![]() |
|
|
#1 |
![]() ![]() ![]() |
just picked up a 2012 zl1 love it over my 2010
I bought the car in Georgia and drove it back home to Michigan with 4000 miles on it. The car handles like dream. I drove in track mode most of the way, til I hit the rough roads of Michigan. One thing I noticed is the rear quarter in front of the rear tires are getting rock chips. Mostly from Michigan roads. So I parked it in the garage til I can get some clear bra protection on the body. I'm looking at the front end 24inch up and behind the front tire and front of rear tires. And 3 inchs on the side skirts. Can anyone share there experience what else to protect or product? I have been thinking of applying it myself possibly. Anyone do it yourself?
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature Last edited by lionssfan; 08-21-2019 at 02:28 AM. |
|
|
|
|
|
#2 |
![]() ![]() ![]() Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,202
|
I have a brand new set of zl1addons rock guards I can sell you. Works great for saving the side of the car.
|
|
|
|
|
|
#3 |
|
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,810
|
A different set of tires will also help. The stock GY supercars throw pebbles like crazy.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13
Mods being installed- oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc. |
|
|
|
|
|
#4 |
|
Those who need me got me
Drives: 2022 ZL1 A10 Join Date: Aug 2017
Location: Southwest, MN
Posts: 624
|
There was a guy on here RON123 that made his own templates and did great work with Xpel. Not sure if he is still around, but we shared some PM's with info, I gave it a try, and here is what I learned:
If you want it to look perfect - hire a pro if you do not mind some imperfections - DIY Once you go the DIY route, you are sort of committed. If it does not turn out, you scrap the material and end up paying for new material. I can't bring myself to put mudflaps on a ZL1, but that is also an option. btw, nice ride, congrats!
__________________
|
|
|
|
|
|
#5 | |
![]() ![]() ![]() |
Quote:
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
|
|
#6 |
![]() ![]() ![]() |
Thanks for the offer, but not sure I can do that just yet
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
|
#7 |
|
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,551
|
I put some of this film on the hood of a car last week. It was pain to try to get all the air/water pockets out.
Genuine 3M Scotchgard PRO Series Gloss Clear Paint Protection Film Bra PPF seller m2-racing It is thick film. Can buy a size you need without so much excess roll keeping the price down. |
|
|
|
|
|
#8 | |
![]() ![]() ![]() |
Quote:
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
|
|
#9 |
![]() ![]() ![]() |
Gm should of put at least clear protection on the rear area in front of back tire. This area gets blasted with pebbles so easy.
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
|
#10 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,326
|
|
|
|
|
|
|
#11 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '17 Corvette Grand Sport M7 Join Date: May 2012
Location: Pennsylvania
Posts: 3,748
|
Quote:
__________________
MY RIDE: 2017 CORVETTE GRAND SPORT--TRIPLE BLACK, 7 SPEED MANUAL, VARARAM TCR-7 INTAKE, BORLA CATLESS X-PIPE, CARBON FIBER STAGE 2 AERO, MGW SHORT-THROW SHIFTER
**SOLD**2011 TRIPLE BLACK SS CONVERTIBLE--6 SPEED MANUAL, MANY MODS, 455 RWHP/435 RWTQ DAD'S RIDE: 2012 ZL1 #1866--BLACK, 6 SPEED MANUAL, EXPOSED CF HOOD, POLISHED WHEELS, SUNROOF, ROTO-FAB INTAKE "Silly Americans, taking from the rich and giving to the poor only works in fairy tales. Success is earned here!". |
|
|
|
|
|
|
#12 | |
![]() Drives: White 2015 Z/28 Join Date: Jul 2017
Location: Charleston SC
Posts: 208
|
Quote:
FWIW, I had the ZL1 Rock Guards on my Z/28. They actually blended well with the other little "mud flaps" already on the car. You don't really notice they are aftermarket unless you are familiar with these cars, or you look super close. |
|
|
|
|
|
|
#13 |
|
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,648
|
Congrats on the new ride. The ZL1 LSA platform is a blast. Wait till you start modding it.
|
|
|
|
|
|
#14 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ Join Date: Dec 2010
Location: Queens, NY
Posts: 4,071
|
Those are the exact areas to expect road rash; You will need a film to protect the paint. Its a shame but its also a fact of life as a ZL1 owner. The car is pretty sweet otherwise.
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic '15 Malibu LTZ 2LZ Turbo '14 CAMARO ZL1 Blue Ray Metallic '25 Silverado 1500 High Country 6.2L |
|
|
|
|
|
|
|
![]() |
|
|