What Did You Do To Your Camaro Today?

[zlathim]

I removed and cleaned the throttle body on my 2010 SS M6. It seems to have cleaned up the choppy idle that I had.

[bdubz]

Originally Posted by Youngdeezy510

Finally instead my LT headers. Car sounds great and all I need to do is get a tune from dyno Steve now. I asked a good local street mechanic for headers install and he said $400. Then I went to a real shop they said $700 for install so that’s the reason I did them myself

Nice! Doing it your self is the way to go if you can handle it. I plan on doing my own LT headers when I buy some. How was the install?

[Mr2Hard2See]

Originally Posted by bdubz

Nice! Doing it your self is the way to go if you can handle it. I plan on doing my own LT headers when I buy some. How was the install?

More hassle than doing sbc LT install but doable. Just make sure you have a buddy on stand by to help with the gaskets and bolts while you support the headers underneath the car. Overall it’s the best mod I’ve done so far.

[Spec]

Originally Posted by zlathim

I removed and cleaned the throttle body on my 2010 SS M6. It seems to have cleaned up the choppy idle that I had.

Yep, clean it often. Helps to keep the throttle responsive too. Always make it a habit to clean out the TB when I clean out the Air Filter.

[Royal Tiger]

Had the Koni yellow shocks & struts put on, BMR springs, trailing arms & toe links, BMR strut tower brace, and removed the gold bow tie and small red SS for a large white SS. Heritage grill goes on next week.

[Royal Tiger]

See if anyone picks up what else was added to the rear.....

[Nb1081]

Originally Posted by Royal Tiger

See if anyone picks up what else was added to the rear.....

The police interceptor badge?

[Royal Tiger]

Originally Posted by Nb1081

The police interceptor badge?

Yep.

I guess I should have waited to see if anyone spotted it first.

[SSEssence]

Royal Tiger ride is looking great brother, and what a garage mate!

[Royal Tiger]

Originally Posted by SSEssence

Royal Tiger ride is looking great brother, and what a garage mate!

That’s my buddies house. Middle bay is a lift. I’ll have to get some underside pics next week. Should be doing the new rotors and pads along with the subframe connectors and drive shaft tunnel brace. We already painted the heritage grill. That will go on first. Car looks killer from the back with the 315’s!

[Royal Tiger]

Here’s another pic:

[BowlingSS]

Originally Posted by bdubz

Nice! Doing it your self is the way to go if you can handle it. I plan on doing my own LT headers when I buy some. How was the install?

I did mine by myself. It is a lot easier than the 4th gen. Not bad at all. The O2 sensors were the hardest getting out.

Bill

[bdubz]

Originally Posted by BowlingSS

I did mine by myself. It is a lot easier than the 4th gen. Not bad at all. The O2 sensors were the hardest getting out.

Bill

Thanks Bill!

[bdubz]

Originally Posted by Youngdeezy510

More hassle than doing sbc LT install but doable. Just make sure you have a buddy on stand by to help with the gaskets and bolts while you support the headers underneath the car. Overall it’s the best mod I’ve done so far.

Thanks for the info!