05-02-2018, 05:49 PM | #1 |
Drives: 2011 Camaro SS Join Date: Nov 2014
Location: SC
Posts: 116
|
Help with C-Tap install
I am trying to install the clutch position switch harness from lingenfelter and I can't figure out how to unclip the safety pins. I read a thread awhile back and now I cant find it... Stupid me should have book marked it. I tried messing with the one on the break pedal for practice.
|
05-02-2018, 06:01 PM | #2 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
|
05-02-2018, 06:14 PM | #3 |
Drives: 2011 Camaro SS Join Date: Nov 2014
Location: SC
Posts: 116
|
exactly that one thanks.
|
05-02-2018, 06:44 PM | #4 |
Drives: 2011 Camaro SS Join Date: Nov 2014
Location: SC
Posts: 116
|
this thing is a pain..
|
05-02-2018, 08:13 PM | #5 |
Drives: 2011 Camaro SS Join Date: Nov 2014
Location: SC
Posts: 116
|
believe it or not I was able to install it just now by not even getting in the car. knees on the ground and I was able to locate the lock and I decided to just give it some force. Got the lock off. then had to take pics of the connector to realize after that you just press and pull... Honestly I think I could do it again in 10 min now that I know how it works.
|
05-02-2018, 08:16 PM | #6 |
Drives: 2011 Camaro SS Join Date: Nov 2014
Location: SC
Posts: 116
|
|
05-03-2018, 05:44 AM | #7 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
Awesome!
I have the adapter piece too but I skipped using it. I have an N2MB Wotbox installed and just T'ed into the clutch wire for it after I realized what a pain it was going to be to install the adapter. |
|
|
|
|