Hendrix Engineering Differential Bushings @ Phastek Performance - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sales@Phastek · 03-24-2017, 04:52 PM

NOW AVAILABLE!!

FREE SHIPPING @ Phastek Performance!!

IN-STOCK AND READY TO SHIP!!

The Hendrix bushings are a great way to help eliminate wheel hop and decrease 60ft times in the quarter mile. Their offset design accounts for the articulation of the factory suspension under heavy load and will benefit the half shafts by taking some of the deflection caused by a heavy load.

Phastek Performance offers 3 different versions of this kit. The Polyurethane will be the softest version available and Delrin will be the hardest version available. BUT what we have done is come up with a kit that will get you the best of both worlds, the Combo will give you 1 Delrin and 2 Polyurethane.

Features:
Helps eliminate wheel hop
Increases holding power of axles
Decreases 60ft time
Increases longevity of CV joints

Fits:
Camaro SS, 1LE, and ZL1

Polyurethane:

Delrin:

Combo (1 Delrin and 2 Polyurethane):

Sales@Phastek · 05-12-2017, 02:45 PM

Clarkstar · 11-29-2018, 07:48 PM

Do you have any of these in stock??? Looks like everyone is out... what's up with that?

flht99b · 12-09-2018, 03:17 PM

Yes, looking for a poly set myslf.

03-24-2017, 04:52 PM	#1
Sales@Phastek Drives: 2016 1SS, 2010 Camaro SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,883	Hendrix Engineering Differential Bushings @ Phastek Performance NOW AVAILABLE!! FREE SHIPPING @ Phastek Performance!! IN-STOCK AND READY TO SHIP!! The Hendrix bushings are a great way to help eliminate wheel hop and decrease 60ft times in the quarter mile. Their offset design accounts for the articulation of the factory suspension under heavy load and will benefit the half shafts by taking some of the deflection caused by a heavy load. Phastek Performance offers 3 different versions of this kit. The Polyurethane will be the softest version available and Delrin will be the hardest version available. BUT what we have done is come up with a kit that will get you the best of both worlds, the Combo will give you 1 Delrin and 2 Polyurethane. Features: Helps eliminate wheel hop Increases holding power of axles Decreases 60ft time Increases longevity of CV joints Fits: Camaro SS, 1LE, and ZL1 Polyurethane: Delrin: Combo (1 Delrin and 2 Polyurethane): __________________

05-12-2017, 02:45 PM	#2
Sales@Phastek Drives: 2016 1SS, 2010 Camaro SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,883	__________________

11-29-2018, 07:48 PM	#3
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Do you have any of these in stock??? Looks like everyone is out... what's up with that? __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

12-09-2018, 03:17 PM	#4
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,584 View My Garage	Yes, looking for a poly set myslf. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter, SS brake lines ZLI calipers, rotors/pads BMR Trailing & Toe Arms, rear cradle/diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers, HF cats, GMPP axle back, Elite Eng Catch Can, Black ZL1 20x10 & 2011 whls 285/35/20 & 305/35/20 General G-Max RS, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console, hand brake lever, Grant steering whl.