Monster Billet bearing support & OEM Throwout Bearing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

booneSS13 · 05-02-2017, 02:27 PM

Brand new just received it yesterday. Haven't even started the car with it on yet. My last slave failed, so I purchased a new OEM SKF bearing by itself from a bearing vendor thinking that was the only issue and the slave itself was okay. and it ended being the entire slave. So now I'm going to a RAM unit.

I installed this throwout bearing with my slave, bolted up the transmission, and pumped the clutch petal a few times and the pedal stuck to the floor. I still got leaking brake fluid from the bellhousing like before. That's all I did with it.

You usually have to buy the bearing together with the slave which is $429 from GM. if you just need a replacement bearing minus the whole slave cylinder this is for you.

$40 shipped.

Also selling the Monster Billet bearing support. About 6k miles on it. The finished is scratched up on the inside because of previous slave failure, but it does not effect the functionality of piece at all. Will post pictures soon.

$45 shipped

Zl1dad · 04-08-2019, 06:11 PM

Quote:

Originally Posted by booneSS13

Brand new just received it yesterday. Haven't even started the car with it on yet. My last slave failed, so I purchased a new OEM SKF bearing by itself from a bearing vendor thinking that was the only issue and the slave itself was okay. and it ended being the entire slave. So now I'm going to a RAM unit.

I installed this throwout bearing with my slave, bolted up the transmission, and pumped the clutch petal a few times and the pedal stuck to the floor. I still got leaking brake fluid from the bellhousing like before. That's all I did with it.

You usually have to buy the bearing together with the slave which is $429 from GM. if you just need a replacement bearing minus the whole slave cylinder this is for you.

$40 shipped.

Also selling the Monster Billet bearing support. About 6k miles on it. The finished is scratched up on the inside because of previous slave failure, but it does not effect the functionality of piece at all. Will post pictures soon.

$45 shipped

Is this throw out bearing available still?

Sent from my HTC 10 using Tapatalk

Zl1dad · 04-08-2019, 06:12 PM

If not do you have a skf part number?

Sent from my HTC 10 using Tapatalk

Zl1dad · 04-08-2019, 06:31 PM

I found part number but where did you purchase from, not finding anything online.

Sent from my HTC 10 using Tapatalk

05-02-2017, 02:27 PM	#1
booneSS13 Drives: 2013 Camaro SS LS3 Join Date: Jun 2015 Location: Davenport IA Posts: 718	Monster Billet bearing support & OEM Throwout Bearing Brand new just received it yesterday. Haven't even started the car with it on yet. My last slave failed, so I purchased a new OEM SKF bearing by itself from a bearing vendor thinking that was the only issue and the slave itself was okay. and it ended being the entire slave. So now I'm going to a RAM unit. I installed this throwout bearing with my slave, bolted up the transmission, and pumped the clutch petal a few times and the pedal stuck to the floor. I still got leaking brake fluid from the bellhousing like before. That's all I did with it. You usually have to buy the bearing together with the slave which is $429 from GM. if you just need a replacement bearing minus the whole slave cylinder this is for you. $40 shipped. Also selling the Monster Billet bearing support. About 6k miles on it. The finished is scratched up on the inside because of previous slave failure, but it does not effect the functionality of piece at all. Will post pictures soon. $45 shipped Attached Images __________________ *Romans 5:8* But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. -Fastlane Cold Air Intake, NPP cat back exhaust, Stainless Works LT Headers, 2r max camshaft, Stage 3 Ported Heads (Manley Stainless steel values, titanium retainers, dual valve springs, bronze guides), Wiseco Forged Pistons, K1 Forged Rods, Clevite Bearings, Factory Crankshaft, Comp Cams rocker arm trunion kit, Morel 5315 lifters, JP performance single billet timing chain, Melling oil pump, Spec stage 3+ clutch and flywheel, BMR trailing arms, Nitto 555r 305/35/20. Last edited by booneSS13; 05-03-2017 at 09:42 AM.

04-08-2019, 06:12 PM	#3
Zl1dad Account Suspended Drives: 2013 zl1 Join Date: Aug 2017 Location: Dearborn Posts: 253	If not do you have a skf part number? Sent from my HTC 10 using Tapatalk

04-08-2019, 06:31 PM	#4
Zl1dad Account Suspended Drives: 2013 zl1 Join Date: Aug 2017 Location: Dearborn Posts: 253	I found part number but where did you purchase from, not finding anything online. Sent from my HTC 10 using Tapatalk