You are browsing camaro5 
 |
|
07-04-2019, 01:15 AM
|
#1 |
 
Drives: Chevrolet camaro 2010 LTZ Join Date: Jun 2018
Location: United Arab Emirates
Posts: 7
|
Camaro 2010 V6 no crank no start
hi all i hope someone can help me out with problem
here's the story and sorry for my English the car generally work fine until this problem is happen so whenever i try to start the car put the key as usual turn to on then start boom nothing happen stabilietrack service pop up and parking assists service pop up also check engine go off and fuel gauge down to zero try to start the car again nothing same so what I'm doing I'm going to the harness connect to the EBCM and move it little the harness not the connector after that the car back normal and start like new doing the same issues for like 2 to 3 month so i decide to change all the harness from the EBCM going to fuse box box to instrument cluster after changing all the work fine for like 15 days without any issues suddenly today she do the same problem try to start the car nothing i touched again the harness near ebcm in the same place the car start normally with scan tool get code U0100 and U0101 lost communication with ECM / PCM A and lost communication with TCM if anyone face the same problem plz let me know how to fix this issue video showing the issue https://youtu.be/BYUtOQI4FSU Last edited by frmd; 07-04-2019 at 03:08 AM. Reason: forget to add link of video on youtube |
|
|
|
07-04-2019, 07:53 AM
|
#2 |
|
Drives: Chevrolet camaro 2010 LTZ Join Date: Jun 2018
Location: United Arab Emirates
Posts: 7
|
screen of scan code error
here's the code error I'm getting whatever the car doesn't star
|
|
|
|
|
07-10-2019, 05:16 PM
|
#3 |
|
Drives: Chevrolet camaro 2010 LTZ Join Date: Jun 2018
Location: United Arab Emirates
Posts: 7
|
UPDATE
juste change all the harness from abs to bcm to fuse box and change EBCM also but the problem still the engine not start sometime and need to touch the harness near abs then the car can start |
|
|
|
|
07-10-2019, 10:48 PM
|
#4 |
 Drives: 2012 IOM SS/RS Join Date: Sep 2017
Location: Georgia
Posts: 92
|
Maybe a cold solder joint or cracked land on the printed circuit board.
__________________
 |
|
|
|
|
03-10-2020, 09:20 PM
|
#5 |
 Drives: 2010 Join Date: Mar 2020
Location: Ohio
Posts: 3
|
I am having the same problem what did you figure out? Dealer is up to $1800 bill they are replacing the ecm and ebcm
|
|
|
|
|
03-11-2020, 08:35 AM
|
#6 | |
|
Drives: 2010 Join Date: Mar 2020
Location: Ohio
Posts: 3
|
Quote:
I left mine parked outside for 2 months, it drained the battery, I tried to charge the battery trough terminal under hood using body ground, seemed to draw a lot at first connecting, then seemed to charge OK but not completely, then I connected charger directly to battery and charged overnight , still no start, I then replaced battery and still no start, Dealer said modules not communicating and is replacing the ECM and EBCM to start anyone know whats going on. |
|
|
|
|
|
|
|
|
 |
|
|
