Fresh rebuilt L33 for boost - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2muchboost · 04-19-2018, 12:00 PM

CONTACT INFORMATION:
NAME: Herb Santos
LOCATION: San Antonio, TX
Cell (Text Only Plz): 631.836.5927 (best way to reach me)
PAYMENT OPTIONS: Cash or Cash + 6.2 Bare Block
PRICE: See Below
SHIPPING: Not on the block at this time

L33: Price $1950 FIRM

L33 bored 0.020 over: Aluminum 5.3s that make over 800+rwhp in stock form.
24x Reluctor and polished crank
New stock 0.020 over bore pistons
Gen 4 Rods with ARP Bolts
Total Seal Steel Piston Rings gapped for 24-28 lbs: $250 rings
Stage 2 BTR Turbo Cam
LS2 Timing Chain Set with Damper
LS7 Lifters and Trays
Manton 11/32 120 Wall 7.4 Pushrods
317 Heads Milled 0.23 (9.6:1 compression if memory serves me correct)
BTR Dual Valve Spring Kit
ARP Head Bolts
Ported Melling 295 Oil Pump
Stock Rocker Arms
Stock Valve Covers
New Knock Sensors
All Engine Sensors
All Engine Covers

Bought off a fellow LSX member in Austin in December 2017. Machine work done by a shop in Central TX but the name escapes me at the moment. Only reason I am selling is because Uncle Sam gave me the shaft this year with taxes. I fought the case aggressively but got my notice on Friday that I am still screwed. I would rather this not sit in my garage as it may be a while before I can get back to the build. Everything is new with the exception of the block, crank, and heads. Similar setups have seen 800+rwhp all day.

If you are in TX and a reasonable distance, I may be able to travel to you but we can work out the details when you reach out. If you have a bare 6.2 block or 6.2 shortblock we can work that into the price.

2muchboost · 05-01-2018, 12:42 PM

Shipping quote ranges from $200-250 depending on location through Fastenal.

caper · 05-01-2018, 05:28 PM

Stock pistons?

2muchboost · 05-03-2018, 02:11 PM

Yes sir stock replacement pistons. Stock rods with ARP hardware as well. I am sure you are well aware how capable these little beasts are even in stock form. Was just looking at Capazzi's setup with the L33....spinning these puppies to 8k rpm is insane lol.

2muchboost · 05-21-2018, 11:48 AM

New firm price is $1950. Can ship out via Fastenal.

ozzy1le · 05-21-2018, 01:46 PM

Great price. Wish I was closer and ready. I have an lm7 in my turbo silverado that it would be perfect for.

04-19-2018, 12:00 PM	#1
2muchboost Drives: Nissan Join Date: Apr 2017 Location: Austin Posts: 6	Fresh rebuilt L33 for boost CONTACT INFORMATION: NAME: Herb Santos LOCATION: San Antonio, TX Cell (Text Only Plz): 631.836.5927 (best way to reach me) PAYMENT OPTIONS: Cash or Cash + 6.2 Bare Block PRICE: See Below SHIPPING: Not on the block at this time L33: Price $1950 FIRM L33 bored 0.020 over: Aluminum 5.3s that make over 800+rwhp in stock form. 24x Reluctor and polished crank New stock 0.020 over bore pistons Gen 4 Rods with ARP Bolts Total Seal Steel Piston Rings gapped for 24-28 lbs: $250 rings Stage 2 BTR Turbo Cam LS2 Timing Chain Set with Damper LS7 Lifters and Trays Manton 11/32 120 Wall 7.4 Pushrods 317 Heads Milled 0.23 (9.6:1 compression if memory serves me correct) BTR Dual Valve Spring Kit ARP Head Bolts Ported Melling 295 Oil Pump Stock Rocker Arms Stock Valve Covers New Knock Sensors All Engine Sensors All Engine Covers Bought off a fellow LSX member in Austin in December 2017. Machine work done by a shop in Central TX but the name escapes me at the moment. Only reason I am selling is because Uncle Sam gave me the shaft this year with taxes. I fought the case aggressively but got my notice on Friday that I am still screwed. I would rather this not sit in my garage as it may be a while before I can get back to the build. Everything is new with the exception of the block, crank, and heads. Similar setups have seen 800+rwhp all day. If you are in TX and a reasonable distance, I may be able to travel to you but we can work out the details when you reach out. If you have a bare 6.2 block or 6.2 shortblock we can work that into the price. Last edited by 2muchboost; 05-21-2018 at 11:47 AM.

05-01-2018, 05:28 PM	#3
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	Stock pistons? __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

05-01-2018, 12:42 PM	#2
2muchboost Drives: Nissan Join Date: Apr 2017 Location: Austin Posts: 6	Shipping quote ranges from $200-250 depending on location through Fastenal.

05-03-2018, 02:11 PM	#4
2muchboost Drives: Nissan Join Date: Apr 2017 Location: Austin Posts: 6	Yes sir stock replacement pistons. Stock rods with ARP hardware as well. I am sure you are well aware how capable these little beasts are even in stock form. Was just looking at Capazzi's setup with the L33....spinning these puppies to 8k rpm is insane lol.

05-21-2018, 11:48 AM	#5
2muchboost Drives: Nissan Join Date: Apr 2017 Location: Austin Posts: 6	New firm price is $1950. Can ship out via Fastenal.

05-21-2018, 01:46 PM	#6
ozzy1le Drives: 2015 camaro 1le Join Date: Jun 2015 Location: pasco wa Posts: 233	Great price. Wish I was closer and ready. I have an lm7 in my turbo silverado that it would be perfect for.