08-19-2019, 07:24 AM | #15 |
Drives: 2011 Camaro SS/RS Join Date: Feb 2011
Location: corpus christi tx
Posts: 1,046
|
I have this system for my maggie. Works great for this hot Texas heat. You wont get that much help for the guy who makes these. His instructions are terrible. Good this thing this forum offers lots of advice and help. The coolant temp with the ac runs about 56 degrees and with the competition mode it runs near mid 40s
__________________
SLP TVS 2300- 1 7/8 LG Headers- RDS NX Plate- 75 Shot- No Cats- SLP Loudmouth 2- NW102- 3.8 Pulley- OD Cog drive-12lbs boost-FIC 80# injectors-ZL1 Fuel Pump- RotoFab CAI- Apex CAI Scoop- Pat G Tune- Weld RTS drag pack- BMR Trailing Arms- BMR 1'' Drop Springs-BMR Lower Control Arms- BMR Toe Rods- BMR Rear Cradle Bushings- BMR Upper Control Arm Bushings- BMR Extreme Anti- Rollbar- Hotchkis Subframe Brace- Prosport Evo Boost & F/A Ratio
|
08-19-2019, 09:27 AM | #16 |
Drives: 2015 Supercharged Camaro 1LE Join Date: Mar 2018
Location: Orlando FL
Posts: 221
|
So what is all included in the kit ? Is it complete ?
__________________
Magnuson Supercharged 2015 1LE RS/2SS. Texas Speed Stage 3 Blower Cam. DSX Aux Pump. e85 Flex Fuel Kit. BMR Suspension. On Instagram @wakeyourneighbors @Blown1LE
|
08-19-2019, 03:12 PM | #17 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
|
08-19-2019, 03:14 PM | #18 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
|
08-28-2019, 09:44 PM | #19 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
Price drop bump. $925 shipped
|
09-06-2019, 09:08 AM | #20 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
Open to offers
|
09-20-2019, 11:37 AM | #21 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
BUMP
|
10-11-2019, 02:35 PM | #22 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
|
12-12-2019, 08:43 AM | #23 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
bump
|
01-06-2020, 09:21 AM | #24 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
Price Drop. $850 shipped!
|
02-22-2020, 06:49 PM | #25 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
Bump. Price drop $800 shipped
|
03-02-2020, 10:49 PM | #26 |
Drives: '15 Silverado LTZ & '13 ZL1 ragtop Join Date: Nov 2016
Location: Edmond, Oklahoma
Posts: 313
|
Is this a Maggie only unit or will it work with an LSA application?
|
03-03-2020, 07:53 AM | #27 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
The coolant hoses are cut for the maggie but this could easily be modified/created for the LSA with some 3/4" tubing. The rest of the kit is not blower specific. I do have another photo which shows the hoses. It is nothing too extravagant. If you are interested shoot me a PM and I can text them to you.
|
03-09-2020, 10:08 AM | #28 |
Drives: 2018 Camaro ZL1 Join Date: Mar 2013
Location: Sioux Falls, SD
Posts: 186
|
Price update. $700 shipped.
|
|
|
|
|