You are browsing camaro5 
 |
|
08-07-2019, 06:23 PM
|
#1 |
  
Drives: 2011 Synergy Green 2SS/RS Join Date: Mar 2008
Location: Lexington Park, MD
Posts: 882
|
6th Gen wheels on 5th Gen SS
I am possibly acquiring a set of 6th gen wheels from a friend from his 2018 1SS. I have searched here and seen some posts saying they bolt right on no spacers or anything needed and have seen a few posts saying spacers needed.
So basically will his 2018 1SS wheels fit on my 2011 2SS without spacers. I'll be keeping the stock 5th gen tire size but that isn't an issue. Just want to make sure nothing else is needed for the wheels (I know I need to either get new or used my tpms sensors though)
__________________
Hey, you want to lay the fate of the world on the kid's Camaro? That's cool.
I bought a car, turned out to be an alien robot. Who knew? |
|
|
|
08-09-2019, 01:11 PM
|
#2 |
|
Drives: 2011 Synergy Green 2SS/RS Join Date: Mar 2008
Location: Lexington Park, MD
Posts: 882
|
Talked to a few people that did it, it will fit but the clearance to the brembos is very minimal (credit card thin was said a couple times) so they all recommended 3mm spacers.
__________________
Hey, you want to lay the fate of the world on the kid's Camaro? That's cool.
I bought a car, turned out to be an alien robot. Who knew? |
|
|
|
|
08-09-2019, 11:29 PM
|
#3 |
 
Drives: 2012 SS Camaro LS3 Join Date: Jun 2012
Location: New Jersey
Posts: 329
|
I use 5mm hub centric spacers...no issues and gives a little more clearance from the calipers.
__________________
2012 Ashen Grey LS3_ARH 1 7/8 Long tubes_Pypes Exhaust Axle Back_C.A.I._ Bo White Ported Throttle Body_Custom Black Anodized Fuel Rails_3:91 Rear ARP Stainless Bolts_MSD Wires_Elite Engineering Catch Can_MGW Flat Stick_Stewart Warner Pro Gauges_BMR Rear Suspension_ZL1 Rear Swaybar 427 HP To The Wheels_Tuned and Dyno'd by ECS  |
|
|
|
|
|
|
|
 |
|
|
