What Did You Do To Your Camaro Today? - Page 1578 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

anthony.martinez · 04-11-2019, 10:24 AM

Quote:

Originally Posted by Benman

Did you spray on or brush? How much product does it take to do both long tube headers? Is blasting absolutely necessary, if so what media works best? Thanks in advance.

Yes blasting is a must. I just used sugar sand for this step. I purchased 8oz to do the long tubes and I did spray it with a hvlp gravity feed gun. I did not do the inside of the headers but sprayed in the collector and the primary openings. I will try and upload a picture in a bit

xstuntman · 04-11-2019, 10:25 AM

Just ordered lug nuts and tpms to make the new '17 SS wheels fit.
Tires are next.

Mr2Hard2See · 04-11-2019, 02:40 PM

Rerouted the intake hose to go behind my pulley. It’s better now

George-CZ · 04-12-2019, 09:41 AM

Today I buy new tires... (Only TPMS is missing)

and at work I found a piece of a very shiny stainless steel plate.

Emblem I had a long time in the table to make a decoration, but then the plan did not take place, so I made emblem on engine cover.

Taylortoons · 04-12-2019, 10:56 AM

Wow. That is a super clean SS you've got there. Glad to have you represent V8 American muscle in the CZ!

Pagliaro · 04-12-2019, 11:12 AM

Going to dealer to get husky floor liners

Benman · 04-12-2019, 11:17 AM

Quote:

Originally Posted by anthony.martinez

Yes blasting is a must. I just used sugar sand for this step. I purchased 8oz to do the long tubes and I did spray it with a hvlp gravity feed gun. I did not do the inside of the headers but sprayed in the collector and the primary openings. I will try and upload a picture in a bit

Thanks for the info, that looks excellent.

J Rod · 04-12-2019, 01:20 PM

What's that car on the right George? Maybe it's just the angle, but that hood looks like it's 12' long.

George-CZ · 04-12-2019, 01:24 PM

Quote:

Originally Posted by Taylortoons

Wow. That is a super clean SS you've got there. Glad to have you represent V8 American muscle in the CZ!

Thank you. I always liked your car culture.
But it's not easy. The local authorities are not lenient too American cars.
In addition, prices for post and taxes for parts...

But it's worth it

George-CZ · 04-12-2019, 01:37 PM

Quote:

Originally Posted by J Rod

What's that car on the right George? Maybe it's just the angle, but that hood looks like it's 12' long.

This is my first Camaro- 78 Type LT with 383 J Rod.

Of course, with the same care as the 2010 SS

J Rod · 04-12-2019, 02:18 PM

Wow! That is a beauty!

Moto-Mojo · 04-12-2019, 02:28 PM

Changed my oil for like the 6th or 7th time in 13,000 miles. I lost count. I know, it’s a sickness.

George-CZ · 04-12-2019, 02:51 PM

Quote:

Originally Posted by J Rod

Wow! That is a beauty!

Thank you

Tajefe Couple · 04-12-2019, 04:50 PM

Quote:

Originally Posted by George-CZ

This is my first Camaro- 78 Type LT with 383 J Rod.

Of course, with the same care as the 2010 SS

Both very nice should be extremely proud of both.
Bet they get attention everywhere you go. Can't imagine to many rolling around where you live

04-11-2019, 10:25 AM	#22080
xstuntman Drives: 2012 Victory Red LFX Join Date: Dec 2012 Location: west central Texas Posts: 1,373	Just ordered lug nuts and tpms to make the new '17 SS wheels fit. Tires are next. __________________ '18 SS wheels, colored matched Heritage grille, actual driving lights, ZL1 strut tower brace, GM Performance billet aluminum fuel door, victory red rotors and calipers, 1/4 window American flags, splash guards, AEM dry panel air filter, Hot Wheels steering wheel and seat covers, Hot Wheels exterior emblems.

04-11-2019, 02:40 PM	#22081
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	Rerouted the intake hose to go behind my pulley. It’s better now Attached Images __________________ YOUTUBE CHANNEL: Mr2Hard2See LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers

04-12-2019, 10:56 AM	#22083
Taylortoons Drives: 2011 2SS/RS LS3 Join Date: Apr 2017 Location: Dallas Posts: 482	Wow. That is a super clean SS you've got there. Glad to have you represent V8 American muscle in the CZ! __________________ GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD

04-12-2019, 11:12 AM	#22084
Pagliaro RIP Betsy ( Vitara ) Drives: '11 SGM 1LT/RS Join Date: Oct 2012 Location: Ottawa, Ontario Posts: 1,178	Going to dealer to get husky floor liners __________________ First retrofitted 2014 mylink.

04-12-2019, 01:20 PM	#22086
J Rod Drives: '14 BRM 1LE 2SS/RS Join Date: Nov 2017 Location: Ft. Wayne, IN Posts: 804	What's that car on the right George? Maybe it's just the angle, but that hood looks like it's 12' long. __________________ *592 HP/590 TQ* LSA Blower w/ 2.45 Griptec, Reinforced Brick, FIC 1000 injectors, JRE FPCM, LFP Dual Pass HX, ZL1 IC pump, RotoFab CAI, Bo White TB, Coated Stainless Power 1-7/8" LTs, NPP, NGK TR7IX, Mighty Mouse Wild CC, AEM X-Series WB, Aeroforce Interceptor, MGW Shifter, Z28 Grill, Gary's Custom ZL1 Rockers, Hero Tails, Tuned by IMC

04-12-2019, 09:41 AM	#22082
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,611	Today I buy new tires... (Only TPMS is missing) and at work I found a piece of a very shiny stainless steel plate. Emblem I had a long time in the table to make a decoration, but then the plan did not take place, so I made emblem on engine cover.

04-12-2019, 02:18 PM	#22089
J Rod Drives: '14 BRM 1LE 2SS/RS Join Date: Nov 2017 Location: Ft. Wayne, IN Posts: 804	Wow! That is a beauty!

04-12-2019, 02:28 PM	#22090
Moto-Mojo Fast Cars and Old Guitars Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012 Location: N. CA Posts: 4,219	Changed my oil for like the 6th or 7th time in 13,000 miles. I lost count. I know, it’s a sickness. __________________ “I don’t want to belong to any club that would have me as a member.” - Groucho Marx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM