats, CAI, NW 103, Chee, ID 1300, COPO Breather, MSD, Fore Dual Pump, ultratorque, E85, dual Meth, True Trac, 3:45, 1500hp axle-shafts, DSS CF, BMR, custom Pearl/Candy paint by Jaidah.

04-06-2018, 03:38 AM	#3
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,713	You’ll need a different belt. Get the JRE super tensioner also. I went from a 3.4 to a 3.

04-06-2018, 12:14 PM	#4
SoChrisB Drives: 2012 Camaro 2SS/RS Join Date: Aug 2014 Location: Rochester, NY Posts: 598 View My Garage	Thanks guys. Appreciate it. Kris was a ton of help.