What vents to use with Hines Hex Vents Gone - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroCracka · 07-24-2019, 04:25 PM

I'm thinking in the future I may need heat extractor/hood vents to remove heat and give underhood air some place to go.

What are guys using now that Hines does not make the Hex Vents? I don't have anything against the 1LE/Z28 vent, but I have the rally stripes and I don't like the idea of a vent in the middle of those stripes.

hammdo · 07-24-2019, 05:17 PM

2014/2015 factory vent or these:

https://www.summitracing.com/tx/part...hl-b/overview/

They fit:

-Don

CamaroCracka · 07-26-2019, 11:09 AM

Thanks Don

SSEssence · 07-26-2019, 11:30 AM

Those Iroc style vents are badass!

hammdo · 07-26-2019, 11:46 AM

Saw those at NCM during CFest. Fit was very nice and the owner said no issues...

-Don

blk_on_blk · 07-28-2019, 06:55 PM

Funny that I just found this thread since installing the Track Spec ST2 Z28 hood louvers over the weekend. Here are a few pics from the install process and the look afterwards. I couldn't be happier with the results.

Tajefe Couple · 07-28-2019, 09:27 PM

Quote:

Originally Posted by blk_on_blk

Funny that I just found this thread since installing the Track Spec ST2 Z28 hood louvers over the weekend. Here are a few pics from the install process and the look afterwards. I couldn't be happier with the results.

Looks really good

How long did the job take you?

CamaroCracka · 07-29-2019, 06:23 AM

What size are those? That is pretty much what I am looking for, but a little smaller to fit within the stripes.

StingrayblueSS · 07-29-2019, 01:17 PM

I'd like a vented hood but not one that looks like it belongs on a house.

blk_on_blk · 07-31-2019, 02:18 PM

Quote:

Originally Posted by Tajefe Couple

Looks really good

How long did the job take you?

From start to finish, it took about 3hrs. I had to make several cuts to the support structures under the hood which was probably the hardest part of the whole install.

blk_on_blk · 07-31-2019, 02:19 PM

Quote:

Originally Posted by StingrayblueSS

I'd like a vented hood but not one that looks like it belongs on a house.

Thats cool...you don't like it. Find another option that performs as well as this one from trackspecmotorsports

blk_on_blk · 07-31-2019, 02:20 PM

Quote:

Originally Posted by CamaroCracka

What size are those? That is pretty much what I am looking for, but a little smaller to fit within the stripes.

I'd have to measure to get the exact dimensions, but check it out on trackspecmotorsports.com , that'll have your info there.

CamaroCracka · 07-31-2019, 05:01 PM

Thanks

John_C · 07-27-2023, 09:22 AM

Quote:

Originally Posted by blk_on_blk

Funny that I just found this thread since installing the Track Spec ST2 Z28 hood louvers over the weekend. Here are a few pics from the install process and the look afterwards. I couldn't be happier with the results.

That's badass! I'm about to order this!

How difficult was it to install?

How long it take you?

Should I add the side vents?

Thanks!

07-24-2019, 04:25 PM	#1
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 3,042	What vents to use with Hines Hex Vents Gone I'm thinking in the future I may need heat extractor/hood vents to remove heat and give underhood air some place to go. What are guys using now that Hines does not make the Hex Vents? I don't have anything against the 1LE/Z28 vent, but I have the rally stripes and I don't like the idea of a vent in the middle of those stripes. __________________ 2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes.

07-24-2019, 05:17 PM	#2
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	2014/2015 factory vent or these: https://www.summitracing.com/tx/part...hl-b/overview/ They fit: -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

07-26-2019, 11:09 AM	#3
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 3,042	Thanks Don __________________ 2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes.

07-26-2019, 11:46 AM	#5
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Saw those at NCM during CFest. Fit was very nice and the owner said no issues... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

07-28-2019, 06:55 PM	#6
blk_on_blk Blk_on_Blk Drives: 2012 Camaro 2SS Join Date: Sep 2014 Location: Charlotte Posts: 15	Funny that I just found this thread since installing the Track Spec ST2 Z28 hood louvers over the weekend. Here are a few pics from the install process and the look afterwards. I couldn't be happier with the results. Attached Images

07-26-2019, 11:30 AM	#4
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,836 View My Garage	Those Iroc style vents are badass!

07-29-2019, 06:23 AM	#8
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 3,042	What size are those? That is pretty much what I am looking for, but a little smaller to fit within the stripes. __________________ 2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes.

07-29-2019, 01:17 PM	#9
StingrayblueSS Drives: 2013 Camaro SS Join Date: Feb 2017 Location: Indiana Posts: 901	I'd like a vented hood but not one that looks like it belongs on a house.

07-31-2019, 05:01 PM	#13
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 3,042	Thanks __________________ 2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes.