You are browsing camaro5 
 |
|
04-14-2018, 08:06 PM
|
#1 |
 Drives: 2014 Camaro SS Join Date: Sep 2017
Location: San Antonio
Posts: 5
|
will stock zl1 hood fit camaro ss
I found a few complete hoods for the zl1 for sale by someone
will it fit a 2014 camaro ss I've seen the aftermarket ones work just fine but will the stock zl1 hood fit |
|
|
|
04-14-2018, 09:36 PM
|
#2 |
 
|
yes, its will fit. The only problem is the lines on the nose will not line up.
__________________
2011 Camaro SS
1999 Camaro SS 1969 Camaro http://www.fquick.com/csmith4153 https://www.youtube.com/channel/UCKH...lQFJSUtgrNEY7w |
|
|
|
|
04-14-2018, 10:35 PM
|
#3 |
        
Drives: 2013 SS Supercharged Convertible Join Date: May 2013
Location: SoCal
Posts: 2,713
|
You can see the lines like Csmith mentioned in this pic. Not that noticeable on black. It doesn’t bother me. I had to remove the drip tray though due to my pd blower.
|
|
|
|
|
04-14-2018, 10:42 PM
|
#4 |
|
Drives: 2013 SS Supercharged Convertible Join Date: May 2013
Location: SoCal
Posts: 2,713
|
You have a 2014 so it may align differently.
|
|
|
|
|
04-15-2018, 09:21 PM
|
#5 |
 Drives: 2015 1LE Camaro Join Date: Apr 2015
Location: San Diego
Posts: 88
|
The lines wont match up on a 2014/15 either but i dont think its obvious. Also, I remember reading one poster saying the water tray/drip pan on a zl1 hood hit something with his SS (I dont know which year) but he got around it
|
|
|
|
|
04-15-2018, 09:48 PM
|
#6 |
  
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,620
|
All the more reason to do the ZL1 bumper swap too!
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
|
|
 |
| Tags |
| 2014 camaro ss, zl1 hood |
|
|
