09-14-2018, 07:34 AM | #1 |
Drives: 1992 LS3 Typhoon Join Date: Jul 2017
Location: Michigan
Posts: 60
|
Coil Pack Relocation Question
It may be a dumb question but I’ll ask anyway. I want to make the engine bay as clean as possible and the coils are an eye sore. My question is - how far can the coils packs move w/o affecting spark/performance on a high HP build? I know I will need extensions and plug wires but can I move them 2’, 3’, 6’, etc?
|
09-14-2018, 09:25 AM | #2 | |
Drives: 2015 1LE Join Date: Oct 2015
Location: Cleveland, OH
Posts: 1,485
|
Quote:
|
|
09-14-2018, 07:22 PM | #3 |
|
I have moved mine. As long as you use quality wires you won't have a problem. I bought bulk Taylor wires, boots and terminals from Summit and made my own. Just make sure you have a set of crimpers that are designed for spark plug terminals. My wires are about 4ft. long.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
09-14-2018, 07:43 PM | #4 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
I mounted mine on the frame rails right in front of the radiator. Bought a universal wire kit and custom made the wires to length... no issues here
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
09-14-2018, 10:34 PM | #5 |
Drives: 1992 LS3 Typhoon Join Date: Jul 2017
Location: Michigan
Posts: 60
|
Thank you for the info! You can quickly eat up a lot of length going around things. I’ll try to keep 3’ as my max length.
|
09-15-2018, 05:56 AM | #6 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,580
|
Can you see mine? If you look real close, you will see the wires going into the inner fender wells. Work done by Vengeance Racing.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
09-15-2018, 10:27 AM | #7 |
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 5,587
|
The ohms per foot loss can be seen in tests conducted by granatelli I use their zero ohms. also many varied set ups for cleaning up the engine bay in the sticky thread from the Moreno motorsports old post up top of the engine section page.
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data, Carbon, Nav, RotoFab Dry CAI, Elite x2, Borla ATK, Driveshaft shop
|
09-15-2018, 02:42 PM | #8 | |
|
Quote:
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
|
09-15-2018, 02:55 PM | #9 |
|
Agreed with all post above. As long as you use a good wire kit you’ll be fine. I’m sure you could get 5’ before you run into issues but would try to stay within 2-4’ just to be sure. I moved mine on the frame rails 3 years ago and never have had any issues.
__________________
Car mods: never enough!
|
09-15-2018, 02:58 PM | #10 |
|
__________________
Car mods: never enough!
|
09-15-2018, 04:11 PM | #11 |
Drives: 1992 LS3 Typhoon Join Date: Jul 2017
Location: Michigan
Posts: 60
|
Thanks everyone! Cars look great, never liked the coil packs on the valve covers.
|
09-20-2018, 05:10 PM | #12 | |
Drives: 2011 Camaro SS Join Date: Nov 2010
Location: Greeley, CO
Posts: 769
|
Quote:
__________________
2011 Camaro SS Synergy Green
CAI Cold Air Induction, ADM Race Scoop, Apex Washer Bottle Kit, Vengeance Racing Kaotic Cam, DOD/VVT delete and LS3 conversion, American Racing LT Headers, American Racing Headers Off Road pipes, Borla S-Type Catback, FTI Billet Triple Disk 3600 rpm Torque Converter, DSS Aluminium Drive Shaft, AAC Plasma DRL's, Showstopper LED Sidemarkers,Carbon FIber Bow Ties, 35% Window Tint, Llyod's Floor Mats, JBL MS-8 Sound Processor, 2 Alpine PDX-1.600, Alpine PDX-4.100, JL Audio C5-650, JL Audio C5-650x, Alpine T10 Type R Shallow Mount, Stinger Dry Cell Battery |
|
|
|
|
|