08-23-2019, 06:30 PM | #1 |
Drives: 2010 Camaro 2SS/RS LS3 Join Date: Jul 2019
Location: Nova Scotia
Posts: 50
|
Oil catch can options. Which to buy
I am looking to add and oil catch can to my 2010 LS3 with 52k miles.
I also getting a SCT X4 and shopping at RDP. Steve suggested the Mishimoto but they are out of stock. I see there are others brand out there. Any one running a BBK? or a Moroso? I'm trying to buy the catch can the same time I am getting the SCT X4 to save on shipping since shipping to Canada is expensive.. Any thoughts or suggestions? And yes, I have done a forum search but the search feature isn't great. Thanks |
08-23-2019, 06:54 PM | #2 |
Drives: Victory Red 2011 2SS Join Date: Dec 2016
Location: Meridian, MS
Posts: 79
|
I really like the Mighty Mouse set up but I see it’s not one of your options.
|
08-23-2019, 07:07 PM | #3 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Ask 10 people about catch cans and you will get 50 opinions.
|
08-24-2019, 06:29 AM | #4 |
Drives: 2013 camaro SS Join Date: Aug 2019
Location: Louisiana
Posts: 199
|
I have the moroso can. Love it. Easy to drain.
|
08-24-2019, 11:04 AM | #5 |
Drives: 02 Camaro B4C Join Date: Nov 2016
Location: Cape May County NJ
Posts: 750
|
I have the Elite, well made looks real good and works very well.
__________________
A man's garage is his castle
1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel |
08-24-2019, 11:10 AM | #6 |
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 5,595
|
Elite engineering here....
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data,Red Carbon Interior, Nav, RotoFab Big Gulp , Elite x2ultra, Borla ATAK, Driveshaft shop, full BMR susp, Speed eng. valve covers, intercoolers, ATI , 2650 MAG, DSX lid, 103 NW, JBA shorties, Lingenfelter check, 1le wheels, spoiler and diveplanes, PCV, Big3racing ice tank, [SIGPIC]etc....
|
08-24-2019, 11:12 AM | #7 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
I have the Elite also. Not that I think it works any better than the others, but it does work great and I like the way it looks under the hood.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
08-26-2019, 07:31 AM | #8 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
Its a simple device. I'm sure they are all just fine. I have a Moroso on mine, It's what JRE had in stock and that's where I got my supercharger and such. Goes on the passenger side of the radiator, added a hose on the bottom with a drain do it's easy to do while doing an oil change.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
08-26-2019, 08:12 AM | #9 |
Drives: 2010 Camaro 2SS/RS LS3 Join Date: Jul 2019
Location: Nova Scotia
Posts: 50
|
I orderd a BBk when i orderd the SCt X4 from dyno steve. Im sure it will be fine.
Thanks for the advise everyone. |
08-26-2019, 09:03 AM | #10 |
i run the mishimoto catch can and couldn't be happier. I don't recall where i ordered mine from but it took a bit longer because i ordered it from a third party and they didn't have it on stock. the catch can is amazing and i super easy to install.
__________________
-------------------------------------------------------
Custom TSP Stage 2 Cam/GPI intake Ported Rod Mod /VARARAM CAI/Mishimoto Catch Can/1 LE front & rear sway bars/ engine cover/fuse box custom painted, strut tower brace, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill. |
|
|
|
|
|