HID Ballasts Placement - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dcarrier · 08-20-2019, 01:59 PM

Hey guys, first post. Got a 2014 Chevy Camaro 1LS for my 21st birthday an couple months ago and I’m stoked about it. I installed HID lights, 35 watt @ 5000K, to replace the factory halogen. For those who have worked on it, I’m sure some of you have seen the spacing in the headlight behind the bulb. This is where I put my ballasts and wires. I did not want to have to drill a hole in the dust cap so the wires could come through, nor did I want to do any drilling to set the ballasts somewhere under the hood.
Is this a bad idea? Will the ballasts overheat? How did y’all do it?
Thanks!

08-20-2019, 01:59 PM	#1
dcarrier Drives: Chevrolet Camaro 1LS Join Date: Aug 2019 Location: Aberdeen, MD Posts: 2	HID Ballasts Placement Hey guys, first post. Got a 2014 Chevy Camaro 1LS for my 21st birthday an couple months ago and I’m stoked about it. I installed HID lights, 35 watt @ 5000K, to replace the factory halogen. For those who have worked on it, I’m sure some of you have seen the spacing in the headlight behind the bulb. This is where I put my ballasts and wires. I did not want to have to drill a hole in the dust cap so the wires could come through, nor did I want to do any drilling to set the ballasts somewhere under the hood. Is this a bad idea? Will the ballasts overheat? How did y’all do it? Thanks! Last edited by dcarrier; 09-20-2019 at 01:15 PM.