Stainless Works retro Catback Muffler removal? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TRC-SS · 02-25-2018, 11:21 AM

This is probably a no....But has anyone removed say 2 of the 4 mufflers that come with the Retro Chambered Catback?

System has the x pipe then 2 mufflers then pipe to back where there is 2 more mufflers.

Not sure it would do anything but those mufflers are pretty constrictive in the center.

libb46 · 02-25-2018, 11:37 AM

was thinking of doing the same thing. I picked up 2 pieces of straight pipe

TRC-SS · 02-25-2018, 11:52 AM

Quote:

Originally Posted by libb46

was thinking of doing the same thing. I picked up 2 pieces of straight pipe

I guess the worst thing is we put the muffler back in ! haha

I Just figured with my fully built motor/cammed/supercharged releasing some more airflow would help

Abelardoo_12 · 02-25-2018, 07:38 PM

I was also thinking about this, i went from 2.5 straight pipe to this hoping it would be louder but felt like it was quieter

TRC-SS · 04-26-2018, 07:48 PM

well to bump this up I've set an appointment for this coming monday to remove the 2 center mufflers. If it doesn't make much of a difference ill remove all 4!!!

jc615 · 04-26-2018, 08:22 PM

Keep us posted

rontammy0 · 04-26-2018, 08:57 PM

I cant believe its that narrow. Wonder if the muffler at the back are that restrictive.....if so how is this exhaust an improvement over stock.

Abelardoo_12 · 04-27-2018, 10:57 AM

I did these last weekend and replaced with straight pipe the two in the middle and left the rear ones on. The tone did change a little and it got a little louder. Im not sure how it’ll affect you since you have way more power but I did cut into one of the mufflers and there’s actually another pipe inside of it which of course has to be smaller than 3 inches so that miffler is not really a 3 inch, its more like a 2.5 plus the wierd things that it has on the inside so take that into consideration also. I also did try it with straight pipe all the way and it was extremely loud

TRC-SS · 04-27-2018, 12:04 PM

Quote:

Originally Posted by Abelardoo_12

I did these last weekend and replaced with straight pipe the two in the middle and left the rear ones on. The tone did change a little and it got a little louder. Im not sure how it’ll affect you since you have way more power but I did cut into one of the mufflers and there’s actually another pipe inside of it which of course has to be smaller than 3 inches so that miffler is not really a 3 inch, its more like a 2.5 plus the wierd things that it has on the inside so take that into consideration also. I also did try it with straight pipe all the way and it was extremely loud

Thanks for the input! Im hoping for a bit more bark at idle. I have QTP cutouts right behind the headers so thats my extreme loud when i want it to be. So if your saying its loud with all 4 gone ill probably stick with removing just the 2. Im sure mines going to louder cause long tubes and no cats with supercharged and cammed car. we shall see

TRC-SS · 04-27-2018, 12:05 PM

Quote:

Originally Posted by rontammy0

I cant believe its that narrow. Wonder if the muffler at the back are that restrictive.....if so how is this exhaust an improvement over stock.

Yea all 4 mufflers on this system are the same. It now explains why i gain 11 HP on a dyno when i have my cutouts open. (mounted where the cats should be)

0331Marine · 04-27-2018, 01:22 PM

Just checked mine because I'm going single turbo and mine looks nothing like that.

weSS1LEy · 04-27-2018, 08:43 PM

They make one for the zl1 quad tips without the rear mufflers. Serial number ends in lmf. They must have this option for ss no? Also I think think mufflers are reversible too so the louvres face toward the rear.

sinisterlsx510 · 04-27-2018, 09:03 PM

I wonder how similar its to the gmmg catback on old 4th genz

Abelardoo_12 · 04-27-2018, 09:18 PM

Quote:

Originally Posted by TRC-SS

Thanks for the input! Im hoping for a bit more bark at idle. I have QTP cutouts right behind the headers so thats my extreme loud when i want it to be. So if your saying its loud with all 4 gone ill probably stick with removing just the 2. Im sure mines going to louder cause long tubes and no cats with supercharged and cammed car. we shall see

Yeah I have no cats and cammed as well and with straight pipe all the way it sounded close to when i had 2.5 cutouts

02-25-2018, 11:21 AM	#1
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Stainless Works retro Catback Muffler removal? This is probably a no....But has anyone removed say 2 of the 4 mufflers that come with the Retro Chambered Catback? System has the x pipe then 2 mufflers then pipe to back where there is 2 more mufflers. Not sure it would do anything but those mufflers are pretty constrictive in the center. __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

04-26-2018, 07:48 PM	#5
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	well to bump this up I've set an appointment for this coming monday to remove the 2 center mufflers. If it doesn't make much of a difference ill remove all 4!!! __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

04-27-2018, 08:43 PM	#12
weSS1LEy weSS1LEy Drives: 2015 camaro 2ss/rs/1le Join Date: Sep 2015 Location: Kelowna Posts: 510	They make one for the zl1 quad tips without the rear mufflers. Serial number ends in lmf. They must have this option for ss no? Also I think think mufflers are reversible too so the louvres face toward the rear. __________________ Rotofab, arh no cats, atak, elite cc, 94 octane tune, Mobil 1, phastek scoop, custom cam 230/243 .621 .604 114+4, related cam kit stuff. 470/435 rwhp/rwtq

04-27-2018, 09:03 PM	#13
sinisterlsx510 Drives: 14 ss camaro summit white Join Date: Oct 2014 Location: bay area Posts: 463	I wonder how similar its to the gmmg catback on old 4th genz __________________ 2014 ss camaro Stainless works long tubes , rotofab cai , vararam wedge , muffler delete,cat delete ,resonator delete , x pipe 2019 sierra duramax 2500 all terrain x 2001 trans am Lsx 408 ci rebuild in progress(dead project) 1967 camaro Sbc 327.

02-25-2018, 11:37 AM	#2
libb46 Drives: 2015 2SS 1LE Join Date: Feb 2016 Location: Plainville CT Posts: 29	was thinking of doing the same thing. I picked up 2 pieces of straight pipe

02-25-2018, 07:38 PM	#4
Abelardoo_12 Drives: 2011 camaro ss convertible Join Date: Oct 2015 Location: Houston, tx Posts: 421	I was also thinking about this, i went from 2.5 straight pipe to this hoping it would be louder but felt like it was quieter

04-26-2018, 08:22 PM	#6
jc615 Account Suspended Drives: Camaro and Sierra Join Date: Jul 2012 Location: Virginia Posts: 794	Keep us posted

04-26-2018, 08:57 PM	#7
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	I cant believe its that narrow. Wonder if the muffler at the back are that restrictive.....if so how is this exhaust an improvement over stock.

04-27-2018, 10:57 AM	#8
Abelardoo_12 Drives: 2011 camaro ss convertible Join Date: Oct 2015 Location: Houston, tx Posts: 421	I did these last weekend and replaced with straight pipe the two in the middle and left the rear ones on. The tone did change a little and it got a little louder. Im not sure how it’ll affect you since you have way more power but I did cut into one of the mufflers and there’s actually another pipe inside of it which of course has to be smaller than 3 inches so that miffler is not really a 3 inch, its more like a 2.5 plus the wierd things that it has on the inside so take that into consideration also. I also did try it with straight pipe all the way and it was extremely loud

04-27-2018, 01:22 PM	#11
0331Marine Drives: 2012 SS/RS MN6 Join Date: Mar 2016 Location: Covington Ga Posts: 783	Just checked mine because I'm going single turbo and mine looks nothing like that.