What Did You Do To Your Camaro Today? - Page 1518 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

George-CZ · 06-13-2018, 04:42 AM

Quote:

Originally Posted by Welker2

Actually, order the louvers the other night after seeing the ones SummitWhite11 had installed. When I showed them to my wife and told her I was thinking of ordering them, she said, 'good, didn't know what to get you for Father's day, hope you like them.' They came last night and I installed them this morning; took less then 30 minutes from start to finish, including washing/prepping the rear window.

Look very nice. But every time I see the louvers, I ask myself how the window is washed..?

Welker2 · 06-13-2018, 09:35 AM

Quote:

Originally Posted by George-CZ

Look very nice. But every time I see the louvers, I ask myself how the window is washed..?

There are 8 brackets that adhere to the rear window, two along each edge, that have threaded studs sticking up. These studs go through holes in the louvers and 'caps' are screwed on to hold the louvers in place (2 are circled in red in pic below). When you wash the car/window, you simply unscrew the caps & remove the louvers.

WoodBoss · 06-13-2018, 10:30 AM

Installed a Phastek Race Scoop To Feed The Roto-Fab Cold Air Intake. I made a video of the process, link below................

https://youtu.be/CfooK3IOylA

George-CZ · 06-13-2018, 03:11 PM

Quote:

Originally Posted by Welker2

There are 8 brackets that adhere to the rear window, two along each edge, that have threaded studs sticking up. These studs go through holes in the louvers and 'caps' are screwed on to hold the louvers in place (2 are circled in red in pic below). When you wash the car/window, you simply unscrew the caps & remove the louvers.

Well, thank you so much

Now, I need you too.
Complicated window cleaning has discouraged me from buying

Rock-It Man · 06-14-2018, 04:45 PM

Finally replaced the cabin air filter!

Don't be a dummy like me and wait 9 years to do it. Smells fresher immediately.

00 Z/28 · 06-14-2018, 10:40 PM

Well Tuesday I got to take a couple laps around AMS; which was pretty awesome.

Then today the big brown truck showed up and I got to work

DvKillar · 06-15-2018, 09:35 AM

LUCKY!!!

Mr2Hard2See · 06-15-2018, 11:13 AM

Just a simple task I haven't completed but it's been on my mind to snap a pic of my Chevy lineup and almost pulled it off minus my Chevy truck in this pic

PACamaro85 · 06-15-2018, 01:45 PM

Is that a Monte Carlo on the right? What year? Reminds me of the 5th gen design.

BAD DAB · 06-15-2018, 05:37 PM

Replaced my factory speakers and amp. Great improvement!

Mr2Hard2See · 06-15-2018, 09:39 PM

Quote:

Originally Posted by PACamaro85

Is that a Monte Carlo on the right? What year? Reminds me of the 5th gen design.

Yes, real SS MONTE CARLO 1986. 6pt cage posi 373's disc break rearend etc.

I noticed the 5th gen styling as well. I should do a 2.0 build make a bumblebee gbody with 5gen goodies

Mike14bumblebee · 06-17-2018, 10:29 PM

Got the car back from having speed engineering headers installed with custom cats. Paired with my Borla ATAK, man this thing screams when I get on it. 😃

Athletics101 · 06-17-2018, 11:13 PM

I have kooks headers/off road pipes and borlas and it sounds amazing as well

Mr2Hard2See · 06-18-2018, 03:40 AM

Quote:

Originally Posted by Mike14bumblebee

Got the car back from having speed engineering headers installed with custom cats. Paired with my Borla ATAK, man this thing screams when I get on it. ��

How was the quality of them out of the box? I realized you didn't install so you may not know the troubles for fitment issues but did the shop say anything about that. I want LT's and that price is right.

06-14-2018, 10:40 PM	#21244
00 Z/28 Drives: 2011 Camaro SS/RS Join Date: Jun 2016 Location: Atlanta, GA Posts: 182	Well Tuesday I got to take a couple laps around AMS; which was pretty awesome. Then today the big brown truck showed up and I got to work __________________ 2011 SIM 2SS/RS L99/A6, Rotofab CAI, TSP LTs & hi-flows, SW Retro catback, BMR & Hotchkis goodies, MRR 017s & Nitto 555G2s

06-15-2018, 11:13 AM	#21246
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	Just a simple task I haven't completed but it's been on my mind to snap a pic of my Chevy lineup and almost pulled it off minus my Chevy truck in this pic Attached Images __________________ YOUTUBE CHANNEL: Mr2Hard2See LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers

06-15-2018, 05:37 PM	#21248
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,230 View My Garage	Replaced my factory speakers and amp. Great improvement! Attached Images __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

06-17-2018, 10:29 PM	#21250
Mike14bumblebee Drives: 2014 yellow 2SS/RS Join Date: Apr 2015 Location: Stoney Creek, Ontario Posts: 488 View My Garage	Got the car back from having speed engineering headers installed with custom cats. Paired with my Borla ATAK, man this thing screams when I get on it. 😃 __________________ K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

06-13-2018, 10:30 AM	#21241
WoodBoss "Old School" Drives: 2010 2SS L99 Join Date: Apr 2015 Location: Sherrills Ford, NC Posts: 1,294	Installed a Phastek Race Scoop To Feed The Roto-Fab Cold Air Intake. I made a video of the process, link below................ https://youtu.be/CfooK3IOylA

06-14-2018, 04:45 PM	#21243
Rock-It Man 376 cubic inches of fun Drives: 2023 Camaro ZL1 A10 Join Date: Jul 2010 Location: MA Posts: 4,043 View My Garage	Finally replaced the cabin air filter! Don't be a dummy like me and wait 9 years to do it. Smells fresher immediately.

06-15-2018, 09:35 AM	#21245
DvKillar Drives: 2015 Chevy Camaro 2LS Join Date: May 2017 Location: MWC, OK Posts: 815	LUCKY!!!

06-15-2018, 01:45 PM	#21247
PACamaro85 Drives: 2014 + 2023 Camaro 1SS 1LE Join Date: Feb 2018 Location: Toronto Posts: 68	Is that a Monte Carlo on the right? What year? Reminds me of the 5th gen design.

06-17-2018, 11:13 PM	#21251
Athletics101 Drives: 5th Gen L99 Join Date: Nov 2017 Location: Lake Havasu City Posts: 244	I have kooks headers/off road pipes and borlas and it sounds amazing as well