MGW SS RACE KNOB FOR M6 >>> - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gtbaldini · 10-11-2009, 12:38 PM

Question for George at MGW-I was at the Hennesey Site and saw your shifter for sale there. They also have a knob with the Hennesey H on the top. Is that your shifter knob with a different top?

T_MECO · 10-11-2009, 11:33 PM

When and where do we order the MGW comp race knob

MGW · 10-12-2009, 01:49 PM

Quote:

Originally Posted by T_MECO

When and where do we order the MGW comp race knob

you can order them by calling us 706-793-1770

here are 2 videos.... 1 shows how to install the race knob in the boot...the other shows how to install the gripper boot adapter ....

regards
george

and YES we can do them in red...ill get a pic in a little bit let me run one off

DetroitMuscle2010 · 10-12-2009, 02:02 PM

I like it alot, cant wait to install one

MGW · 10-12-2009, 02:26 PM

Quote:

Originally Posted by gtbaldini

Question for George at MGW-I was at the Hennesey Site and saw your shifter for sale there. They also have a knob with the Hennesey H on the top. Is that your shifter knob with a different top?

yes that is our knob

george

EAkrish · 10-12-2009, 03:57 PM

MGW.... any answer to my question?

MGW · 10-12-2009, 06:31 PM

Quote:

Originally Posted by EAkrish

So if you just want the knob, will it sit lower than stock? I'm confused.....

sorry man i didnt see your post at first...

it will sit just a hair lower than the stock knob

george

EAkrish · 10-12-2009, 09:07 PM

Cool, you said in a recent post I think, that it will sit way low. Is that the hole assembly you were referring too?

markssylver · 10-12-2009, 10:35 PM

i just recieved my race knob today and installed it it fits great and has no more side to side movement in it s attatchment at all like the stock knob does havent been able to drive it yet since someone stole my wheels last week but so far it is a great product

caverman · 10-13-2009, 12:14 AM

Quote:

Originally Posted by EAkrish

Cool, you said in a recent post I think, that it will sit way low. Is that the hole assembly you were referring too?

I think what George was saying is that if you use the Race knob, which uses the OEM shaft, the height will be slightly lower than stock. If you go with the Round or Gripper knob you'll have to use a different shaft that has threads to allow you to screw on the knob. That shaft is significantly lower than factory.

So...if you want the Race knob it will basically be just lower than the stock height.

My guess is that the Race knob will fit on the factory shifter but the Gripper or Round knob you'll need to change out the shifter.

gtbaldini · 10-13-2009, 12:36 AM

I want one.

jjmil03 · 10-13-2009, 12:52 AM

A few questions:

The smooth knob in your first pic that you posted - that will fit on the OEM shaft, correct?

How easy is it to get the old knob off and add the new one? It looks like I would have to take the whole center console apart?

If it does take another shaft, how hard is that to install?

Thanks! Sweet product!!

Jon

GQ4Life · 10-13-2009, 09:36 AM

interior of the SS painted red!!!!

GQ4Life · 10-13-2009, 09:38 AM

like the SS knob.. but might want it lower.. if I feel I want it lower can you guys shorten shaft?

10-11-2009, 11:33 PM	#44
T_MECO Drives: 2013 SS/RS 1LE Join Date: Jun 2009 Location: Houston Posts: 386 View My Garage	When and where do we order the MGW comp race knob __________________ http://camarorocket.blogspot.com/ http://1968firebird.blogspot.com/

10-12-2009, 03:57 PM	#48
EAkrish Scout Sniping Drives: 2010 Ford F150 Lariat SuperCrew Join Date: Apr 2009 Location: Tampa, FL Posts: 762	MGW.... any answer to my question? __________________ Eric Previous Car:1SS/CGM 6MT w/ Sunroof & FACTORY BLUETOOTH!!!: New Era OTR, Steeda Short Shifter, Ported TB, Stg 2 ported intake manifold, Fasterproms, Poor man down pipes, MBRP 3" Exhaust!!! Now I drive a F150 Supercrew

10-12-2009, 09:07 PM	#50
EAkrish Scout Sniping Drives: 2010 Ford F150 Lariat SuperCrew Join Date: Apr 2009 Location: Tampa, FL Posts: 762	Cool, you said in a recent post I think, that it will sit way low. Is that the hole assembly you were referring too? __________________ Eric Previous Car:1SS/CGM 6MT w/ Sunroof & FACTORY BLUETOOTH!!!: New Era OTR, Steeda Short Shifter, Ported TB, Stg 2 ported intake manifold, Fasterproms, Poor man down pipes, MBRP 3" Exhaust!!! Now I drive a F150 Supercrew

10-13-2009, 09:36 AM	#55
GQ4Life Drives: 2010 Camaro SS LS3 Join Date: Aug 2009 Location: Fishkill, NY Posts: 5,197 View My Garage	interior of the SS painted red!!!! __________________ 2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21

10-13-2009, 09:38 AM	#56
GQ4Life Drives: 2010 Camaro SS LS3 Join Date: Aug 2009 Location: Fishkill, NY Posts: 5,197 View My Garage	like the SS knob.. but might want it lower.. if I feel I want it lower can you guys shorten shaft? __________________ 2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21

10-11-2009, 12:38 PM	#43
gtbaldini Drives: 2010 Cyber Grey 2SS/RS LS3 Join Date: Jul 2009 Location: Albuquerque Posts: 153	Question for George at MGW-I was at the Hennesey Site and saw your shifter for sale there. They also have a knob with the Hennesey H on the top. Is that your shifter knob with a different top?

10-12-2009, 02:02 PM	#46
DetroitMuscle2010 Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Detroit, MI Posts: 81	I like it alot, cant wait to install one

10-12-2009, 10:35 PM	#51
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 332	i just recieved my race knob today and installed it it fits great and has no more side to side movement in it s attatchment at all like the stock knob does havent been able to drive it yet since someone stole my wheels last week but so far it is a great product

10-13-2009, 12:36 AM	#53
gtbaldini Drives: 2010 Cyber Grey 2SS/RS LS3 Join Date: Jul 2009 Location: Albuquerque Posts: 153	I want one.

10-13-2009, 12:52 AM	#54
jjmil03 Drives: 2010 Camaro 2SS/RS Join Date: Aug 2009 Location: Spring Lake, NC Posts: 7	A few questions: The smooth knob in your first pic that you posted - that will fit on the OEM shaft, correct? How easy is it to get the old knob off and add the new one? It looks like I would have to take the whole center console apart? If it does take another shaft, how hard is that to install? Thanks! Sweet product!! Jon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM Heritage Collection - sale	Moose	5th Gen Camaro SS LS LT General Discussions	65	06-27-2013 03:28 PM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-05-2010 12:49 AM
Silver SS in Lincoln at the SCCA race	Scourage	USA - Rockies / Midwest	0	05-03-2009 01:07 PM
BUDWEISER SHOOTOUT LINE UP	CamaroScotty	General Automotive + Other Cars Discussion	22	02-07-2009 08:03 PM
Camaro LS / LT / RS / SS specs and options!	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	119	09-02-2008 10:46 PM