Livernois Motorsports - Magnacharger TVS 2300 Purchase and Installation - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chris@Livernois · 10-15-2009, 10:10 AM

Quote:

Originally Posted by JProberts

So you guys do not offer a custom cover yet? Do you know of any clients that have purchased a custom cover after your installation?

Thanks

We haven't developed a cover yet. I haven't seen one out there yet... Maybe it's something we'll look into.

Thank you,

Rick

Carlos Garza · 10-15-2009, 10:12 AM

Quote:

Originally Posted by Rick@Livernois

Our package consists of:

Magnacharger MP2300 Supercharger
Water-to-Air Intercooler
Cast Aluminum Intake Manifold
Fuel System Upgrades (Incl. 60# Injectors)
NGK TR6 Spark Plugs
160 Degree Thermostat
Livernois Motorsports Custom Dyno Tune
Professional Installation

This is with the stock pulley, but we order all kits with no tuner and custom tune them on the dyno.

Thank you,

Rick

The car is awesome, congrats you guys do an awesome job... did you install headers and exhaust in this car? For an M6 with a SC, do you guys recommend headers of 1 7/8 or 1 3/4?

I also would like to know if it’s ok to install a SC if you can only get your hands on 91 octane gas.

Thanks,

Abygale · 10-15-2009, 10:19 AM

Rick, are you guys working on anything for the V6? I'm looking to supercharge mine. Thanks.

Chris@Livernois · 10-15-2009, 10:24 AM

Quote:

Originally Posted by Abygale

Rick, are you guys working on anything for the V6? I'll looking to supercharge mine. Thanks.

I don't know of anything at this time, but if someone releases a supercharger, we could definitely make a package for the V6 cars.

-Rick

It`s got to be fast · 10-15-2009, 10:47 AM

Lingerfelter offers custom coil covers.

JProberts · 10-15-2009, 11:58 AM

Quote:

Originally Posted by It`s got to be fast

Lingerfelter offers custom coil covers.

Do you have them or have seen them on another camaro?

lawdogg149 · 10-15-2009, 12:00 PM

You can cut your factory one and make it fit. There is a post on here somewhere were someone has done it.

JProberts · 10-15-2009, 12:13 PM

Quote:

Originally Posted by lawdogg149

You can cut your factory one and make it fit. There is a post on here somewhere were someone has done it.

Thanks I will look for that thread.

It`s got to be fast · 10-15-2009, 02:16 PM

JP I think it was SPEED74SS that I saw the pictures of the coil covers

rico-2SS · 10-15-2009, 04:20 PM

Quote:

Originally Posted by Rick@Livernois

Our package consists of:

Magnacharger MP2300 Supercharger
Water-to-Air Intercooler
Cast Aluminum Intake Manifold
Fuel System Upgrades (Incl. 60# Injectors)
NGK TR6 Spark Plugs
160 Degree Thermostat
Livernois Motorsports Custom Dyno Tune
Professional Installation

This is with the stock pulley, but we order all kits with no tuner and custom tune them on the dyno.

Thank you,

Rick

I so need to talk to you guys.....

Chris@Livernois · 10-15-2009, 04:28 PM

Quote:

Originally Posted by rico-2SS

I so need to talk to you guys.....

Feel free to call and if you're ever in our neck of the woods, stop by and check out the shop.

-Rick

Stang Stomper · 10-15-2009, 06:03 PM

Great looking dyno sheet, very impressive!

Mark-HD · 10-15-2009, 10:37 PM

Rick,

I am looking to have my car supercharged. Currently I have a Roto-Fab CAI and Corsa catbacks. I have found several shops that will do the $6999 install but none in my area. Can you explore my options. Pickup etc. I am in Atlanta Georgia. Best I've found around here is much higher. Also I read if we transport it saves tax. The other issue is this my only transportation so the timing is an issue as well.

Speed74SS · 10-16-2009, 12:15 AM

Quote:

Originally Posted by It`s got to be fast

JP I think it was SPEED74SS that I saw the pictures of the coil covers

I have the same ones as 570-LPE has, except mine are black - here is his thread. They are on the first page. They clean up the engine quite a bit.

http://www.camaro5.com/forums/showthread.php?t=46201

10-15-2009, 10:19 AM	#73
Abygale Drives: . Join Date: Jul 2009 Location: . Posts: 2,523 View My Garage	Rick, are you guys working on anything for the V6? I'm looking to supercharge mine. Thanks. Last edited by Abygale; 10-15-2009 at 11:43 AM.

10-15-2009, 10:37 PM	#83
Mark-HD Drives: 2010 Inferno Orange SS Join Date: Sep 2009 Location: Atlanta, Ga. Posts: 226	Rick, I am looking to have my car supercharged. Currently I have a Roto-Fab CAI and Corsa catbacks. I have found several shops that will do the $6999 install but none in my area. Can you explore my options. Pickup etc. I am in Atlanta Georgia. Best I've found around here is much higher. Also I read if we transport it saves tax. The other issue is this my only transportation so the timing is an issue as well. __________________ 2010 Camaro SS, M6, MTI shifter and sway bars, GM quarter flares, Corsa catback, Roto-Fab CAI, 30% tinted windows, Lloyd's custom mats, Hawk ceramic pads, Pedders lower coils, Magnuson supercharger with 3.6 pulley, BMR trailing arms & toe rods, Kook's LT's1 7/8 w/cats, Lingenfelter/SLP billet pedals, KW V'3 Coilovers, RevExtreme catch can, ---Ordered--- IconZ LS7 9 & 11" polished wheels!. Dyno'd 563.05 HP, 543.86 Torq.

10-15-2009, 10:47 AM	#75
It`s got to be fast Drives: 2ssrs Join Date: Jul 2009 Location: virginia Posts: 16	Lingerfelter offers custom coil covers.

10-15-2009, 12:00 PM	#77
lawdogg149 Drives: Corvette ZO6 CSR edition #47 Join Date: Apr 2009 Location: Calhoun, GA Posts: 766 View My Garage	You can cut your factory one and make it fit. There is a post on here somewhere were someone has done it.

10-15-2009, 02:16 PM	#79
It`s got to be fast Drives: 2ssrs Join Date: Jul 2009 Location: virginia Posts: 16	JP I think it was SPEED74SS that I saw the pictures of the coil covers

10-15-2009, 06:03 PM	#82
Stang Stomper Drives: a Camaro...in my dreams Join Date: Oct 2009 Location: Poway, CA Posts: 13	Great looking dyno sheet, very impressive!