E-Force new lid height - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bonecrrusher · 07-30-2018, 01:51 PM

Hello everyone - I am looking at the updated E-Force lid for my LS3 build.

Does anyone have a height measurement of the new style lid?

I have the old lid currently - got a taller hood - and have more room now.

FYI - this isn't for a Camaro - but I have found several great threads on Camaro5 about the E-Force and figured I'd ask here for the help.

Thanks!

1LEJNG · 07-30-2018, 10:18 PM

I have the new style on my 14 1LE. It fits under the strut brace with no problem. It was so close though I machined some spacers to raise the bar about 1/4 inch. I don't know what you are putting it on but I bet you wont need a taller hood.

COBARO1 · 07-30-2018, 11:12 PM

Quote:

Originally Posted by bonecrrusher

Hello everyone - I am looking at the updated E-Force lid for my LS3 build.

Does anyone have a height measurement of the new style lid?

I have the old lid currently - got a taller hood - and have more room now.

FYI - this isn't for a Camaro - but I have found several great threads on Camaro5 about the E-Force and figured I'd ask here for the help.

Thanks!

Or you could get the edelbrock crap logo machined off, have lid ceramic caoted for heat resistence and add a phenolic spacer (1 inch)

1LEJNG · 07-31-2018, 04:45 PM

The new onds dont have a logo on top.

oachalon · 08-02-2018, 09:52 PM

Have you noticed any changes by adding the phenolic spacer?

COBARO1 · 08-02-2018, 10:12 PM

Quote:

Originally Posted by oachalon

Have you noticed any changes by adding the phenolic spacer?

Lowered IAT's about 10 degrees across the board.

oachalon · 08-03-2018, 11:04 AM

Interesting. Did you just do it on the cover, or did you add them between the supercharger and the heads?

COBARO1 · 08-03-2018, 11:35 PM

Quote:

Originally Posted by oachalon

Interesting. Did you just do it on the cover, or did you add them between the supercharger and the heads?

Between both the heads and the supercharger. Kinda like a phenolic sandwich. LOL. After that I installed a interchiller which significantly reduced IAT's.

bonecrrusher · 08-05-2018, 02:09 AM

How much was the lid spacer?

COBARO1 · 08-06-2018, 08:47 AM

Quote:

Originally Posted by bonecrrusher

How much was the lid spacer?

I had it made at work on CNC machine. Material was about $275. 1" phenolic. I put lowered motor mounts on to fit everything under the hood.

DIALD_SOCAL_C6 · 02-18-2022, 10:08 AM

Quote:

Originally Posted by COBARO1

Or you could get the edelbrock crap logo machined off, have lid ceramic caoted for heat resistence and add a phenolic spacer (1 inch)

I see you are in Menifee. I'm in Murrieta. How can I get my hands on one of those spacers?

07-30-2018, 01:51 PM	#1
bonecrrusher Drives: 2014 Chevy SS 2005 Corvette Join Date: Sep 2016 Location: Charlotte, NC Posts: 5	E-Force new lid height Hello everyone - I am looking at the updated E-Force lid for my LS3 build. Does anyone have a height measurement of the new style lid? I have the old lid currently - got a taller hood - and have more room now. FYI - this isn't for a Camaro - but I have found several great threads on Camaro5 about the E-Force and figured I'd ask here for the help. Thanks!

07-30-2018, 10:18 PM	#2
1LEJNG Drives: Red Hot 2014 1LE Join Date: Feb 2016 Location: Minneapolis Posts: 234 View My Garage	E-Force I have the new style on my 14 1LE. It fits under the strut brace with no problem. It was so close though I machined some spacers to raise the bar about 1/4 inch. I don't know what you are putting it on but I bet you wont need a taller hood.

07-31-2018, 04:45 PM	#4
1LEJNG Drives: Red Hot 2014 1LE Join Date: Feb 2016 Location: Minneapolis Posts: 234 View My Garage	Eforce The new onds dont have a logo on top.

08-02-2018, 09:52 PM	#5
oachalon Drives: 2010 Camaro 1SS Join Date: Mar 2009 Location: Mentor, Ohio Posts: 999 View My Garage	Have you noticed any changes by adding the phenolic spacer? __________________ 2010 1SS/RS LS3 M6 Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno.

08-03-2018, 11:04 AM	#7
oachalon Drives: 2010 Camaro 1SS Join Date: Mar 2009 Location: Mentor, Ohio Posts: 999 View My Garage	Interesting. Did you just do it on the cover, or did you add them between the supercharger and the heads? __________________ 2010 1SS/RS LS3 M6 Edelbrock E-Force Supercharger, 3.00" Pulley, Roto-Fab CAI, Stainless Power LT Headers, LPE Dual Fuel Pump, ID850's, Custom Grind Cam, Katzkin Leather/Suede Interior 630RWHP mustang dyno.

08-05-2018, 02:09 AM	#9
bonecrrusher Drives: 2014 Chevy SS 2005 Corvette Join Date: Sep 2016 Location: Charlotte, NC Posts: 5	How much was the lid spacer?