What Did You Do To Your Camaro Today? - Page 1543 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Welker2 · 10-11-2018, 11:51 AM

As most other's were getting ready to go or on their way to work on a stormy morning (here), with coffee in hand, I made my way to the garage, turned on some music, started detailing my Camaro and thought how great retirement and life is.

Taylortoons · 10-11-2018, 12:53 PM

Don’t forget your fender wells. I pull the wheels one at a time to make it easier to clean. When I have the time, of course...

Welker2 · 10-11-2018, 01:12 PM

Quote:

Originally Posted by Taylortoons

Don’t forget your fender wells. I pull the wheels one at a time to make it easier to clean. When I have the time, of course...

Plan on doing them and a few other things I couldn't get to this morning once this little storm passes and I can put the Corvette in the driveway to make more room .. hopefully tomorrow morning.

15RS2NV · 10-11-2018, 07:50 PM

Continued polishing (the same spot) on my valve covers. Came to a point where that spot started to shine. Not a lot, but it was definitely reflecting. Moved to the next opening and started polishing that spot.

Only stopped because the rain started.

LS/V6 · 10-11-2018, 10:46 PM

Got it dyno tuned FINALLY! Here's a video. (don't mind the water mark)

Dusk_2SS · 10-12-2018, 12:54 AM

Nice! Would love to tune mine but I have 5.5 years more warranty.

Welker2 · 10-12-2018, 12:29 PM

Got up early, filled a travel mug with coffee and drove it out to watch the sunrise over our little city .. life doesn't get any better

George-CZ · 10-12-2018, 01:24 PM

After a long time drove. It's a shame that it's not manual transmissíon.

Spec · 10-12-2018, 01:34 PM

Quote:

Originally Posted by Welker2

Got up early, filled a travel mug with coffee and drove it out to watch the sunrise over our little city .. life doesn't get any better

Sweet shots, Welker2!

Welker2 · 10-12-2018, 02:23 PM

Quote:

Originally Posted by Spec

Sweet shots, Welker2!

Think you; I'm not the best at taking pictures, but I get lucky every now and then and was really happy with how some of these came out.

Mr2Hard2See · 10-12-2018, 10:45 PM

Got my strut tower brace covers, billet oil cap and carbon fibber radiator cover installed. Just a few more little odd balls to get then I can start to add some fresh paint under the hood. I’m happy every time I look under the hood now

Joecruiser · 10-12-2018, 11:30 PM

Beautiful cars!

Welker, awesome pics. I'm retired too...or shall I say was for 2 1/2 months after 30 years of service for a local municipality.

I'm returning to work this coming Monday, part time.
BTW, I was in your state in August. I have friends in Vegas. Walked up to see the Pat Tilman memorial and on to the bridge to scope out the Hoover Dam.

I say walked up because for those that have never been, you have to climb like 10 flights of stairs

Joecruiser · 10-12-2018, 11:34 PM

Youngdeezy, what's under your hood is a work of art...absolutely gorgeous!

Joecruiser · 10-12-2018, 11:48 PM

Since I’ve posted a few comments I’ll post what I did today..
Installed a license plate frame from the college my youngest boy is attending

10-11-2018, 11:51 AM	#21589
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	As most other's were getting ready to go or on their way to work on a stormy morning (here), with coffee in hand, I made my way to the garage, turned on some music, started detailing my Camaro and thought how great retirement and life is. Attached Images __________________

10-11-2018, 12:53 PM	#21590
Taylortoons Drives: 2011 2SS/RS LS3 Join Date: Apr 2017 Location: Dallas Posts: 482	Don’t forget your fender wells. I pull the wheels one at a time to make it easier to clean. When I have the time, of course... __________________ GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD

10-11-2018, 07:50 PM	#21592
15RS2NV Ponies are for girls Drives: 2015 RS LFX Red Hot A6 Join Date: Sep 2018 Location: Southern AZ Posts: 315 View My Garage	Continued polishing (the same spot) on my valve covers. Came to a point where that spot started to shine. Not a lot, but it was definitely reflecting. Moved to the next opening and started polishing that spot. Only stopped because the rain started. __________________ H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro

10-12-2018, 12:54 AM	#21594
Dusk_2SS Drives: 2013 Dusk Special Edition 2SS/RS Join Date: May 2017 Location: Tacoma WA Posts: 129 View My Garage	Nice! Would love to tune mine but I have 5.5 years more warranty. __________________

10-12-2018, 12:29 PM	#21595
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Got up early, filled a travel mug with coffee and drove it out to watch the sunrise over our little city .. life doesn't get any better Attached Images __________________

10-12-2018, 01:24 PM	#21596
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,611	After a long time drove. It's a shame that it's not manual transmissíon.

10-12-2018, 10:45 PM	#21599
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	Got my strut tower brace covers, billet oil cap and carbon fibber radiator cover installed. Just a few more little odd balls to get then I can start to add some fresh paint under the hood. I’m happy every time I look under the hood now Attached Images __________________ YOUTUBE CHANNEL: Mr2Hard2See LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers

10-12-2018, 11:30 PM	#21600
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Beautiful cars! Welker, awesome pics. I'm retired too...or shall I say was for 2 1/2 months after 30 years of service for a local municipality. I'm returning to work this coming Monday, part time. BTW, I was in your state in August. I have friends in Vegas. Walked up to see the Pat Tilman memorial and on to the bridge to scope out the Hoover Dam. I say walked up because for those that have never been, you have to climb like 10 flights of stairs

10-12-2018, 11:34 PM	#21601
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Youngdeezy, what's under your hood is a work of art...absolutely gorgeous!

10-12-2018, 11:48 PM	#21602
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Since I’ve posted a few comments I’ll post what I did today.. Installed a license plate frame from the college my youngest boy is attending Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM